From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/mips/kernel/vpe-mt.c | 521 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 521 insertions(+) create mode 100644 arch/mips/kernel/vpe-mt.c (limited to 'arch/mips/kernel/vpe-mt.c') diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c new file mode 100644 index 000000000..84a82b551 --- /dev/null +++ b/arch/mips/kernel/vpe-mt.c @@ -0,0 +1,521 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Imagination Technologies Ltd. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static int major; + +/* The number of TCs and VPEs physically available on the core */ +static int hw_tcs, hw_vpes; + +/* We are prepared so configure and start the VPE... */ +int vpe_run(struct vpe *v) +{ + unsigned long flags, val, dmt_flag; + struct vpe_notifications *notifier; + unsigned int vpeflags; + struct tc *t; + + /* check we are the Master VPE */ + local_irq_save(flags); + val = read_c0_vpeconf0(); + if (!(val & VPECONF0_MVP)) { + pr_warn("VPE loader: only Master VPE's are able to config MT\n"); + local_irq_restore(flags); + + return -1; + } + + dmt_flag = dmt(); + vpeflags = dvpe(); + + if (list_empty(&v->tc)) { + evpe(vpeflags); + emt(dmt_flag); + local_irq_restore(flags); + + pr_warn("VPE loader: No TC's associated with VPE %d\n", + v->minor); + + return -ENOEXEC; + } + + t = list_first_entry(&v->tc, struct tc, tc); + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(t->index); + + /* should check it is halted, and not activated */ + if ((read_tc_c0_tcstatus() & TCSTATUS_A) || + !(read_tc_c0_tchalt() & TCHALT_H)) { + evpe(vpeflags); + emt(dmt_flag); + local_irq_restore(flags); + + pr_warn("VPE loader: TC %d is already active!\n", + t->index); + + return -ENOEXEC; + } + + /* + * Write the address we want it to start running from in the TCPC + * register. + */ + write_tc_c0_tcrestart((unsigned long)v->__start); + write_tc_c0_tccontext((unsigned long)0); + + /* + * Mark the TC as activated, not interrupt exempt and not dynamically + * allocatable + */ + val = read_tc_c0_tcstatus(); + val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A; + write_tc_c0_tcstatus(val); + + write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H); + + /* + * The sde-kit passes 'memsize' to __start in $a3, so set something + * here... Or set $a3 to zero and define DFLT_STACK_SIZE and + * DFLT_HEAP_SIZE when you compile your program + */ + mttgpr(6, v->ntcs); + mttgpr(7, physical_memsize); + + /* set up VPE1 */ + /* + * bind the TC to VPE 1 as late as possible so we only have the final + * VPE registers to set up, and so an EJTAG probe can trigger on it + */ + write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1); + + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA)); + + back_to_back_c0_hazard(); + + /* Set up the XTC bit in vpeconf0 to point at our tc */ + write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) + | (t->index << VPECONF0_XTC_SHIFT)); + + back_to_back_c0_hazard(); + + /* enable this VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); + + /* clear out any left overs from a previous program */ + write_vpe_c0_status(0); + write_vpe_c0_cause(0); + + /* take system out of configuration state */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + /* + * SMVP kernels manage VPE enable independently, but uniprocessor + * kernels need to turn it on, even if that wasn't the pre-dvpe() state. + */ +#ifdef CONFIG_SMP + evpe(vpeflags); +#else + evpe(EVPE_ENABLE); +#endif + emt(dmt_flag); + local_irq_restore(flags); + + list_for_each_entry(notifier, &v->notify, list) + notifier->start(VPE_MODULE_MINOR); + + return 0; +} + +void cleanup_tc(struct tc *tc) +{ + unsigned long flags; + unsigned int mtflags, vpflags; + int tmp; + + local_irq_save(flags); + mtflags = dmt(); + vpflags = dvpe(); + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(tc->index); + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + + clear_c0_mvpcontrol(MVPCONTROL_VPC); + evpe(vpflags); + emt(mtflags); + local_irq_restore(flags); +} + +/* module wrapper entry points */ +/* give me a vpe */ +void *vpe_alloc(void) +{ + int i; + struct vpe *v; + + /* find a vpe */ + for (i = 1; i < MAX_VPES; i++) { + v = get_vpe(i); + if (v != NULL) { + v->state = VPE_STATE_INUSE; + return v; + } + } + return