From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/loongarch/pci/acpi.c | 246 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 246 insertions(+) create mode 100644 arch/loongarch/pci/acpi.c (limited to 'arch/loongarch/pci/acpi.c') diff --git a/arch/loongarch/pci/acpi.c b/arch/loongarch/pci/acpi.c new file mode 100644 index 000000000..365f7de77 --- /dev/null +++ b/arch/loongarch/pci/acpi.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020-2022 Loongson Technology Corporation Limited + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +struct pci_root_info { + struct acpi_pci_root_info common; + struct pci_config_window *cfg; +}; + +void pcibios_add_bus(struct pci_bus *bus) +{ + acpi_pci_add_bus(bus); +} + +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) +{ + struct acpi_device *adev = NULL; + struct device *bus_dev = &bridge->bus->dev; + struct pci_config_window *cfg = bridge->bus->sysdata; + + if (!acpi_disabled) + adev = to_acpi_device(cfg->parent); + + ACPI_COMPANION_SET(&bridge->dev, adev); + set_dev_node(bus_dev, pa_to_nid(cfg->res.start)); + + return 0; +} + +int acpi_pci_bus_find_domain_nr(struct pci_bus *bus) +{ + struct pci_config_window *cfg = bus->sysdata; + struct acpi_device *adev = to_acpi_device(cfg->parent); + struct acpi_pci_root *root = acpi_driver_data(adev); + + return root->segment; +} + +static void acpi_release_root_info(struct acpi_pci_root_info *ci) +{ + struct pci_root_info *info; + + info = container_of(ci, struct pci_root_info, common); + pci_ecam_free(info->cfg); + kfree(ci->ops); + kfree(info); +} + +static int acpi_prepare_root_resources(struct acpi_pci_root_info *ci) +{ + int status; + struct resource_entry *entry, *tmp; + struct acpi_device *device = ci->bridge; + + status = acpi_pci_probe_root_resources(ci); + if (status > 0) { + resource_list_for_each_entry_safe(entry, tmp, &ci->resources) { + if (entry->res->flags & IORESOURCE_MEM) { + entry->offset = ci->root->mcfg_addr & GENMASK_ULL(63, 40); + entry->res->start |= entry->offset; + entry->res->end |= entry->offset; + } + } + return status; + } + + resource_list_for_each_entry_safe(entry, tmp, &ci->resources) { + dev_dbg(&device->dev, + "host bridge window %pR (ignored)\n", entry->res); + resource_list_destroy_entry(entry); + } + + return 0; +} + +/* + * Create a PCI config space window + * - reserve mem region + * - alloc struct pci_config_window with space for all mappings + * - ioremap the config space + */ +static struct pci_config_window *arch_pci_ecam_create(struct device *dev, + struct resource *cfgres, struct resource *busr, const struct pci_ecam_ops *ops) +{ + int bsz, bus_range, err; + struct resource *conflict; + struct pci_config_window *cfg; + + if (busr->start > busr->end) + return ERR_PTR(-EINVAL); + + cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return ERR_PTR(-ENOMEM); + + cfg->parent = dev; + cfg->ops = ops; + cfg->busr.start = busr->start; + cfg->busr.end = busr->end; + cfg->busr.flags = IORESOURCE_BUS; + bus_range = resource_size(cfgres) >> ops->bus_shift; + + bsz = 1 << ops->bus_shift; + + cfg->res.start = cfgres->start; + cfg->res.end = cfgres->end; + cfg->res.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + cfg->res.name = "PCI ECAM"; + + conflict = request_resource_conflict(&iomem_resource, &cfg->res); + if (conflict) { + err = -EBUSY; + dev_err(dev, "can't claim ECAM area %pR: address conflict with %s %pR\n", + &cfg->res, conflict->name, conflict); + goto err_exit; + } + + cfg->win = pci_remap_cfgspace(cfgres->start, bus_range * bsz); + if (!cfg->win) + goto err_exit_iomap; + + if (ops->init) { + err = ops->init(cfg); + if (err) + goto err_exit; + } + dev_info(dev, "ECAM at %pR for %pR\n", &cfg->res, &cfg->busr); + + return cfg; + +err_exit_iomap: + err = -ENOMEM; + dev_err(dev, "ECAM ioremap failed\n"); +err_exit: + pci_ecam_free(cfg); + return ERR_PTR(err); +} + +/* + * Lookup the bus range for the domain in MCFG, and set up config space + * mapping. + */ +static struct pci_config_window * +pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root) +{ + int ret, bus_shift; + u16 seg = root->segment; + struct device *dev = &root->device->dev; + struct resource cfgres; + struct resource *bus_res = &root->secondary; + struct pci_config_window *cfg; + const struct pci_ecam_ops *ecam_ops; + + ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops); + if (ret < 0) { + dev_err(dev, "%04x:%pR ECAM region not found, use default value\n", seg, bus_res); + ecam_ops = &loongson_pci_ecam_ops; + root->mcfg_addr = mcfg_addr_init(0); + } + + bus_shift = ecam_ops->bus_shift ? : 20; + + if (bus_shift == 20) + cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops); + else { + cfgres.start = root->mcfg_addr + (bus_res->start << bus_shift); + cfgres.end = cfgres.start + (resource_size(bus_res) << bus_shift) - 1; + cfgres.end |= BIT(28) + (((PCI_CFG_SPACE_EXP_SIZE - 1) & 0xf00) << 16); + cfgres.flags = IORESOURCE_MEM; + cfg = arch_pci_ecam_create(dev, &cfgres, bus_res, ecam_ops); + } + + if (IS_ERR(cfg)) { + dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res, PTR_ERR(cfg)); + return NULL; + } + + return cfg; +} + +struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) +{ + struct pci_bus *bus; + struct pci_root_info *info; + struct acpi_pci_root_ops *root_ops; + int domain = root->segment; + int busnum = root->secondary.start; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + pr_warn("pci_bus %04x:%02x: ignored (out of memory)\n", domain, busnum); + return NULL; + } + + root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL); + if (!root_ops) { + kfree(info); + return NULL; + } + + info->cfg = pci_acpi_setup_ecam_mapping(root); + if (!info->cfg) { + kfree(info); + kfree(root_ops); + return NULL; + } + + root_ops->release_info = acpi_release_root_info; + root_ops->prepare_resources = acpi_prepare_root_resources; + root_ops->pci_ops = (struct pci_ops *)&info->cfg->ops->pci_ops; + + bus = pci_find_bus(domain, busnum); + if (bus) { + memcpy(bus->sysdata, info->cfg, sizeof(struct pci_config_window)); + kfree(info); + } else { + struct pci_bus *child; + + bus = acpi_pci_root_create(root, root_ops, + &info->common, info->cfg); + if (!bus) { + kfree(info); + kfree(root_ops); + return NULL; + } + + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } + + return bus; +} -- cgit v1.2.3