From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/mips/kernel/kprobes.c | 525 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 525 insertions(+) create mode 100644 arch/mips/kernel/kprobes.c (limited to 'arch/mips/kernel/kprobes.c') diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c new file mode 100644 index 000000000..316b27d0d --- /dev/null +++ b/arch/mips/kernel/kprobes.c @@ -0,0 +1,525 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Kernel Probes (KProbes) + * arch/mips/kernel/kprobes.c + * + * Copyright 2006 Sony Corp. + * Copyright 2010 Cavium Networks + * + * Some portions copied from the powerpc version. + * + * Copyright (C) IBM Corporation, 2002, 2004 + */ + +#define pr_fmt(fmt) "kprobes: " fmt + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "probes-common.h" + +static const union mips_instruction breakpoint_insn = { + .b_format = { + .opcode = spec_op, + .code = BRK_KPROBE_BP, + .func = break_op + } +}; + +static const union mips_instruction breakpoint2_insn = { + .b_format = { + .opcode = spec_op, + .code = BRK_KPROBE_SSTEPBP, + .func = break_op + } +}; + +DEFINE_PER_CPU(struct kprobe *, current_kprobe); +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + +static int insn_has_delayslot(union mips_instruction insn) +{ + return __insn_has_delay_slot(insn); +} +NOKPROBE_SYMBOL(insn_has_delayslot); + +/* + * insn_has_ll_or_sc function checks whether instruction is ll or sc + * one; putting breakpoint on top of atomic ll/sc pair is bad idea; + * so we need to prevent it and refuse kprobes insertion for such + * instructions; cannot do much about breakpoint in the middle of + * ll/sc pair; it is upto user to avoid those places + */ +static int insn_has_ll_or_sc(union mips_instruction insn) +{ + int ret = 0; + + switch (insn.i_format.opcode) { + case ll_op: + case lld_op: + case sc_op: + case scd_op: + ret = 1; + break; + default: + break; + } + return ret; +} +NOKPROBE_SYMBOL(insn_has_ll_or_sc); + +int arch_prepare_kprobe(struct kprobe *p) +{ + union mips_instruction insn; + union mips_instruction prev_insn; + int ret = 0; + + insn = p->addr[0]; + + if (insn_has_ll_or_sc(insn)) { + pr_notice("Kprobes for ll and sc instructions are not supported\n"); + ret = -EINVAL; + goto out; + } + + if (copy_from_kernel_nofault(&prev_insn, p->addr - 1, + sizeof(mips_instruction)) == 0 && + insn_has_delayslot(prev_insn)) { + pr_notice("Kprobes for branch delayslot are not supported\n"); + ret = -EINVAL; + goto out; + } + + if (__insn_is_compact_branch(insn)) { + pr_notice("Kprobes for compact branches are not supported\n"); + ret = -EINVAL; + goto out; + } + + /* insn: must be on special executable page on mips. */ + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) { + ret = -ENOMEM; + goto out; + } + + /* + * In the kprobe->ainsn.insn[] array we store the original + * instruction at index zero and a break trap instruction at + * index one. + * + * On MIPS arch if the instruction at probed address is a + * branch instruction, we need to execute the instruction at + * Branch Delayslot (BD) at the time of probe hit. As MIPS also + * doesn't have single stepping support, the BD instruction can + * not be executed in-line and it would be executed on SSOL slot + * using a normal breakpoint instruction in the next slot. + * So, read the instruction and save it for later execution. + */ + if (insn_has_delayslot(insn)) + memcpy(&p->ainsn.insn[0], p->addr + 1, sizeof(kprobe_opcode_t)); + else + memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t)); + + p->ainsn.insn[1] = breakpoint2_insn; + p->opcode = *p->addr; + +out: + return ret; +} +NOKPROBE_SYMBOL(arch_prepare_kprobe); + +void arch_arm_kprobe(struct kprobe *p) +{ + *p->addr = breakpoint_insn; + flush_insn_slot(p); +} +NOKPROBE_SYMBOL(arch_arm_kprobe); + +void arch_disarm_kprobe(struct kprobe *p) +{ + *p->addr = p->opcode; + flush_insn_slot(p); +} +NOKPROBE_SYMBOL(arch_disarm_kprobe); + +void arch_remove_kprobe(struct kprobe *p) +{ + if (p->ainsn.insn) { + free_insn_slot(p->ainsn.insn, 0); + p->ainsn.insn = NULL; + } +} +NOKPROBE_SYMBOL(arch_remove_kprobe); + +static void