From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/ia64/kernel/signal.c | 412 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 412 insertions(+) create mode 100644 arch/ia64/kernel/signal.c (limited to 'arch/ia64/kernel/signal.c') diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c new file mode 100644 index 000000000..51cf6a7ec --- /dev/null +++ b/arch/ia64/kernel/signal.c @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Architecture-specific signal handling support. + * + * Copyright (C) 1999-2004 Hewlett-Packard Co + * David Mosberger-Tang + * + * Derived from i386 and Alpha versions. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "sigframe.h" + +#define DEBUG_SIG 0 +#define STACK_ALIGN 16 /* minimal alignment for stack pointer */ + +#if _NSIG_WORDS > 1 +# define PUT_SIGSET(k,u) __copy_to_user((u)->sig, (k)->sig, sizeof(sigset_t)) +# define GET_SIGSET(k,u) __copy_from_user((k)->sig, (u)->sig, sizeof(sigset_t)) +#else +# define PUT_SIGSET(k,u) __put_user((k)->sig[0], &(u)->sig[0]) +# define GET_SIGSET(k,u) __get_user((k)->sig[0], &(u)->sig[0]) +#endif + +static long +restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) +{ + unsigned long ip, flags, nat, um, cfm, rsc; + long err; + + /* Always make any pending restarted system calls return -EINTR */ + current->restart_block.fn = do_no_restart_syscall; + + /* restore scratch that always needs gets updated during signal delivery: */ + err = __get_user(flags, &sc->sc_flags); + err |= __get_user(nat, &sc->sc_nat); + err |= __get_user(ip, &sc->sc_ip); /* instruction pointer */ + err |= __get_user(cfm, &sc->sc_cfm); + err |= __get_user(um, &sc->sc_um); /* user mask */ + err |= __get_user(rsc, &sc->sc_ar_rsc); + err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat); + err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr); + err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs); + err |= __get_user(scr->pt.pr, &sc->sc_pr); /* predicates */ + err |= __get_user(scr->pt.b0, &sc->sc_br[0]); /* b0 (rp) */ + err |= __get_user(scr->pt.b6, &sc->sc_br[6]); /* b6 */ + err |= __copy_from_user(&scr->pt.r1, &sc->sc_gr[1], 8); /* r1 */ + err |= __copy_from_user(&scr->pt.r8, &sc->sc_gr[8], 4*8); /* r8-r11 */ + err |= __copy_from_user(&scr->pt.r12, &sc->sc_gr[12], 2*8); /* r12-r13 */ + err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8); /* r15 */ + + scr->pt.cr_ifs = cfm | (1UL << 63); + scr->pt.ar_rsc = rsc | (3 << 2); /* force PL3 */ + + /* establish new instruction pointer: */ + scr->pt.cr_iip = ip & ~0x3UL; + ia64_psr(&scr->pt)->ri = ip & 0x3; + scr->pt.cr_ipsr = (scr->pt.cr_ipsr & ~IA64_PSR_UM) | (um & IA64_PSR_UM); + + scr->scratch_unat = ia64_put_scratch_nat_bits(&scr->pt, nat); + + if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) { + /* Restore most scratch-state only when not in syscall. */ + err |= __get_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */ + err |= __get_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */ + err |= __get_user(scr->pt.r14, &sc->sc_gr[14]); /* r14 */ + err |= __copy_from_user(&scr->pt.ar_csd, &sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */ + err |= __copy_from_user(&scr->pt.r2, &sc->sc_gr[2], 2*8); /* r2-r3 */ + err |= __copy_from_user(&scr->pt.r16, &sc->sc_gr[16], 16*8); /* r16-r31 */ + } + + if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) { + struct ia64_psr *psr = ia64_psr(&scr->pt); + + err |= __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16); + psr->mfh = 0; /* drop signal handler's fph contents... */ + preempt_disable(); + if (psr->dfh) + ia64_drop_fpu(current); + else { + /* We already own the local fph, otherwise psr->dfh wouldn't be 0. */ + __ia64_load_fpu(current->thread.fph); + ia64_set_local_fpu_owner(current); + } + preempt_enable(); + } + return err; +} + +long +ia64_rt_sigreturn (struct sigscratch *scr) +{ + extern char ia64_strace_leave_kernel, ia64_leave_kernel; + struct sigcontext __user *sc; + sigset_t set; + long retval; + + sc = &((struct sigframe __user *) (scr->pt.r12 + 16))->sc; + + /* + * When we return to the previously executing context, r8 and r10 have already + * been setup the way we want them. Indeed, if the signal wasn't delivered while + * in a system call, we must not touch r8 or r10 as otherwise user-level state + * could be corrupted. + */ + retval = (long) &ia64_leave_kernel; + if (test_thread_flag(TIF_SYSCALL_TRACE) + || test_thread_flag(TIF_SYSCALL_AUDIT)) + /* + * strace expects to be notified after sigreturn returns even though the + * context to which we return may