From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/microblaze/kernel/process.c | 143 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 arch/microblaze/kernel/process.c (limited to 'arch/microblaze/kernel/process.c') diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c new file mode 100644 index 000000000..56342e114 --- /dev/null +++ b/arch/microblaze/kernel/process.c @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void show_regs(struct pt_regs *regs) +{ + show_regs_print_info(KERN_INFO); + + pr_info(" Registers dump: mode=%X\r\n", regs->pt_mode); + pr_info(" r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", + regs->r1, regs->r2, regs->r3, regs->r4); + pr_info(" r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", + regs->r5, regs->r6, regs->r7, regs->r8); + pr_info(" r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n", + regs->r9, regs->r10, regs->r11, regs->r12); + pr_info(" r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n", + regs->r13, regs->r14, regs->r15, regs->r16); + pr_info(" r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n", + regs->r17, regs->r18, regs->r19, regs->r20); + pr_info(" r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n", + regs->r21, regs->r22, regs->r23, regs->r24); + pr_info(" r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n", + regs->r25, regs->r26, regs->r27, regs->r28); + pr_info(" r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n", + regs->r29, regs->r30, regs->r31, regs->pc); + pr_info(" msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", + regs->msr, regs->ear, regs->esr, regs->fsr); +} + +void (*pm_power_off)(void) = NULL; +EXPORT_SYMBOL(pm_power_off); + +void flush_thread(void) +{ +} + +int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) +{ + unsigned long clone_flags = args->flags; + unsigned long usp = args->stack; + unsigned long tls = args->tls; + struct pt_regs *childregs = task_pt_regs(p); + struct thread_info *ti = task_thread_info(p); + + if (unlikely(args->fn)) { + /* if we're creating a new kernel thread then just zeroing all + * the registers. That's OK for a brand new thread.*/ + memset(childregs, 0, sizeof(struct pt_regs)); + memset(&ti->cpu_context, 0, sizeof(struct cpu_context)); + ti->cpu_context.r1 = (unsigned long)childregs; + ti->cpu_context.r20 = (unsigned long)args->fn; + ti->cpu_context.r19 = (unsigned long)args->fn_arg; + childregs->pt_mode = 1; + local_save_flags(childregs->msr); + ti->cpu_context.msr = childregs->msr & ~MSR_IE; + ti->cpu_context.r15 = (unsigned long)ret_from_kernel_thread - 8; + return 0; + } + *childregs = *current_pt_regs(); + if (usp) + childregs->r1 = usp; + + memset(&ti->cpu_context, 0, sizeof(struct cpu_context)); + ti->cpu_context.r1 = (unsigned long)childregs; + childregs->msr |= MSR_UMS; + + /* we should consider the fact that childregs is a copy of the parent + * regs which were saved immediately after entering the kernel state + * before enabling VM. This MSR will be restored in switch_to and + * RETURN() and we want to have the right machine state there + * specifically this state must have INTs disabled before and enabled + * after performing rtbd + * compose the right MSR for RETURN(). It will work for switch_to also + * excepting for VM and UMS + * don't touch UMS , CARRY and cache bits + * right now MSR is a copy of parent one */ + childregs->msr &= ~MSR_EIP; + childregs->msr |= MSR_IE; + childregs->msr &= ~MSR_VM; + childregs->msr |= MSR_VMS; + childregs->msr |= MSR_EE; /* exceptions will be enabled*/ + + ti->cpu_context.msr = (childregs->msr|MSR_VM); + ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */ + ti->cpu_context.msr &= ~MSR_IE; + ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8; + + /* + * r21 is the thread reg, r10 is 6th arg to clone + * which contains TLS area + */ + if (clone_flags & CLONE_SETTLS) + childregs->r21 = tls; + + return 0; +} + +unsigned long __get_wchan(struct task_struct *p) +{ +/* TBD (used by procfs) */ + return 0; +} + +/* Set up a thread for executing a new program */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) +{ + regs->pc = pc; + regs->r1 = usp; + regs->pt_mode = 0; + regs->msr |= MSR_UMS; + regs->msr &= ~MSR_VM; +} + +#include +/* + * Set up a thread for executing a new program + */ +int elf_core_copy_task_fpregs(struct task_struct *t, elf_fpregset_t *fpu) +{ + return 0; /* MicroBlaze has no separate FPU registers */ +} + +void arch_cpu_idle(void) +{ +} -- cgit v1.2.3