From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/csky/Kconfig | 364 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 364 insertions(+) create mode 100644 arch/csky/Kconfig (limited to 'arch/csky/Kconfig') diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig new file mode 100644 index 000000000..dba02da6f --- /dev/null +++ b/arch/csky/Kconfig @@ -0,0 +1,364 @@ +# SPDX-License-Identifier: GPL-2.0-only +config CSKY + def_bool y + select ARCH_32BIT_OFF_T + select ARCH_HAS_DMA_PREP_COHERENT + select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_HAS_SYNC_DMA_FOR_CPU + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_USE_BUILTIN_BSWAP + select ARCH_USE_QUEUED_RWLOCKS + select ARCH_USE_QUEUED_SPINLOCKS + select ARCH_HAS_CURRENT_STACK_POINTER + select ARCH_INLINE_READ_LOCK if !PREEMPTION + select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION + select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION + select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPTION + select ARCH_INLINE_READ_UNLOCK if !PREEMPTION + select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPTION + select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPTION + select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPTION + select ARCH_INLINE_WRITE_LOCK if !PREEMPTION + select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPTION + select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPTION + select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPTION + select ARCH_INLINE_WRITE_UNLOCK if !PREEMPTION + select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPTION + select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPTION + select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPTION + select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPTION + select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPTION + select ARCH_INLINE_SPIN_LOCK if !PREEMPTION + select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPTION + select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPTION + select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPTION + select ARCH_INLINE_SPIN_UNLOCK if !PREEMPTION + select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPTION + select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION + select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION + select ARCH_WANT_FRAME_POINTERS if !CPU_CK610 && $(cc-option,-mbacktrace) + select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT + select COMMON_CLK + select CLKSRC_MMIO + select CSKY_MPINTC if CPU_CK860 + select CSKY_MP_TIMER if CPU_CK860 + select CSKY_APB_INTC + select DMA_DIRECT_REMAP + select IRQ_DOMAIN + select DW_APB_TIMER_OF + select GENERIC_IOREMAP + select GENERIC_LIB_ASHLDI3 + select GENERIC_LIB_ASHRDI3 + select GENERIC_LIB_LSHRDI3 + select GENERIC_LIB_MULDI3 + select GENERIC_LIB_CMPDI2 + select GENERIC_LIB_UCMPDI2 + select GENERIC_ALLOCATOR + select GENERIC_ATOMIC64 + select GENERIC_CPU_DEVICES + select GENERIC_IRQ_CHIP + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW + select GENERIC_IRQ_MULTI_HANDLER + select GENERIC_SCHED_CLOCK + select GENERIC_SMP_IDLE_THREAD + select GENERIC_TIME_VSYSCALL + select GENERIC_VDSO_32 + select GENERIC_GETTIMEOFDAY + select GX6605S_TIMER if CPU_CK610 + select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_AUDITSYSCALL + select HAVE_ARCH_JUMP_LABEL if !CPU_CK610 + select HAVE_ARCH_JUMP_LABEL_RELATIVE + select HAVE_ARCH_MMAP_RND_BITS + select HAVE_ARCH_SECCOMP_FILTER + select HAVE_CONTEXT_TRACKING_USER + select HAVE_VIRT_CPU_ACCOUNTING_GEN + select HAVE_DEBUG_BUGVERBOSE + select HAVE_DEBUG_KMEMLEAK + select HAVE_DYNAMIC_FTRACE + select HAVE_DYNAMIC_FTRACE_WITH_REGS + select HAVE_GENERIC_VDSO + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_ERROR_INJECTION + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_LZO + select HAVE_KERNEL_LZMA + select HAVE_KPROBES if !CPU_CK610 + select HAVE_KPROBES_ON_FTRACE if !CPU_CK610 + select HAVE_KRETPROBES if !CPU_CK610 + select HAVE_PERF_EVENTS + select HAVE_PERF_REGS + select HAVE_PERF_USER_STACK_DUMP + select HAVE_DMA_CONTIGUOUS + select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_STACKPROTECTOR + select HAVE_SYSCALL_TRACEPOINTS + select MAY_HAVE_SPARSE_IRQ + select MODULES_USE_ELF_RELA if MODULES + select OF + select OF_EARLY_FLATTREE + select PERF_USE_VMALLOC if CPU_CK610 + select RTC_LIB + select TIMER_OF + select GENERIC_PCI_IOMAP + select HAVE_PCI + select PCI_DOMAINS_GENERIC if PCI + select PCI_SYSCALL if PCI + select PCI_MSI if PCI + select TRACE_IRQFLAGS_SUPPORT + +config LOCKDEP_SUPPORT + def_bool y + +config ARCH_SUPPORTS_UPROBES + def_bool y if !CPU_CK610 + +config CPU_HAS_CACHEV2 + bool + +config CPU_HAS_FPUV2 + bool + +config CPU_HAS_HILO + bool + +config CPU_HAS_TLBI + bool + +config CPU_HAS_LDSTEX + bool + help + For SMP, CPU needs "ldex&stex" instructions for atomic operations. + +config CPU_NEED_TLBSYNC + bool + +config CPU_NEED_SOFTALIGN + bool + +config CPU_NO_USER_BKPT + bool + help + For abiv2 we couldn't use "trap 1" as user space bkpt in gdbserver, because + abiv2 is 16/32bit instruction set and "trap 1" is 32bit. + So we need a 16bit instruction as user space bkpt, and it will cause an illegal + instruction exception. + In kernel we parse the *regs->pc to determine whether to send SIGTRAP or not. + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_CSUM + def_bool y + +config GENERIC_HWEIGHT + def_bool y + +config MMU + def_bool y + +config STACKTRACE_SUPPORT + def_bool y + +config TIME_LOW_RES + def_bool y + +config CPU_TLB_SIZE + int + default "128" if (CPU_CK610 || CPU_CK807 || CPU_CK810) + default "1024" if (CPU_CK860) + +config CPU_ASID_BITS + int + default "8" if (CPU_CK610 || CPU_CK807 || CPU_CK810) + default "12" if (CPU_CK860) + +config L1_CACHE_SHIFT + int + default "4" if (CPU_CK610) + default "5" if (CPU_CK807 || CPU_CK810) + default "6" if (CPU_CK860) + +config ARCH_MMAP_RND_BITS_MIN + default 8 + +# max bits determined by the following formula: +# VA_BITS - PAGE_SHIFT - 3 +config ARCH_MMAP_RND_BITS_MAX + default 17 + +menu "Processor type and features" + +choice + prompt "CPU MODEL" + default CPU_CK807 + +config CPU_CK610 + bool "CSKY CPU ck610" + select CPU_NEED_TLBSYNC + select CPU_NEED_SOFTALIGN + select CPU_NO_USER_BKPT + +config CPU_CK810 + bool "CSKY CPU ck810" + select CPU_HAS_HILO + select CPU_NEED_TLBSYNC + +config CPU_CK807 + bool "CSKY CPU ck807" + select CPU_HAS_HILO + +config CPU_CK860 + bool "CSKY CPU ck860" + select CPU_HAS_TLBI + select CPU_HAS_CACHEV2 + select CPU_HAS_LDSTEX + select CPU_HAS_FPUV2 +endchoice + +choice + prompt "PAGE OFFSET" + default PAGE_OFFSET_80000000 + +config PAGE_OFFSET_80000000 + bool "PAGE OFFSET 2G (user:kernel = 2:2)" + +config PAGE_OFFSET_A0000000 + bool "PAGE OFFSET 2.5G (user:kernel = 2.5:1.5)" +endchoice + +config PAGE_OFFSET + hex + default 0x80000000 if PAGE_OFFSET_80000000 + default 0xa0000000 if PAGE_OFFSET_A0000000 +choice + + prompt "C-SKY PMU type" + depends on PERF_EVENTS + depends on CPU_CK807 || CPU_CK810 || CPU_CK860 + +config CPU_PMU_NONE + bool "None" + +config CSKY_PMU_V1 + bool "Performance Monitoring Unit Ver.1" + +endchoice + +choice + prompt "Power Manager Instruction (wait/doze/stop)" + default CPU_PM_NONE + +config CPU_PM_NONE + bool "None" + +config CPU_PM_WAIT + bool "wait" + +config CPU_PM_DOZE + bool "doze" + +config CPU_PM_STOP + bool "stop" +endchoice + +menuconfig HAVE_TCM + bool "Tightly-Coupled/Sram Memory" + depends on !COMPILE_TEST + help + The implementation are not only used by TCM (Tightly-Coupled Memory) + but also used by sram on SOC bus. It follow existed linux tcm + software interface, so that old tcm application codes could be + re-used directly. + +if HAVE_TCM +config ITCM_RAM_BASE + hex "ITCM ram base" + default 0xffffffff + +config ITCM_NR_PAGES + int "Page count of ITCM size: NR*4KB" + range 1 256 + default 32 + +config HAVE_DTCM + bool "DTCM Support" + +config DTCM_RAM_BASE + hex "DTCM ram base" + depends on HAVE_DTCM + default 0xffffffff + +config DTCM_NR_PAGES + int "Page count of DTCM size: NR*4KB" + depends on HAVE_DTCM + range 1 256 + default 32 +endif + +config CPU_HAS_VDSP + bool "CPU has VDSP coprocessor" + depends on CPU_HAS_FPU && CPU_HAS_FPUV2 + +config CPU_HAS_FPU + bool "CPU has FPU coprocessor" + depends on CPU_CK807 || CPU_CK810 || CPU_CK860 + +config CPU_HAS_ICACHE_INS + bool "CPU has Icache invalidate instructions" + depends on CPU_HAS_CACHEV2 + +config CPU_HAS_TEE + bool "CPU has Trusted Execution Environment" + depends on CPU_CK810 + +config SMP + bool "Symmetric Multi-Processing (SMP) support for C-SKY" + depends on CPU_CK860 + default n + +config NR_CPUS + int "Maximum number of CPUs (2-32)" + range 2 32 + depends on SMP + default "4" + +config HIGHMEM + bool "High Memory Support" + depends on !CPU_CK610 + select KMAP_LOCAL + default y + +config ARCH_FORCE_MAX_ORDER + int "Maximum zone order" + default "11" + +config DRAM_BASE + hex "DRAM start addr (the same with memory-section in dts)" + default 0x0 + +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + select GENERIC_IRQ_MIGRATION + depends on SMP + help + Say Y here to allow turning CPUs off and on. CPUs can be + controlled through /sys/devices/system/cpu/cpu1/hotplug/target. + + Say N if you want to disable CPU hotplug. + +config HAVE_EFFICIENT_UNALIGNED_STRING_OPS + bool "Enable EFFICIENT_UNALIGNED_STRING_OPS for abiv2" + depends on CPU_CK807 || CPU_CK810 || CPU_CK860 + help + Say Y here to enable EFFICIENT_UNALIGNED_STRING_OPS. Some CPU models could + deal with unaligned access by hardware. + +endmenu + +source "arch/csky/Kconfig.platforms" + +source "kernel/Kconfig.hz" -- cgit v1.2.3