From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/mips/kernel/mips-cm.c | 515 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 515 insertions(+) create mode 100644 arch/mips/kernel/mips-cm.c (limited to 'arch/mips/kernel/mips-cm.c') diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c new file mode 100644 index 000000000..b4f7d950c --- /dev/null +++ b/arch/mips/kernel/mips-cm.c @@ -0,0 +1,515 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton + */ + +#include +#include +#include + +#include +#include + +void __iomem *mips_gcr_base; +void __iomem *mips_cm_l2sync_base; +int mips_cm_is64; + +static char *cm2_tr[8] = { + "mem", "gcr", "gic", "mmio", + "0x04", "cpc", "0x06", "0x07" +}; + +/* CM3 Tag ECC transaction type */ +static char *cm3_tr[16] = { + [0x0] = "ReqNoData", + [0x1] = "0x1", + [0x2] = "ReqWData", + [0x3] = "0x3", + [0x4] = "IReqNoResp", + [0x5] = "IReqWResp", + [0x6] = "IReqNoRespDat", + [0x7] = "IReqWRespDat", + [0x8] = "RespNoData", + [0x9] = "RespDataFol", + [0xa] = "RespWData", + [0xb] = "RespDataOnly", + [0xc] = "IRespNoData", + [0xd] = "IRespDataFol", + [0xe] = "IRespWData", + [0xf] = "IRespDataOnly" +}; + +static char *cm2_cmd[32] = { + [0x00] = "0x00", + [0x01] = "Legacy Write", + [0x02] = "Legacy Read", + [0x03] = "0x03", + [0x04] = "0x04", + [0x05] = "0x05", + [0x06] = "0x06", + [0x07] = "0x07", + [0x08] = "Coherent Read Own", + [0x09] = "Coherent Read Share", + [0x0a] = "Coherent Read Discard", + [0x0b] = "Coherent Ready Share Always", + [0x0c] = "Coherent Upgrade", + [0x0d] = "Coherent Writeback", + [0x0e] = "0x0e", + [0x0f] = "0x0f", + [0x10] = "Coherent Copyback", + [0x11] = "Coherent Copyback Invalidate", + [0x12] = "Coherent Invalidate", + [0x13] = "Coherent Write Invalidate", + [0x14] = "Coherent Completion Sync", + [0x15] = "0x15", + [0x16] = "0x16", + [0x17] = "0x17", + [0x18] = "0x18", + [0x19] = "0x19", + [0x1a] = "0x1a", + [0x1b] = "0x1b", + [0x1c] = "0x1c", + [0x1d] = "0x1d", + [0x1e] = "0x1e", + [0x1f] = "0x1f" +}; + +/* CM3 Tag ECC command type */ +static char *cm3_cmd[16] = { + [0x0] = "Legacy Read", + [0x1] = "Legacy Write", + [0x2] = "Coherent Read Own", + [0x3] = "Coherent Read Share", + [0x4] = "Coherent Read Discard", + [0x5] = "Coherent Evicted", + [0x6] = "Coherent Upgrade", + [0x7] = "Coherent Upgrade for Store Conditional", + [0x8] = "Coherent Writeback", + [0x9] = "Coherent Write Invalidate", + [0xa] = "0xa", + [0xb] = "0xb", + [0xc] = "0xc", + [0xd] = "0xd", + [0xe] = "0xe", + [0xf] = "0xf" +}; + +/* CM3 Tag ECC command group */ +static char *cm3_cmd_group[8] = { + [0x0] = "Normal", + [0x1] = "Registers", + [0x2] = "TLB", + [0x3] = "0x3", + [0x4] = "L1I", + [0x5] = "L1D", + [0x6] = "L3", + [0x7] = "L2" +}; + +static char *cm2_core[8] = { + "Invalid/OK", "Invalid/Data", + "Shared/OK", "Shared/Data", + "Modified/OK", "Modified/Data", + "Exclusive/OK", "Exclusive/Data" +}; + +static char *cm2_l2_type[4] = { + [0x0] = "None", + [0x1] = "Tag RAM single/double ECC error", + [0x2] = "Data RAM single/double ECC error", + [0x3] = "WS RAM uncorrectable dirty parity" +}; + +static char *cm2_l2_instr[32] = { + [0x00] = "L2_NOP", + [0x01] = "L2_ERR_CORR", + [0x02] = "L2_TAG_INV", + [0x03] = "L2_WS_CLEAN", + [0x04] = "L2_RD_MDYFY_WR", + [0x05] = "L2_WS_MRU", + [0x06] = "L2_EVICT_LN2", + [0x07] = "0x07", + [0x08] = "L2_EVICT", + [0x09] = "L2_REFL", + [0x0a] = "L2_RD", + [0x0b] = "L2_WR", + [0x0c] = "L2_EVICT_MRU", + [0x0d] = "L2_SYNC", + [0x0e] = "L2_REFL_ERR", + [0x0f] = "0x0f", + [0x10] = "L2_INDX_WB_INV", + [0x11] = "L2_INDX_LD_TAG", + [0x12] = "L2_INDX_ST_TAG", + [0x13] = "L2_INDX_ST_DATA", + [0x14] = "L2_INDX_ST_ECC", + [0x15] = "0x15", + [0x16] = "0x16", + [0x17] = "0x17", + [0x18] = "L2_FTCH_AND_LCK", + [0x19] = "L2_HIT_INV", + [0x1a] = "L2_HIT_WB_INV", + [0x1b] = "L2_HIT_WB", + [0x1c] = "0x1c", + [0x1d] = "0x1d", + [0x1e] = "0x1e", + [0x1f] = "0x1f" +}; + +static