From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/mips/include/asm/mips-cpc.h | 179 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) create mode 100644 arch/mips/include/asm/mips-cpc.h (limited to 'arch/mips/include/asm/mips-cpc.h') diff --git a/arch/mips/include/asm/mips-cpc.h b/arch/mips/include/asm/mips-cpc.h new file mode 100644 index 000000000..b54453f16 --- /dev/null +++ b/arch/mips/include/asm/mips-cpc.h @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton + */ + +#ifndef __MIPS_ASM_MIPS_CPS_H__ +# error Please include asm/mips-cps.h rather than asm/mips-cpc.h +#endif + +#ifndef __MIPS_ASM_MIPS_CPC_H__ +#define __MIPS_ASM_MIPS_CPC_H__ + +#include +#include + +/* The base address of the CPC registers */ +extern void __iomem *mips_cpc_base; + +/** + * mips_cpc_default_phys_base - retrieve the default physical base address of + * the CPC + * + * Returns the default physical base address of the Cluster Power Controller + * memory mapped registers. This is platform dependant & must therefore be + * implemented per-platform. + */ +extern phys_addr_t mips_cpc_default_phys_base(void); + +/** + * mips_cpc_probe - probe for a Cluster Power Controller + * + * Attempt to detect the presence of a Cluster Power Controller. Returns 0 if + * a CPC is successfully detected, else -errno. + */ +#ifdef CONFIG_MIPS_CPC +extern int mips_cpc_probe(void); +#else +static inline int mips_cpc_probe(void) +{ + return -ENODEV; +} +#endif + +/** + * mips_cpc_present - determine whether a Cluster Power Controller is present + * + * Returns true if a CPC is present in the system, else false. + */ +static inline bool mips_cpc_present(void) +{ +#ifdef CONFIG_MIPS_CPC + return mips_cpc_base != NULL; +#else + return false; +#endif +} + +/* Offsets from the CPC base address to various control blocks */ +#define MIPS_CPC_GCB_OFS 0x0000 +#define MIPS_CPC_CLCB_OFS 0x2000 +#define MIPS_CPC_COCB_OFS 0x4000 + +#define CPC_ACCESSOR_RO(sz, off, name) \ + CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_GCB_OFS + off, name) \ + CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_COCB_OFS + off, redir_##name) + +#define CPC_ACCESSOR_RW(sz, off, name) \ + CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_GCB_OFS + off, name) \ + CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_COCB_OFS + off, redir_##name) + +#define CPC_CX_ACCESSOR_RO(sz, off, name) \ + CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_CLCB_OFS + off, cl_##name) \ + CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_COCB_OFS + off, co_##name) + +#define CPC_CX_ACCESSOR_RW(sz, off, name) \ + CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_CLCB_OFS + off, cl_##name) \ + CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_COCB_OFS + off, co_##name) + +/* CPC_ACCESS - Control core/IOCU access to CPC registers prior to CM 3 */ +CPC_ACCESSOR_RW(32, 0x000, access) + +/* CPC_SEQDEL - Configure delays between command sequencer steps */ +CPC_ACCESSOR_RW(32, 0x008, seqdel) + +/* CPC_RAIL - Configure the delay from rail power-up to stability */ +CPC_ACCESSOR_RW(32, 0x010, rail) + +/* CPC_RESETLEN - Configure the length of reset sequences */ +CPC_ACCESSOR_RW(32, 0x018, resetlen) + +/* CPC_REVISION - Indicates the revisison of the CPC */ +CPC_ACCESSOR_RO(32, 0x020, revision) + +/* CPC_PWRUP_CTL - Control power to the Coherence Manager (CM) */ +CPC_ACCESSOR_RW(32, 0x030, pwrup_ctl) +#define CPC_PWRUP_CTL_CM_PWRUP BIT(0) + +/* CPC_CONFIG - Mirrors GCR_CONFIG */ +CPC_ACCESSOR_RW(64, 0x138, config) + +/* CPC_SYS_CONFIG - Control cluster endianness */ +CPC_ACCESSOR_RW(32, 0x140, sys_config) +#define CPC_SYS_CONFIG_BE_IMMEDIATE BIT(2) +#define CPC_SYS_CONFIG_BE_STATUS BIT(1) +#define CPC_SYS_CONFIG_BE BIT(0) + +/* CPC_Cx_CMD - Instruct the CPC to take action on a core */ +CPC_CX_ACCESSOR_RW(32, 0x000, cmd) +#define CPC_Cx_CMD GENMASK(3, 0) +#define CPC_Cx_CMD_CLOCKOFF 0x1 +#define CPC_Cx_CMD_PWRDOWN 0x2 +#define CPC_Cx_CMD_PWRUP 0x3 +#define CPC_Cx_CMD_RESET 0x4 + +/* CPC_Cx_STAT_CONF - Indicates core configuration & state */ +CPC_CX_ACCESSOR_RW(32, 0x008, stat_conf) +#define CPC_Cx_STAT_CONF_PWRUPE BIT(23) +#define CPC_Cx_STAT_CONF_SEQSTATE GENMASK(22, 19) +#define CPC_Cx_STAT_CONF_SEQSTATE_D0 0x0 +#define CPC_Cx_STAT_CONF_SEQSTATE_U0 0x1 +#define CPC_Cx_STAT_CONF_SEQSTATE_U1 0x2 +#define CPC_Cx_STAT_CONF_SEQSTATE_U2 0x3 +#define CPC_Cx_STAT_CONF_SEQSTATE_U3 0x4 +#define CPC_Cx_STAT_CONF_SEQSTATE_U4 0x5 +#define CPC_Cx_STAT_CONF_SEQSTATE_U5 0x6 +#define CPC_Cx_STAT_CONF_SEQSTATE_U6 0x7 +#define CPC_Cx_STAT_CONF_SEQSTATE_D1 0x8 +#define CPC_Cx_STAT_CONF_SEQSTATE_D3 0x9 +#define CPC_Cx_STAT_CONF_SEQSTATE_D2 0xa +#define CPC_Cx_STAT_CONF_CLKGAT_IMPL BIT(17) +#define CPC_Cx_STAT_CONF_PWRDN_IMPL BIT(16) +#define CPC_Cx_STAT_CONF_EJTAG_PROBE BIT(15) + +/* CPC_Cx_OTHER - Configure the core-other register block prior to CM 3 */ +CPC_CX_ACCESSOR_RW(32, 0x010, other) +#define CPC_Cx_OTHER_CORENUM GENMASK(23, 16) + +/* CPC_Cx_VP_STOP - Stop Virtual Processors (VPs) within a core from running */ +CPC_CX_ACCESSOR_RW(32, 0x020, vp_stop) + +/* CPC_Cx_VP_START - Start Virtual Processors (VPs) within a core running */ +CPC_CX_ACCESSOR_RW(32, 0x028, vp_run) + +/* CPC_Cx_VP_RUNNING - Indicate which Virtual Processors (VPs) are running */ +CPC_CX_ACCESSOR_RW(32, 0x030, vp_running) + +/* CPC_Cx_CONFIG - Mirrors GCR_Cx_CONFIG */ +CPC_CX_ACCESSOR_RW(32, 0x090, config) + +#ifdef CONFIG_MIPS_CPC + +/** + * mips_cpc_lock_other - lock access to another core + * core: the other core to be accessed + * + * Call before operating upon a core via the 'other' register region in + * order to prevent the region being moved during access. Must be called + * within the bounds of a mips_cm_{lock,unlock}_other pair, and followed + * by a call to mips_cpc_unlock_other. + */ +extern void mips_cpc_lock_other(unsigned int core); + +/** + * mips_cpc_unlock_other - unlock access to another core + * + * Call after operating upon another core via the 'other' register region. + * Must be called after mips_cpc_lock_other. + */ +extern void mips_cpc_unlock_other(void); + +#else /* !CONFIG_MIPS_CPC */ + +static inline void mips_cpc_lock_other(unsigned int core) { } +static inline void mips_cpc_unlock_other(void) { } + +#endif /* !CONFIG_MIPS_CPC */ + +#endif /* __MIPS_ASM_MIPS_CPC_H__ */ -- cgit v1.2.3