From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/loongarch/kernel/mcount_dyn.S | 149 +++++++++++++++++++++++++++++++++++++ 1 file changed, 149 insertions(+) create mode 100644 arch/loongarch/kernel/mcount_dyn.S (limited to 'arch/loongarch/kernel/mcount_dyn.S') diff --git a/arch/loongarch/kernel/mcount_dyn.S b/arch/loongarch/kernel/mcount_dyn.S new file mode 100644 index 000000000..bbabf0624 --- /dev/null +++ b/arch/loongarch/kernel/mcount_dyn.S @@ -0,0 +1,149 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 Loongson Technology Corporation Limited + */ + +#include +#include +#include +#include + + .text +/* + * Due to -fpatchable-function-entry=2: the compiler inserted 2 NOPs before the + * regular C function prologue. When PC arrived here, the last 2 instructions + * are as follows: + * move t0, ra + * bl callsite (for modules, callsite is a tramplione) + * + * modules trampoline is as follows: + * lu12i.w t1, callsite[31:12] + * lu32i.d t1, callsite[51:32] + * lu52i.d t1, t1, callsite[63:52] + * jirl zero, t1, callsite[11:0] >> 2 + * + * See arch/loongarch/kernel/ftrace_dyn.c for details. Here, pay attention to + * that the T series regs are available and safe because each C functions + * follows the LoongArch's psABI as well. + */ + + .macro ftrace_regs_entry allregs=0 + PTR_ADDI sp, sp, -PT_SIZE + PTR_S t0, sp, PT_R1 /* Save parent ra at PT_R1(RA) */ + PTR_S a0, sp, PT_R4 + PTR_S a1, sp, PT_R5 + PTR_S a2, sp, PT_R6 + PTR_S a3, sp, PT_R7 + PTR_S a4, sp, PT_R8 + PTR_S a5, sp, PT_R9 + PTR_S a6, sp, PT_R10 + PTR_S a7, sp, PT_R11 + PTR_S fp, sp, PT_R22 + .if \allregs + PTR_S tp, sp, PT_R2 + PTR_S t0, sp, PT_R12 + PTR_S t1, sp, PT_R13 + PTR_S t2, sp, PT_R14 + PTR_S t3, sp, PT_R15 + PTR_S t4, sp, PT_R16 + PTR_S t5, sp, PT_R17 + PTR_S t6, sp, PT_R18 + PTR_S t7, sp, PT_R19 + PTR_S t8, sp, PT_R20 + PTR_S u0, sp, PT_R21 + PTR_S s0, sp, PT_R23 + PTR_S s1, sp, PT_R24 + PTR_S s2, sp, PT_R25 + PTR_S s3, sp, PT_R26 + PTR_S s4, sp, PT_R27 + PTR_S s5, sp, PT_R28 + PTR_S s6, sp, PT_R29 + PTR_S s7, sp, PT_R30 + PTR_S s8, sp, PT_R31 + /* Clear it for later use as a flag sometimes. */ + PTR_S zero, sp, PT_R0 + .endif + PTR_S ra, sp, PT_ERA /* Save trace function ra at PT_ERA */ + PTR_ADDI t8, sp, PT_SIZE + PTR_S t8, sp, PT_R3 + .endm + +SYM_FUNC_START(ftrace_stub) + jr ra +SYM_FUNC_END(ftrace_stub) + +SYM_CODE_START(ftrace_common) + PTR_ADDI a0, ra, -8 /* arg0: ip */ + move a1, t0 /* arg1: parent_ip */ + la.pcrel t1, function_trace_op + PTR_L a2, t1, 0 /* arg2: op */ + move a3, sp /* arg3: regs */ + +SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL) + bl ftrace_stub +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL) + nop /* b ftrace_graph_caller */ +#endif + +/* + * As we didn't use S series regs in this assmembly code and all calls + * are C function which will save S series regs by themselves, there is + * no need to restore S series regs. The T series is available and safe + * at the callsite, so there is no need to restore the T series regs. + */ +ftrace_common_return: + PTR_L ra, sp, PT_R1 + PTR_L a0, sp, PT_R4 + PTR_L a1, sp, PT_R5 + PTR_L a2, sp, PT_R6 + PTR_L a3, sp, PT_R7 + PTR_L a4, sp, PT_R8 + PTR_L a5, sp, PT_R9 + PTR_L a6, sp, PT_R10 + PTR_L a7, sp, PT_R11 + PTR_L fp, sp, PT_R22 + PTR_L t0, sp, PT_ERA + PTR_ADDI sp, sp, PT_SIZE + jr t0 +SYM_CODE_END(ftrace_common) + +SYM_CODE_START(ftrace_caller) + ftrace_regs_entry allregs=0 + b ftrace_common +SYM_CODE_END(ftrace_caller) + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +SYM_CODE_START(ftrace_regs_caller) + ftrace_regs_entry allregs=1 + b ftrace_common +SYM_CODE_END(ftrace_regs_caller) +#endif + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +SYM_CODE_START(ftrace_graph_caller) + PTR_L a0, sp, PT_ERA + PTR_ADDI a0, a0, -8 /* arg0: self_addr */ + PTR_ADDI a1, sp, PT_R1 /* arg1: parent */ + bl prepare_ftrace_return + b ftrace_common_return +SYM_CODE_END(ftrace_graph_caller) + +SYM_CODE_START(return_to_handler) + /* Save return value regs */ + PTR_ADDI sp, sp, -2 * SZREG + PTR_S a0, sp, 0 + PTR_S a1, sp, SZREG + + move a0, zero + bl ftrace_return_to_handler + move ra, a0 + + /* Restore return value regs */ + PTR_L a0, sp, 0 + PTR_L a1, sp, SZREG + PTR_ADDI sp, sp, 2 * SZREG + + jr ra +SYM_CODE_END(return_to_handler) +#endif -- cgit v1.2.3