char *cm2_causes[32] = { + "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", + "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", + "0x08", "0x09", "0x0a", "0x0b", + "0x0c", "0x0d", "0x0e", "0x0f", + "0x10", "INTVN_WR_ERR", "INTVN_RD_ERR", "0x13", + "0x14", "0x15", "0x16", "0x17", + "L2_RD_UNCORR", "L2_WR_UNCORR", "L2_CORR", "0x1b", + "0x1c", "0x1d", "0x1e", "0x1f" +}; + +static char *cm3_causes[32] = { + "0x0", "MP_CORRECTABLE_ECC_ERR", "MP_REQUEST_DECODE_ERR", + "MP_UNCORRECTABLE_ECC_ERR", "MP_PARITY_ERR", "MP_COHERENCE_ERR", + "CMBIU_REQUEST_DECODE_ERR", "CMBIU_PARITY_ERR", "CMBIU_AXI_RESP_ERR", + "0x9", "RBI_BUS_ERR", "0xb", "0xc", "0xd", "0xe", "0xf", "0x10", + "0x11", "0x12", "0x13", "0x14", "0x15", "0x16", "0x17", "0x18", + "0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f" +}; + +static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock); +static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags); + +phys_addr_t __mips_cm_phys_base(void) +{ + u32 config3 = read_c0_config3(); + unsigned long cmgcr; + + /* Check the CMGCRBase register is implemented */ + if (!(config3 & MIPS_CONF3_CMGCR)) + return 0; + + /* Read the address from CMGCRBase */ + cmgcr = read_c0_cmgcrbase(); + return (cmgcr & MIPS_CMGCRF_BASE) << (36 - 32); +} + +phys_addr_t mips_cm_phys_base(void) + __attribute__((weak, alias("__mips_cm_phys_base"))); + +phys_addr_t __mips_cm_l2sync_phys_base(void) +{ + u32 base_reg; + + /* + * If the L2-only sync region is already enabled then leave it at it's + * current location. + */ + base_reg = read_gcr_l2_only_sync_base(); + if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN) + return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE; + + /* Default to following the CM */ + return mips_cm_phys_base() + MIPS_CM_GCR_SIZE; +} + +phys_addr_t mips_cm_l2sync_phys_base(void) + __attribute__((weak, alias("__mips_cm_l2sync_phys_base"))); + +static void mips_cm_probe_l2sync(void) +{ + unsigned major_rev; + phys_addr_t addr; + + /* L2-only sync was introduced with CM major revision 6 */ + major_rev = FIELD_GET(CM_GCR_REV_MAJOR, read_gcr_rev()); + if (major_rev < 6) + return; + + /* Find a location for the L2 sync region */ + addr = mips_cm_l2sync_phys_base(); + BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE) != addr); + if (!addr) + return; + + /* Set the region base address & enable it */ + write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN); + + /* Map the region */ + mips_cm_l2sync_base = ioremap(addr, MIPS_CM_L2SYNC_SIZE); +} + +int mips_cm_probe(void) +{ + phys_addr_t addr; + u32 base_reg; + unsigned cpu; + + /* + * No need to probe again if we have already been + * here before. + */ + if (mips_gcr_base) + return 0; + + addr = mips_cm_phys_base(); + BUG_ON((addr & CM_GCR_BASE_GCRBASE) != addr); + if (!addr) + return -ENODEV; + + mips_gcr_base = ioremap(addr, MIPS_CM_GCR_SIZE); + if (!mips_gcr_base) + return -ENXIO; + + /* sanity check that we're looking at a CM */ + base_reg = read_gcr_base(); + if ((base_reg & CM_GCR_BASE_GCRBASE) != addr) { + pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n", + (unsigned long)addr); + iounmap(mips_gcr_base); + mips_gcr_base = NULL; + return -ENODEV; + } + + /* set default target to memory */ + change_gcr_base(CM_GCR_BASE_CMDEFTGT, CM_GCR_BASE_CMDEFTGT_MEM); + + /* disable CM regions */ + write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK); + write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK); + write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK); + write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK); + + /* probe