From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/csky/abiv2/mcount.S | 211 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 211 insertions(+) create mode 100644 arch/csky/abiv2/mcount.S (limited to 'arch/csky/abiv2/mcount.S') diff --git a/arch/csky/abiv2/mcount.S b/arch/csky/abiv2/mcount.S new file mode 100644 index 000000000..d745e10c1 --- /dev/null +++ b/arch/csky/abiv2/mcount.S @@ -0,0 +1,211 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. + +#include +#include +#include +#include + +/* + * csky-gcc with -pg will put the following asm after prologue: + * push r15 + * jsri _mcount + * + * stack layout after mcount_enter in _mcount(): + * + * current sp => 0:+-------+ + * | a0-a3 | -> must save all argument regs + * +16:+-------+ + * | lr | -> _mcount lr (instrumente function's pc) + * +20:+-------+ + * | fp=r8 | -> instrumented function fp + * +24:+-------+ + * | plr | -> instrumented function lr (parent's pc) + * +-------+ + */ + +.macro mcount_enter + subi sp, 24 + stw a0, (sp, 0) + stw a1, (sp, 4) + stw a2, (sp, 8) + stw a3, (sp, 12) + stw lr, (sp, 16) + stw r8, (sp, 20) +.endm + +.macro mcount_exit + ldw a0, (sp, 0) + ldw a1, (sp, 4) + ldw a2, (sp, 8) + ldw a3, (sp, 12) + ldw t1, (sp, 16) + ldw r8, (sp, 20) + ldw lr, (sp, 24) + addi sp, 28 + jmp t1 +.endm + +.macro mcount_enter_regs + subi sp, 8 + stw lr, (sp, 0) + stw r8, (sp, 4) + SAVE_REGS_FTRACE +.endm + +.macro mcount_exit_regs + RESTORE_REGS_FTRACE + subi sp, 152 + ldw t1, (sp, 4) + addi sp, 152 + ldw r8, (sp, 4) + ldw lr, (sp, 8) + addi sp, 12 + jmp t1 +.endm + +.macro save_return_regs + subi sp, 16 + stw a0, (sp, 0) + stw a1, (sp, 4) + stw a2, (sp, 8) + stw a3, (sp, 12) +.endm + +.macro restore_return_regs + mov lr, a0 + ldw a0, (sp, 0) + ldw a1, (sp, 4) + ldw a2, (sp, 8) + ldw a3, (sp, 12) + addi sp, 16 +.endm + +.macro nop32_stub + nop32 + nop32 + nop32 +.endm + +ENTRY(ftrace_stub) + jmp lr +END(ftrace_stub) + +#ifndef CONFIG_DYNAMIC_FTRACE +ENTRY(_mcount) + mcount_enter + + /* r26 is link register, only used with jsri translation */ + lrw r26, ftrace_trace_function + ldw r26, (r26, 0) + lrw a1, ftrace_stub + cmpne r26, a1 + bf skip_ftrace + + mov a0, lr + subi a0, 4 + ldw a1, (sp, 24) + lrw a2, function_trace_op + ldw a2, (a2, 0) + + jsr r26 + +#ifndef CONFIG_FUNCTION_GRAPH_TRACER +skip_ftrace: + mcount_exit +#else +skip_ftrace: + lrw a0, ftrace_graph_return + ldw a0, (a0, 0) + lrw a1, ftrace_stub + cmpne a0, a1 + bt ftrace_graph_caller + + lrw a0, ftrace_graph_entry + ldw a0, (a0, 0) + lrw a1, ftrace_graph_entry_stub + cmpne a0, a1 + bt ftrace_graph_caller + + mcount_exit +#endif +END(_mcount) +#else /* CONFIG_DYNAMIC_FTRACE */ +ENTRY(_mcount) + mov t1, lr + ldw lr, (sp, 0) + addi sp, 4 + jmp t1 +ENDPROC(_mcount) + +ENTRY(ftrace_caller) + mcount_enter + + ldw a0, (sp, 16) + subi a0, 4 + ldw a1, (sp, 24) + lrw a2, function_trace_op + ldw a2, (a2, 0) + + nop +GLOBAL(ftrace_call) + nop32_stub + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + nop +GLOBAL(ftrace_graph_call) + nop32_stub +#endif + + mcount_exit +ENDPROC(ftrace_caller) +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +ENTRY(ftrace_graph_caller) + mov a0, sp + addi a0, 24 + ldw a1, (sp, 16) + subi a1, 4 + mov a2, r8 + lrw r26, prepare_ftrace_return + jsr r26 + mcount_exit +END(ftrace_graph_caller) + +ENTRY(return_to_handler) + save_return_regs + mov a0, r8 + jsri ftrace_return_to_handler + restore_return_regs + jmp lr +END(return_to_handler) +#endif + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +ENTRY(ftrace_regs_caller) + mcount_enter_regs + + lrw t1, PT_FRAME_SIZE + add t1, sp + + ldw a0, (t1, 0) + subi a0, 4 + ldw a1, (t1, 8) + lrw a2, function_trace_op + ldw a2, (a2, 0) + mov a3, sp + + nop +GLOBAL(ftrace_regs_call) + nop32_stub + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + nop +GLOBAL(ftrace_graph_regs_call) + nop32_stub +#endif + + mcount_exit_regs +ENDPROC(ftrace_regs_caller) +#endif /* CONFIG_DYNAMIC_FTRACE */ -- cgit v1.2.3