save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_SR = kcb->kprobe_old_SR; + kcb->prev_kprobe.saved_SR = kcb->kprobe_saved_SR; + kcb->prev_kprobe.saved_epc = kcb->kprobe_saved_epc; +} + +static void restore_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp); + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_SR = kcb->prev_kprobe.old_SR; + kcb->kprobe_saved_SR = kcb->prev_kprobe.saved_SR; + kcb->kprobe_saved_epc = kcb->prev_kprobe.saved_epc; +} + +static void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + __this_cpu_write(current_kprobe, p); + kcb->kprobe_saved_SR = kcb->kprobe_old_SR = (regs->cp0_status & ST0_IE); + kcb->kprobe_saved_epc = regs->cp0_epc; +} + +/** + * evaluate_branch_instrucion - + * + * Evaluate the branch instruction at probed address during probe hit. The + * result of evaluation would be the updated epc. The insturction in delayslot + * would actually be single stepped using a normal breakpoint) on SSOL slot. + * + * The result is also saved in the kprobe control block for later use, + * in case we need to execute the delayslot instruction. The latter will be + * false for NOP instruction in dealyslot and the branch-likely instructions + * when the branch is taken. And for those cases we set a flag as + * SKIP_DELAYSLOT in the kprobe control block + */ +static int evaluate_branch_instruction(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + union mips_instruction insn = p->opcode; + long epc; + int ret = 0; + + epc = regs->cp0_epc; + if (epc & 3) + goto unaligned; + + if (p->ainsn.insn->word == 0) + kcb->flags |= SKIP_DELAYSLOT; + else + kcb->flags &= ~SKIP_DELAYSLOT; + + ret = __compute_return_epc_for_insn(regs, insn); + if (ret < 0) + return ret; + + if (ret == BRANCH_LIKELY_TAKEN) + kcb->flags |= SKIP_DELAYSLOT; + + kcb->target_epc = regs->cp0_epc; + + return 0; + +unaligned: + pr_notice("Failed to emulate branch instruction because of unaligned epc - sending SIGBUS to %s.\n", current->comm); + force_sig(SIGBUS); + return -EFAULT; + +} + +static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + int ret = 0; + + regs->cp0_status &= ~ST0_IE; + + /* single step inline if the instruction is a break */ + if (p->opcode.word == breakpoint_insn.word || + p->opcode.word == breakpoint2_insn.word) + regs->cp0_epc = (unsigned long)p->addr; + else if (insn_has_delayslot(p->opcode)) { + ret = evaluate_branch_instruction(p, regs, kcb); + if (ret < 0) + return; + } + regs->cp0_epc = (unsigned long)&p->ainsn.insn[0]; +} + +/* + * Called after single-stepping. p->addr is the address of the + * instruction whose first byte has been replaced by the "break 0" + * instruction. To avoid the SMP problems that can occur when we + * temporarily put back the original opcode to single-step, we + * single-stepped a copy of the instruction. The address of this + * copy is p->ainsn.insn. + * + * This function prepares to return from the post-single-step + * breakpoint trap. In case of branch instructions, the target + * epc to be restored. + */ +static void resume_execution(struct kprobe *p, + struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + if (insn_has_delayslot(p->opcode)) + regs->cp0_epc = kcb->target_epc; + else { + unsigned long orig_epc = kcb->kprobe_saved_epc; + regs->cp0_epc = orig_epc + 4; + } +} +NOKPROBE_SYMBOL(resume_execution); + +static int kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *p; + int ret = 0; + kprobe_opcode_t *addr; + struct kprobe_ctlblk *kcb; + + addr = (kprobe_opcode_t *) regs->cp0_epc; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); + + /* Check we're not actually recursing */ + if (kprobe_running()) { + p = get_kprobe(addr); + if (p) { + if (kcb->kprobe_status == KPROBE_HIT_SS && + p->ainsn.insn->word == breakpoint_insn.word) { + regs->cp0_status &= ~ST0_IE; + regs->cp0_status |= kcb->kprobe_saved_SR; + goto no_kprobe; + } + /* + * We have reentered the kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kprobes_inc_nmissed_count(p); + prepare_singlestep(p, regs, kcb); + kcb->kprobe_status = KPROBE_REENTER; + if (kcb->flags & SKIP_DELAYSLOT) { + resume_execution(p, regs, kcb); + restore_previous_kprobe(kcb); + preempt_enable_no_resched(); + } + return 