From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/m68k/68000/ints.c | 186 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 arch/m68k/68000/ints.c (limited to 'arch/m68k/68000/ints.c') diff --git a/arch/m68k/68000/ints.c b/arch/m68k/68000/ints.c new file mode 100644 index 000000000..f9a5ec781 --- /dev/null +++ b/arch/m68k/68000/ints.c @@ -0,0 +1,186 @@ +/* + * ints.c - Generic interrupt controller support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_M68EZ328) +#include +#elif defined(CONFIG_M68VZ328) +#include +#else +#include +#endif + +/* assembler routines */ +asmlinkage void system_call(void); +asmlinkage void buserr(void); +asmlinkage void trap(void); +asmlinkage void trap3(void); +asmlinkage void trap4(void); +asmlinkage void trap5(void); +asmlinkage void trap6(void); +asmlinkage void trap7(void); +asmlinkage void trap8(void); +asmlinkage void trap9(void); +asmlinkage void trap10(void); +asmlinkage void trap11(void); +asmlinkage void trap12(void); +asmlinkage void trap13(void); +asmlinkage void trap14(void); +asmlinkage void trap15(void); +asmlinkage void trap33(void); +asmlinkage void trap34(void); +asmlinkage void trap35(void); +asmlinkage void trap36(void); +asmlinkage void trap37(void); +asmlinkage void trap38(void); +asmlinkage void trap39(void); +asmlinkage void trap40(void); +asmlinkage void trap41(void); +asmlinkage void trap42(void); +asmlinkage void trap43(void); +asmlinkage void trap44(void); +asmlinkage void trap45(void); +asmlinkage void trap46(void); +asmlinkage void trap47(void); +asmlinkage irqreturn_t bad_interrupt(int, void *); +asmlinkage irqreturn_t inthandler(void); +asmlinkage irqreturn_t inthandler1(void); +asmlinkage irqreturn_t inthandler2(void); +asmlinkage irqreturn_t inthandler3(void); +asmlinkage irqreturn_t inthandler4(void); +asmlinkage irqreturn_t inthandler5(void); +asmlinkage irqreturn_t inthandler6(void); +asmlinkage irqreturn_t inthandler7(void); + +/* The 68k family did not have a good way to determine the source + * of interrupts until later in the family. The EC000 core does + * not provide the vector number on the stack, we vector everything + * into one vector and look in the blasted mask register... + * This code is designed to be fast, almost constant time, not clean! + */ +void process_int(int vec, struct pt_regs *fp) +{ + int irq; + int mask; + + unsigned long pend = ISR; + + while (pend) { + if (pend & 0x0000ffff) { + if (pend & 0x000000ff) { + if (pend & 0x0000000f) { + mask = 0x00000001; + irq = 0; + } else { + mask = 0x00000010; + irq = 4; + } + } else { + if (pend & 0x00000f00) { + mask = 0x00000100; + irq = 8; + } else { + mask = 0x00001000; + irq = 12; + } + } + } else { + if (pend & 0x00ff0000) { + if (pend & 0x000f0000) { + mask = 0x00010000; + irq = 16; + } else { + mask = 0x00100000; + irq = 20; + } + } else { + if (pend & 0x0f000000) { + mask = 0x01000000; + irq = 24; + } else { + mask = 0x10000000; + irq = 28; + } + } + } + + while (! (mask & pend)) { + mask <<=1; + irq++; + } + + do_IRQ(irq, fp); + pend &= ~mask; + } +} + +static void intc_irq_unmask(struct irq_data *d) +{ + IMR &= ~(1 << d->irq); +} + +static void intc_irq_mask(struct irq_data *d) +{ + IMR |= (1 << d->irq); +} + +static struct irq_chip intc_irq_chip = { + .name = "M68K-INTC", + .irq_mask = intc_irq_mask, + .irq_unmask = intc_irq_unmask, +}; + +/* + * This function should be called during kernel startup to initialize + * the machine vector table. + */ +void __init trap_init(void) +{ + int i; + + /* set up the vectors */ + for (i = 72; i < 256; ++i) + _ramvec[i] = (e_vector) bad_interrupt; + + _ramvec[32] = system_call; + + _ramvec[65] = (e_vector) inthandler1; + _ramvec[66] = (e_vector) inthandler2; + _ramvec[67] = (e_vector) inthandler3; + _ramvec[68] = (e_vector) inthandler4; + _ramvec[69] = (e_vector) inthandler5; + _ramvec[70] = (e_vector) inthandler6; + _ramvec[71] = (e_vector) inthandler7; +} + +void __init init_IRQ(void) +{ + int i; + + IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */ + + /* turn off all interrupts */ + IMR = ~0; + + for (i = 0; (i < NR_IRQS); i++) { + irq_set_chip(i, &intc_irq_chip); + irq_set_handler(i, handle_level_irq); + } +} + -- cgit v1.2.3