From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/m68k/kernel/setup_no.c | 221 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 221 insertions(+) create mode 100644 arch/m68k/kernel/setup_no.c (limited to 'arch/m68k/kernel/setup_no.c') diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c new file mode 100644 index 000000000..37fb66355 --- /dev/null +++ b/arch/m68k/kernel/setup_no.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/m68knommu/kernel/setup.c + * + * Copyright (C) 1999-2007 Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1998,1999 D. Jeff Dionne + * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com} + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1995 Hamish Macdonald + * Copyright (C) 2000 Lineo Inc. (www.lineo.com) + * Copyright (C) 2001 Lineo, Inc. + * + * 68VZ328 Fixes/support Evan Stawnyczy + */ + +/* + * This file handles the architecture-dependent parts of system setup + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +unsigned long memory_start; +unsigned long memory_end; + +EXPORT_SYMBOL(memory_start); +EXPORT_SYMBOL(memory_end); + +char __initdata command_line[COMMAND_LINE_SIZE]; + +/* machine dependent timer functions */ +void (*mach_sched_init)(void) __initdata = NULL; + +/* machine dependent reboot functions */ +void (*mach_reset)(void); +void (*mach_halt)(void); + +#ifdef CONFIG_M68000 +#if defined(CONFIG_M68328) +#define CPU_NAME "MC68328" +#elif defined(CONFIG_M68EZ328) +#define CPU_NAME "MC68EZ328" +#elif defined(CONFIG_M68VZ328) +#define CPU_NAME "MC68VZ328" +#else +#define CPU_NAME "MC68000" +#endif +#endif /* CONFIG_M68000 */ +#ifndef CPU_NAME +#define CPU_NAME "UNKNOWN" +#endif + +/* + * Different cores have different instruction execution timings. + * The old/traditional 68000 cores are basically all the same, at 16. + * The ColdFire cores vary a little, their values are defined in their + * headers. We default to the standard 68000 value here. + */ +#ifndef CPU_INSTR_PER_JIFFY +#define CPU_INSTR_PER_JIFFY 16 +#endif + +void __init setup_arch(char **cmdline_p) +{ + memory_start = PAGE_ALIGN(_ramstart); + memory_end = _ramend; + + setup_initial_init_mm(_stext, _etext, _edata, NULL); + + config_BSP(&command_line[0], sizeof(command_line)); + +#if defined(CONFIG_BOOTPARAM) + strscpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line)); +#endif /* CONFIG_BOOTPARAM */ + + process_uboot_commandline(&command_line[0], sizeof(command_line)); + + pr_info("uClinux with CPU " CPU_NAME "\n"); + +#ifdef CONFIG_UCDIMM + pr_info("uCdimm by Lineo, Inc. \n"); +#endif +#ifdef CONFIG_M68328 + pr_info("68328 support D. Jeff Dionne \n"); + pr_info("68328 support Kenneth Albanowski \n"); +#endif +#ifdef CONFIG_M68EZ328 + pr_info("68EZ328 DragonBallEZ support (C) 1999 Rt-Control, Inc\n"); +#endif +#ifdef CONFIG_M68VZ328 + pr_info("M68VZ328 support by Evan Stawnyczy \n"); + pr_info("68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n"); +#endif +#ifdef CONFIG_COLDFIRE + pr_info("COLDFIRE port done by Greg Ungerer, gerg@snapgear.com\n"); +#ifdef CONFIG_M5307 + pr_info("Modified for M5307 by Dave Miller, dmiller@intellistor.com\n"); +#endif +#ifdef CONFIG_ELITE + pr_info("Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n"); +#endif +#endif + pr_info("Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n"); + +#if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 ) + pr_info("68328/Pilot support Bernhard Kuhn \n"); + pr_info("TRG SuperPilot FLASH card support \n"); +#endif +#if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 ) + pr_info("PalmV support by Lineo Inc. \n"); +#endif +#ifdef CONFIG_DRAGEN2 + pr_info("DragonEngine II board support by Georges Menie\n"); +#endif +#ifdef CONFIG_M5235EVB + pr_info("Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n"); +#endif + + pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n", + _stext, _etext, _sdata, _edata, __bss_start, __bss_stop); + pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ", + __bss_stop, memory_start, memory_start, memory_end); + + memblock_add(_rambase, memory_end - _rambase); + memblock_reserve(_rambase, memory_start - _rambase); + + /* Keep a copy of command line */ + *cmdline_p = &command_line[0]; + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE-1] = 0; + + /* + * Give all the memory to the bootmap allocator, tell it to put the + * boot mem_map at the start of memory. + */ + min_low_pfn = PFN_DOWN(memory_start); + max_pfn = max_low_pfn = PFN_DOWN(memory_end); + +#if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD) + if ((initrd_start > 0) && (initrd_start < initrd_end) && + (initrd_end < memory_end)) + memblock_reserve(initrd_start, initrd_end - initrd_start); +#endif /* if defined(CONFIG_BLK_DEV_INITRD) */ + + /* + * Get kmalloc into gear. + */ + paging_init(); +} + +/* + * Get CPU information for use by the procfs. + */ +static int show_cpuinfo(struct seq_file *m, void *v) +{ + char *cpu, *mmu, *fpu; + u_long clockfreq; + + cpu = CPU_NAME; + mmu = "none"; + fpu = "none"; + clockfreq = (loops_per_jiffy * HZ) * CPU_INSTR_PER_JIFFY; + + seq_printf(m, "CPU:\t\t%s\n" + "MMU:\t\t%s\n" + "FPU:\t\t%s\n" + "Clocking:\t%lu.%1luMHz\n" + "BogoMips:\t%lu.%02lu\n" + "Calibration:\t%lu loops\n", + cpu, mmu, fpu, + clockfreq / 1000000, + (clockfreq / 100000) % 10, + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100, + (loops_per_jiffy * HZ)); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; + -- cgit v1.2.3