1; + } else if (addr->word != breakpoint_insn.word) { + /* + * The breakpoint instruction was removed by + * another cpu right after we hit, no further + * handling of this interrupt is appropriate + */ + ret = 1; + } + goto no_kprobe; + } + + p = get_kprobe(addr); + if (!p) { + if (addr->word != breakpoint_insn.word) { + /* + * The breakpoint instruction was removed right + * after we hit it. Another cpu has removed + * either a probepoint or a debugger breakpoint + * at this address. In either case, no further + * handling of this interrupt is appropriate. + */ + ret = 1; + } + /* Not one of ours: let kernel handle it */ + goto no_kprobe; + } + + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + + if (p->pre_handler && p->pre_handler(p, regs)) { + /* handler has already set things up, so skip ss setup */ + reset_current_kprobe(); + preempt_enable_no_resched(); + return 1; + } + + prepare_singlestep(p, regs, kcb); + if (kcb->flags & SKIP_DELAYSLOT) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + if (p->post_handler) + p->post_handler(p, regs, 0); + resume_execution(p, regs, kcb); + preempt_enable_no_resched(); + } else + kcb->kprobe_status = KPROBE_HIT_SS; + + return 1; + +no_kprobe: + preempt_enable_no_resched(); + return ret; + +} +NOKPROBE_SYMBOL(kprobe_handler); + +static inline int post_kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) + return 0; + + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + + resume_execution(cur, regs, kcb); + + regs->cp0_status |= kcb->kprobe_saved_SR; + + /* Restore back the original saved kprobes variables and continue. */ + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); + goto out; + } + reset_current_kprobe(); +out: + preempt_enable_no_resched(); + + return 1; +} + +int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->cp0_status |= kcb->kprobe_old_SR; + + reset_current_kprobe(); + preempt_enable_no_resched(); + } + return 0; +} + +/* + * Wrapper routine for handling exceptions. + */ +int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + switch (val) { + case DIE_BREAK: + if (kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_SSTEPBP: + if (post_kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + + case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + + if (kprobe_running() + && kprobe_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + preempt_enable(); + break; + default: + break; + } + return ret; +} +NOKPROBE_SYMBOL(kprobe_exceptions_notify); + +/* + * Function return probe trampoline: + * - init_kprobes() establishes a probepoint here + * - When the probed function returns, this probe causes the + * handlers to fire + */ +static void __used kretprobe_trampoline_holder(void) +{ + asm volatile( + ".set push\n\t" + /* Keep the assembler from reordering and placing JR here. */ + ".set noreorder\n\t" + "nop\n\t" + ".global __kretprobe_trampoline\n" + "__kretprobe_trampoline:\n\t" + "nop\n\t" + ".set pop" + : : : "memory"); +} + +void __kretprobe_trampoline(void); + +void arch_prepare_kretprobe(struct kretprobe_instance *ri, + struct pt_regs *regs) +{ + ri->ret_addr = (kprobe_opcode_t *) regs->regs[31]; + ri->fp = NULL; + + /* Replace the return addr with trampoline addr */ + regs->regs[31] = (unsigned long)__kretprobe_trampoline; +} +NOKPROBE_SYMBOL(arch_prepare_kretprobe); + +/* + * Called when the probe at kretprobe trampoline is hit + */ +static int trampoline_probe_handler(struct kprobe *p, + struct pt_regs *regs) +{ + instruction_pointer(regs) = __kretprobe_trampoline_handler(regs, NULL); + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ + return 1; +} +NOKPROBE_SYMBOL(trampoline_probe_handler); + +int arch_trampoline_kprobe(struct kprobe *p) +{ + if (p->addr == (kprobe_opcode_t *)__kretprobe_trampoline) + return 1; + + return 0; +} +NOKPROBE_SYMBOL(arch_trampoline_kprobe); + +static struct kprobe trampoline_p = { + .addr = (kprobe_opcode_t *)__kretprobe_trampoline, + .pre_handler = trampoline_probe_handler +}; + +int __init arch_init_kprobes(void) +{ + return register_kprobe(&trampoline_p); +} -- cgit v1.2.3