From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/mips/boot/dts/ingenic/ci20.dts | 598 ++++++++++++++++++++++++++++++++++++ 1 file changed, 598 insertions(+) create mode 100644 arch/mips/boot/dts/ingenic/ci20.dts (limited to 'arch/mips/boot/dts/ingenic/ci20.dts') diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts new file mode 100644 index 000000000..f38c39572 --- /dev/null +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "jz4780.dtsi" +#include +#include +#include +#include +#include + +/ { + compatible = "img,ci20", "ingenic,jz4780"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial3 = &uart3; + serial4 = &uart4; + }; + + chosen { + stdout-path = &uart4; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000 + 0x30000000 0x30000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + switch { + label = "ci20:sw1"; + linux,code = ; + gpios = <&gpd 17 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "ci20:red:led0"; + gpios = <&gpc 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + led1 { + label = "ci20:red:led1"; + gpios = <&gpc 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "nand-disk"; + }; + + led2 { + label = "ci20:red:led2"; + gpios = <&gpc 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu1"; + }; + + led3 { + label = "ci20:red:led3"; + gpios = <&gpc 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + }; + + eth0_power: fixedregulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "eth0_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpb 25 GPIO_ACTIVE_LOW>; + enable-active-high; + }; + + hdmi_out: connector { + compatible = "hdmi-connector"; + label = "HDMI OUT"; + type = "a"; + + ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>; + + port { + hdmi_con: endpoint { + remote-endpoint = <&dw_hdmi_out>; + }; + }; + }; + + ir: ir { + compatible = "gpio-ir-receiver"; + gpios = <&gpe 3 GPIO_ACTIVE_LOW>; + }; + + wlan0_power: fixedregulator@1 { + compatible = "regulator-fixed"; + + regulator-name = "wlan0_power"; + + gpio = <&gpb 19 GPIO_ACTIVE_LOW>; + enable-active-high; + }; + + otg_power: fixedregulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "otg_power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpf 14 GPIO_ACTIVE_LOW>; + enable-active-high; + }; +}; + +&ext { + clock-frequency = <48000000>; +}; + +&cgu { + /* + * Use the 32.768 kHz oscillator as the parent of the RTC for a higher + * precision. + */ + assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>, + <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>, + <&cgu JZ4780_CLK_HDMI>; + assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>, + <&cgu JZ4780_CLK_MPLL>, + <&cgu JZ4780_CLK_SSIPLL>; + assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>; +}; + +&tcu { + /* + * 750 kHz for the system timers and clocksource, + * use channel #0 and #1 for the per cpu system timers, + * and use channel #2 for the clocksource. + * + * 3000 kHz for the OST timer to provide a higher + * precision clocksource. + */ + assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_OST>; + assigned-clock-rates = <750000>, <750000>, <750000>, <3000000>; +}; + +&mmc0 { + status = "okay"; + + bus-width = <4>; + max-frequency = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mmc0>; + + cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>; +}; + +&mmc1 { + status = "okay"; + + bus-width = <4>; + max-frequency = <50000000>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mmc1>; + + brcmf: wifi@1 { +/* reg = <4>;*/ + compatible = "brcm,bcm4330-fmac"; + vcc-supply = <&wlan0_power>; + device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + }; +}; + +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart0>; +}; + +&uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart1>; +}; + +&uart2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; + vcc-supply = <&wlan0_power>; + device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; + }; +}; + +&uart3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart3>; +}; + +&uart4 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart4>; +}; + +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0>; + + clock-frequency = <400000>; + + act8600: act8600@5a { + compatible = "active-semi,act8600"; + reg = <0x5a>; + status = "okay"; + + regulators { + vddcore: SUDCDC1 { + regulator-name = "DCDC_REG1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + vddmem: SUDCDC2 { + regulator-name = "DCDC_REG2"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + vcc_33: SUDCDC3 { + regulator-name = "DCDC_REG3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vcc_50: SUDCDC4 { + regulator-name = "SUDCDC_REG4"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + vcc_25: LDO_REG5 { + regulator-name = "LDO_REG5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + wifi_io: LDO_REG6 { + regulator-name = "LDO_REG6"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + vcc_28: LDO_REG7 { + regulator-name = "LDO_REG7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + vcc_15: LDO_REG8 { + regulator-name = "LDO_REG8"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + vrtc_18: LDO_REG9 { + regulator-name = "LDO_REG9"; + /* Despite the datasheet stating 3.3V + * for REG9 and the driver expecting that, + * REG9 outputs 1.8V. + * Likely the CI20 uses a proprietary + * factory programmed chip variant. + * Since this is a simple on/off LDO the + * exact values do not matter. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vcc_11: LDO_REG10 { + regulator-name = "LDO_REG10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c1>; + +}; + +&i2c2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c2>; + +}; + +&i2c3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c3>; + +}; + +&i2c4 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4>; + + clock-frequency = <400000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + + interrupt-parent = <&gpf>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&nemc { + status = "okay"; + + nandc: nand-controller@1 { + compatible = "ingenic,jz4780-nand"; + reg = <1 0 0x1000000>; + + #address-cells = <1>; + #size-cells = <0>; + + ingenic,bch-controller = <&bch>; + + ingenic,nemc-tAS = <10>; + ingenic,nemc-tAH = <5>; + ingenic,nemc-tBP = <10>; + ingenic,nemc-tAW = <15>; + ingenic,nemc-tSTRV = <100>; + + /* + * Only CLE/ALE are needed for the devices that are connected, rather + * than the full address line set. + */ + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc>; + + nand@1 { + reg = <1>; + + nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <2>; + #size-cells = <2>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x0 0x0 0x800000>; + }; + + partition@800000 { + label = "u-boot"; + reg = <0x0 0x800000 0x0 0x200000>; + }; + + partition@a00000 { + label = "u-boot-env"; + reg = <0x0 0xa00000 0x0 0x200000>; + }; + + partition@c00000 { + label = "boot"; + reg = <0x0 0xc00000 0x0 0x4000000>; + }; + + partition@4c00000 { + label = "system"; + reg = <0x0 0x4c00000 0x1 0xfb400000>; + }; + }; + }; + }; + + dm9000@6 { + compatible = "davicom,dm9000"; + davicom,no-eeprom; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs6>; + + reg = <6 0 1 /* addr */ + 6 2 1>; /* data */ + + ingenic,nemc-tAS = <15>; + ingenic,nemc-tAH = <10>; + ingenic,nemc-tBP = <20>; + ingenic,nemc-tAW = <50>; + ingenic,nemc-tSTRV = <100>; + + reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; + vcc-supply = <ð0_power>; + + interrupt-parent = <&gpe>; + interrupts = <19 4>; + + nvmem-cells = <ð0_addr>; + nvmem-cell-names = "mac-address"; + }; +}; + +&bch { + status = "okay"; +}; + +&otg_phy { + status = "okay"; + + vcc-supply = <&otg_power>; +}; + +&otg { + status = "okay"; +}; + +&pinctrl { + pins_uart0: uart0 { + function = "uart0"; + groups = "uart0-data"; + bias-disable; + }; + + pins_uart1: uart1 { + function = "uart1"; + groups = "uart1-data"; + bias-disable; + }; + + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data", "uart2-hwflow"; + bias-disable; + }; + + pins_uart3: uart3 { + function = "uart3"; + groups = "uart3-data", "uart3-hwflow"; + bias-disable; + }; + + pins_uart4: uart4 { + function = "uart4"; + groups = "uart4-data"; + bias-disable; + }; + + pins_i2c0: i2c0 { + function = "i2c0"; + groups = "i2c0-data"; + bias-disable; + }; + + pins_i2c1: i2c1 { + function = "i2c1"; + groups = "i2c1-data"; + bias-disable; + }; + + pins_i2c2: i2c2 { + function = "i2c2"; + groups = "i2c2-data"; + bias-disable; + }; + + pins_i2c3: i2c3 { + function = "i2c3"; + groups = "i2c3-data"; + bias-disable; + }; + + pins_i2c4: i2c4 { + function = "i2c4"; + groups = "i2c4-data-e"; + bias-disable; + }; + + pins_hdmi_ddc: hdmi_ddc { + function = "hdmi-ddc"; + groups = "hdmi-ddc"; + bias-disable; + }; + + pins_nemc: nemc { + function = "nemc"; + groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe"; + bias-disable; + }; + + pins_nemc_cs1: nemc-cs1 { + function = "nemc-cs1"; + groups = "nemc-cs1"; + bias-disable; + }; + + pins_nemc_cs6: nemc-cs6 { + function = "nemc-cs6"; + groups = "nemc-cs6"; + bias-disable; + }; + + pins_mmc0: mmc0 { + function = "mmc0"; + groups = "mmc0-1bit-e", "mmc0-4bit-e"; + bias-disable; + }; + + pins_mmc1: mmc1 { + function = "mmc1"; + groups = "mmc1-1bit-d", "mmc1-4bit-d"; + bias-disable; + }; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_hdmi_ddc>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dw_hdmi_in: endpoint { + remote-endpoint = <&lcd_out>; + }; + }; + + port@1 { + reg = <1>; + dw_hdmi_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; +}; + +&lcdc0 { + status = "okay"; + + port { + lcd_out: endpoint { + remote-endpoint = <&dw_hdmi_in>; + }; + }; +}; -- cgit v1.2.3