for an L2-only sync region */ + mips_cm_probe_l2sync(); + + /* determine register width for this CM */ + mips_cm_is64 = IS_ENABLED(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3); + + for_each_possible_cpu(cpu) + spin_lock_init(&per_cpu(cm_core_lock, cpu)); + + return 0; +} + +void mips_cm_lock_other(unsigned int cluster, unsigned int core, + unsigned int vp, unsigned int block) +{ + unsigned int curr_core, cm_rev; + u32 val; + + cm_rev = mips_cm_revision(); + preempt_disable(); + + if (cm_rev >= CM_REV_CM3) { + val = FIELD_PREP(CM3_GCR_Cx_OTHER_CORE, core) | + FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp); + + if (cm_rev >= CM_REV_CM3_5) { + val |= CM_GCR_Cx_OTHER_CLUSTER_EN; + val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster); + val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block); + } else { + WARN_ON(cluster != 0); + WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL); + } + + /* + * We need to disable interrupts in SMP systems in order to + * ensure that we don't interrupt the caller with code which + * may modify the redirect register. We do so here in a + * slightly obscure way by using a spin lock, since this has + * the neat property of also catching any nested uses of + * mips_cm_lock_other() leading to a deadlock or a nice warning + * with lockdep enabled. + */ + spin_lock_irqsave(this_cpu_ptr(&cm_core_lock), + *this_cpu_ptr(&cm_core_lock_flags)); + } else { + WARN_ON(cluster != 0); + WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL); + + /* + * We only have a GCR_CL_OTHER per core in systems with + * CM 2.5 & older, so have to ensure other VP(E)s don't + * race with us. + */ + curr_core = cpu_core(¤t_cpu_data); + spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core), + per_cpu(cm_core_lock_flags, curr_core)); + + val = FIELD_PREP(CM_GCR_Cx_OTHER_CORENUM, core); + } + + write_gcr_cl_other(val); + + /* + * Ensure the core-other region reflects the appropriate core & + * VP before any accesses to it occur. + */ + mb(); +} + +void mips_cm_unlock_other(void) +{ + unsigned int curr_core; + + if (mips_cm_revision() < CM_REV_CM3) { + curr_core = cpu_core(¤t_cpu_data); + spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core), + per_cpu(cm_core_lock_flags, curr_core)); + } else { + spin_unlock_irqrestore(this_cpu_ptr(&cm_core_lock), + *this_cpu_ptr(&cm_core_lock_flags)); + } + + preempt_enable(); +} + +void mips_cm_error_report(void) +{ + u64 cm_error, cm_addr, cm_other; + unsigned long revision; + int ocause, cause; + char buf[256]; + + if (!mips_cm_present()) + return; + + revision = mips_cm_revision(); + cm_error = read_gcr_error_cause(); + cm_addr = read_gcr_error_addr(); + cm_other = read_gcr_error_mult(); + + if (revision < CM_REV_CM3) { /* CM2 */ + cause = FIELD_GET(CM_GCR_ERROR_CAUSE_ERRTYPE, cm_error); + ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other); + + if (!cause) + return; + + if (cause < 16) { + unsigned long cca_bits = (cm_error >> 15) & 7; + unsigned long tr_bits = (cm_error >> 12) & 7; + unsigned long cmd_bits = (cm_error >> 7) & 0x1f; + unsigned long stag_bits = (cm_error >> 3) & 15; + unsigned long sport_bits = (cm_error >> 0) & 7; + + snprintf(buf, sizeof(buf), + "CCA=%lu TR=%s MCmd=%s STag=%lu " + "SPort=%lu\n", cca_bits, cm2_tr[tr_bits], + cm2_cmd[cmd_bits], stag_bits, sport_bits); + } else if (cause < 24) { + /* glob state & sresp together */ + unsigned long c3_bits = (cm_error >> 18) & 7; + unsigned long c2_bits = (cm_error >> 15) & 7; + unsigned long c1_bits = (cm_error >> 12) & 7; + unsigned long c0_bits = (cm_error >> 9) & 7; + unsigned long sc_bit = (cm_error >> 8) & 1; + unsigned long cmd_bits = (cm_error >> 3) & 0x1f; + unsigned long sport_bits = (cm_error >> 0) & 7; + + snprintf(buf, sizeof(buf), + "C3=%s C2=%s C1=%s C0=%s SC=%s " + "MCmd=%s SPort=%lu\n", + cm2_core[c3_bits], cm2_core[c2_bits], + cm2_core[c1_bits], cm2_core[c0_bits], + sc_bit ? "True" : "False", + cm2_cmd[cmd_bits], sport_bits); + } else { + unsigned long muc_bit = (cm_error >> 23) & 1; + unsigned long ins_bits = (cm_error >> 18) & 0x1f; + unsigned long arr_bits = (cm_error >> 16) & 3; + unsigned long dw_bits = (cm_error >> 12) & 15; + unsigned long way_bits = (cm_error >> 9) & 7; + unsigned long mway_bit = (cm_error >> 8) & 1; + unsigned long syn_bits = (cm_error >> 0) & 0xFF; + + snprintf(buf, sizeof(buf), + "Type=%s%s Instr=%s DW=%lu Way=%lu " + "MWay=%s Syndrome=0x%02lx", + muc_bit ? "Multi-UC " : "", + cm2_l2_type[arr_bits], + cm2_l2_instr[ins_bits], dw_bits, way_bits, + mway_bit ? "True" : "False", syn_bits); + } + pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error, + cm2_causes[cause], buf); + pr_err("CM_ADDR =%08llx\n", cm_addr); + pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]); + } else { /* CM3 */ + ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits; + ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit; + + cause = FIELD_GET(CM3_GCR_ERROR_CAUSE_ERRTYPE, cm_error); + ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other); + + if (!cause) + return; + + /* Used by cause == {1,2,3} */ + core_id_bits = (cm_error >> 22) & 0xf; + vp_id_bits = (cm_error >> 18) & 0xf; + cmd_bits = (cm_error >> 14) & 0xf; + cmd_group_bits = (cm_error >> 11) & 0xf; + cm3_cca_bits = (cm_error >> 8) & 7; + mcp_bits = (cm_error >> 5) & 0xf; + cm3_tr_bits = (cm_error >> 1) & 0xf; + sched_bit = cm_error & 0x1; + + if (cause == 1 || cause == 3) { /* Tag ECC */ + unsigned long tag_ecc = (cm_error >> 57) & 0x1; + unsigned long tag_way_bits = (cm_error >> 29) & 0xffff; + unsigned long dword_bits = (cm_error >> 49) & 0xff; + unsigned long data_way_bits = (cm_error >> 45) & 0xf; + unsigned long data_sets_bits = (cm_error >> 29) & 0xfff; + unsigned long bank_bit = (cm_error >> 28) & 0x1; + snprintf(buf, sizeof(buf), + "%s ECC Error: Way=%lu (DWORD=%lu, Sets=%lu)" + "Bank=%lu CoreID=%lu VPID=%lu Command=%s" + "Command Group=%s CCA=%lu MCP=%d" + "Transaction type=%s Scheduler=%lu\n", + tag_ecc ? "TAG" : "DATA", + tag_ecc ? (unsigned long)ffs(tag_way_bits) - 1 : + data_way_bits, bank_bit, dword_bits, + data_sets_bits, + core_id_bits, vp_id_bits, + cm3_cmd[cmd_bits], + cm3_cmd_group[cmd_group_bits], + cm3_cca_bits, 1 << mcp_bits, + cm3_tr[cm3_tr_bits], sched_bit); + } else if (cause == 2) { + unsigned long data_error_type = (cm_error >> 41) & 0xfff; + unsigned long data_decode_cmd = (cm_error >> 37) & 0xf; + unsigned long data_decode_group = (cm_error >> 34) & 0x7; + unsigned long data_decode_destination_id = (cm_error >> 28) & 0x3f; + + snprintf(buf, sizeof(buf), + "Decode Request Error: Type=%lu, Command=%lu" + "Command Group=%lu Destination ID=%lu" + "CoreID=%lu VPID=%lu Command=%s" + "Command Group=%s CCA=%lu MCP=%d" + "Transaction type=%s Scheduler=%lu\n", + data_error_type, data_decode_cmd, + data_decode_group, data_decode_destination_id, + core_id_bits, vp_id_bits, + cm3_cmd[cmd_bits], + cm3_cmd_group[cmd_group_bits], + cm3_cca_bits, 1 << mcp_bits, + cm3_tr[cm3_tr_bits], sched_bit); + } else { + buf[0] = 0; + } + + pr_err("CM_ERROR=%llx %s <%s>\n", cm_error, + cm3_causes[cause], buf); + pr_err("CM_ADDR =%llx\n", cm_addr); + pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]); + } + + /* reprime cause register */ + write_gcr_error_cause(cm_error); +} -- cgit v1.2.3