not be in the middle of a syscall. + * Thus, the return-value that strace displays for sigreturn is + * meaningless. + */ + retval = (long) &ia64_strace_leave_kernel; + + if (!access_ok(sc, sizeof(*sc))) + goto give_sigsegv; + + if (GET_SIGSET(&set, &sc->sc_mask)) + goto give_sigsegv; + + set_current_blocked(&set); + + if (restore_sigcontext(sc, scr)) + goto give_sigsegv; + +#if DEBUG_SIG + printk("SIG return (%s:%d): sp=%lx ip=%lx\n", + current->comm, current->pid, scr->pt.r12, scr->pt.cr_iip); +#endif + if (restore_altstack(&sc->sc_stack)) + goto give_sigsegv; + return retval; + + give_sigsegv: + force_sig(SIGSEGV); + return retval; +} + +/* + * This does just the minimum required setup of sigcontext. + * Specifically, it only installs data that is either not knowable at + * the user-level or that gets modified before execution in the + * trampoline starts. Everything else is done at the user-level. + */ +static long +setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr) +{ + unsigned long flags = 0, ifs, cfm, nat; + long err = 0; + + ifs = scr->pt.cr_ifs; + + if (on_sig_stack((unsigned long) sc)) + flags |= IA64_SC_FLAG_ONSTACK; + if ((ifs & (1UL << 63)) == 0) + /* if cr_ifs doesn't have the valid bit set, we got here through a syscall */ + flags |= IA64_SC_FLAG_IN_SYSCALL; + cfm = ifs & ((1UL << 38) - 1); + ia64_flush_fph(current); + if ((current->thread.flags & IA64_THREAD_FPH_VALID)) { + flags |= IA64_SC_FLAG_FPH_VALID; + err = __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16); + } + + nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat); + + err |= __put_user(flags, &sc->sc_flags); + err |= __put_user(nat, &sc->sc_nat); + err |= PUT_SIGSET(mask, &sc->sc_mask); + err |= __put_user(cfm, &sc->sc_cfm); + err |= __put_user(scr->pt.cr_ipsr & IA64_PSR_UM, &sc->sc_um); + err |= __put_user(scr->pt.ar_rsc, &sc->sc_ar_rsc); + err |= __put_user(scr->pt.ar_unat, &sc->sc_ar_unat); /* ar.unat */ + err |= __put_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr); /* ar.fpsr */ + err |= __put_user(scr->pt.ar_pfs, &sc->sc_ar_pfs); + err |= __put_user(scr->pt.pr, &sc->sc_pr); /* predicates */ + err |= __put_user(scr->pt.b0, &sc->sc_br[0]); /* b0 (rp) */ + err |= __put_user(scr->pt.b6, &sc->sc_br[6]); /* b6 */ + err |= __copy_to_user(&sc->sc_gr[1], &scr->pt.r1, 8); /* r1 */ + err |= __copy_to_user(&sc->sc_gr[8], &scr->pt.r8, 4*8); /* r8-r11 */ + err |= __copy_to_user(&sc->sc_gr[12], &scr->pt.r12, 2*8); /* r12-r13 */ + err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8); /* r15 */ + err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip); + + if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) { + /* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */ + err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */ + err |= __put_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */ + err |= __put_user(scr->pt.r14, &sc->sc_gr[14]); /* r14 */ + err |= __copy_to_user(&sc->sc_ar25, &scr->pt.ar_csd, 2*8); /* ar.csd & ar.ssd */ + err |= __copy_to_user(&sc->sc_gr[2], &scr->pt.r2, 2*8); /* r2-r3 */ + err |= __copy_to_user(&sc->sc_gr[16], &scr->pt.r16, 16*8); /* r16-r31 */ + } + return err; +} + +/* + * Check whether the register-backing store is already on the signal stack. + */ +static inline int +rbs_on_sig_stack (unsigned long bsp) +{ + return (bsp - current->sas_ss_sp < current->sas_ss_size); +} + +static long +setup_frame(struct ksignal *ksig, sigset_t *set, struct sigscratch *scr) +{ + extern char __kernel_sigtramp[]; + unsigned long tramp_addr, new_rbs = 0, new_sp; + struct sigframe __user *frame; + long err; + + new_sp = scr->pt.r12; + tramp_addr = (unsigned long) __kernel_sigtramp; + if (ksig->ka.sa.sa_flags & SA_ONSTACK) { + int onstack = sas_ss_flags(new_sp); + + if (onstack == 0) { + new_sp = current->sas_ss_sp + current->sas_ss_size; + /* + * We need to check for the register stack being on the + * signal stack separately, because it's switched + * separately (memory stack is switched in the kernel, + * register stack is switched in the signal trampoline). + */ + if (!rbs_on_sig_stack(scr->pt.ar_bspstore)) + new_rbs = ALIGN(current->sas_ss_sp, + sizeof(long)); + } else if (onstack == SS_ONSTACK) { + unsigned long check_sp; + + /* + * If we are on the alternate signal stack and would + * overflow it, don't. Return an always-bogus address + * instead so we will die with SIGSEGV. + */ + check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN; + if (!likely(on_sig_stack(check_sp))) { + force_sigsegv(ksig->sig); + return 1; + } + } + } + frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN); + + if (!access_ok(frame, sizeof(*frame))) { + force_sigsegv(ksig->sig); + return 1; + } + + err = __put_user(ksig->sig, &frame->arg0); + err |= __put_user(&frame->info, &frame->arg1); + err |= __put_user(&frame->sc, &frame->arg2); + err |= __put_user(new_rbs, &frame->sc.sc_rbs_base); + err |= __put_user(0, &frame->sc.sc_loadrs); /* initialize to zero */ + err |= __put_user(ksig->ka.sa.sa_handler, &frame->handler); + + err |= copy_siginfo_to_user(&frame->info, &ksig->info); + + err |= __save_altstack(&frame->sc.sc_stack, scr->pt.r12); + err |= setup_sigcontext(&frame->sc, set, scr); + + if (unlikely(err)) { + force_sigsegv(ksig->sig); + return 1; + } + + scr->pt.r12 = (unsigned long) frame - 16; /* new stack pointer */ + scr->pt.ar_fpsr = FPSR_DEFAULT; /* reset fpsr for signal handler */ + scr->pt.cr_iip = tramp_addr; + ia64_psr(&scr->pt)->ri = 0; /* start executing in first slot */ + ia64_psr(&scr->pt)->be = 0; /* force little-endian byte-order */ + /* + * Force the interruption function mask to zero. This has no effect when a + * system-call got interrupted by a signal (since, in that case, scr->pt_cr_ifs is + * ignored), but it has the desirable effect of making it possible to deliver a + * signal with an incomplete register frame (which happens when a mandatory RSE + * load faults). Furthermore, it has no negative effect on the getting the user's + * dirty partition preserved, because that's governed by scr->pt.loadrs. + */ + scr->pt.cr_ifs = (1UL << 63); + + /* + * Note: this affects only the NaT bits of the scratch regs (the ones saved in + * pt_regs), which is exactly what we want. + */ + scr->scratch_unat = 0; /* ensure NaT bits of r12 is clear */ + +#if DEBUG_SIG + printk("SIG deliver (%s:%d): sig=%d sp=%lx ip=%lx handler=%p\n", + current->comm, current->pid, ksig->sig, scr->pt.r12, frame->sc.sc_ip, frame->handler); +#endif + return 0; +} + +static long +handle_signal (struct ksignal *ksig, struct sigscratch *scr) +{ + int ret = setup_frame(ksig, sigmask_to_save(), scr); + + if (!ret) + signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); + + return ret; +} + +/* + * Note that `init' is a special process: it doesn't get signals it doesn't want to + * handle. Thus you cannot kill init even with a SIGKILL even by mistake. + */ +void +ia64_do_signal (struct sigscratch *scr, long in_syscall) +{ + long restart = in_syscall; + long errno = scr->pt.r8; + struct ksignal ksig; + + /* + * This only loops in the rare cases of handle_signal() failing, in which case we + * need to push through a forced SIGSEGV. + */ + while (1) { + if (!get_signal(&ksig)) + break; + + /* + * get_signal() may have run a debugger (via notify_parent()) + * and the debugger may have modified the state (e.g., to arrange for an + * inferior call), thus it's important to check for restarting _after_ + * get_signal(). + */ + if ((long) scr->pt.r10 != -1) + /* + * A system calls has to be restarted only if one of the error codes + * ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned. If r10 + * isn't -1 then r8 doesn't hold an error code and we don't need to + * restart the syscall, so we can clear the "restart" flag here. + */ + restart = 0; + + if (ksig.sig <= 0) + break; + + if (unlikely(restart)) { + switch (errno) { + case ERESTART_RESTARTBLOCK: + case ERESTARTNOHAND: + scr->pt.r8 = EINTR; + /* note: scr->pt.r10 is already -1 */ + break; + case ERESTARTSYS: + if ((ksig.ka.sa.sa_flags & SA_RESTART) == 0) { + scr->pt.r8 = EINTR; + /* note: scr->pt.r10 is already -1 */ + break; + } + fallthrough; + case ERESTARTNOINTR: + ia64_decrement_ip(&scr->pt); + restart = 0; /* don't restart twice if handle_signal() fails... */ + } + } + + /* + * Whee! Actually deliver the signal. If the delivery failed, we need to + * continue to iterate in this loop so we can deliver the SIGSEGV... + */ + if (handle_signal(&ksig, scr)) + return; + } + + /* Did we come from a system call? */ + if (restart) { + /* Restart the system call - no handlers present */ + if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR + || errno == ERESTART_RESTARTBLOCK) + { + /* + * Note: the syscall number is in r15 which is saved in + * pt_regs so all we need to do here is adjust ip so that + * the "break" instruction gets re-executed. + */ + ia64_decrement_ip(&scr->pt); + if (errno == ERESTART_RESTARTBLOCK) + scr->pt.r15 = __NR_restart_syscall; + } + } + + /* if there's no signal to deliver, we just put the saved sigmask + * back */ + restore_saved_sigmask(); +} -- cgit v1.2.3