NULL; +} +EXPORT_SYMBOL(vpe_alloc); + +/* start running from here */ +int vpe_start(void *vpe, unsigned long start) +{ + struct vpe *v = vpe; + + v->__start = start; + return vpe_run(v); +} +EXPORT_SYMBOL(vpe_start); + +/* halt it for now */ +int vpe_stop(void *vpe) +{ + struct vpe *v = vpe; + struct tc *t; + unsigned int evpe_flags; + + evpe_flags = dvpe(); + + t = list_entry(v->tc.next, struct tc, tc); + if (t != NULL) { + settc(t->index); + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); + } + + evpe(evpe_flags); + + return 0; +} +EXPORT_SYMBOL(vpe_stop); + +/* I've done with it thank you */ +int vpe_free(void *vpe) +{ + struct vpe *v = vpe; + struct tc *t; + unsigned int evpe_flags; + + t = list_entry(v->tc.next, struct tc, tc); + if (t == NULL) + return -ENOEXEC; + + evpe_flags = dvpe(); + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(t->index); + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); + + /* halt the TC */ + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + + /* mark the TC unallocated */ + write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A); + + v->state = VPE_STATE_UNUSED; + + clear_c0_mvpcontrol(MVPCONTROL_VPC); + evpe(evpe_flags); + + return 0; +} +EXPORT_SYMBOL(vpe_free); + +static ssize_t store_kill(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct vpe *vpe = get_vpe(aprp_cpu_index()); + struct vpe_notifications *notifier; + + list_for_each_entry(notifier, &vpe->notify, list) + notifier->stop(aprp_cpu_index()); + + release_progmem(vpe->load_addr); + cleanup_tc(get_tc(aprp_cpu_index())); + vpe_stop(vpe); + vpe_free(vpe); + + return len; +} +static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill); + +static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr, + char *buf) +{ + struct vpe *vpe = get_vpe(aprp_cpu_index()); + + return sprintf(buf, "%d\n", vpe->ntcs); +} + +static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct vpe *vpe = get_vpe(aprp_cpu_index()); + unsigned long new; + int ret; + + ret = kstrtoul(buf, 0, &new); + if (ret < 0) + return ret; + + if (new == 0 || new > (hw_tcs - aprp_cpu_index())) + return -EINVAL; + + vpe->ntcs = new; + + return len; +} +static DEVICE_ATTR_RW(ntcs); + +static struct attribute *vpe_attrs[] = { + &dev_attr_kill.attr, + &dev_attr_ntcs.attr, + NULL, +}; +ATTRIBUTE_GROUPS(vpe); + +static void vpe_device_release(struct device *cd) +{ +} + +static struct class vpe_class = { + .name = "vpe", + .owner = THIS_MODULE, + .dev_release = vpe_device_release, + .dev_groups = vpe_groups, +}; + +static struct device vpe_device; + +int __init vpe_module_init(void) +{ + unsigned int mtflags, vpflags; + unsigned long flags, val; + struct vpe *v = NULL; + struct tc *t; + int tc, err; + + if (!cpu_has_mipsmt) { + pr_warn("VPE loader: not a MIPS MT capable processor\n"); + return -ENODEV; + } + + if (vpelimit == 0) { + pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n" + "Pass maxvpes= argument as kernel argument\n"); + + return -ENODEV; + } + + if (aprp_cpu_index() == 0) { + pr_warn("No TCs reserved for AP/SP, not initialize VPE loader\n" + "Pass maxtcs= argument as kernel argument\n"); + + return -ENODEV; + } + + major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops); + if (major < 0) { + pr_warn("VPE loader: unable to register character device\n"); + return major; + } + + err = class_register(&vpe_class); + if (err) { + pr_err("vpe_class registration failed\n"); + goto out_chrdev; + } + + device_initialize(&vpe_device); + vpe_device.class = &vpe_class; + vpe_device.parent = NULL; + dev_set_name(&vpe_device, "vpe1"); + vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR); + err = device_add(&vpe_device); + if (err) { + pr_err("Adding vpe_device failed\n"); + goto out_class; + } + + local_irq_save(flags); + mtflags = dmt(); + vpflags = dvpe(); + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + val = read_c0_mvpconf0(); + hw_tcs = (val & MVPCONF0_PTC) + 1; + hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + + for (tc = aprp_cpu_index(); tc < hw_tcs; tc++) { + /* + * Must re-enable multithreading temporarily or in case we + * reschedule send IPIs or similar we might hang. + */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + evpe(vpflags); + emt(mtflags); + local_irq_restore(flags); + t = alloc_tc(tc); + if (!t) { + err = -ENOMEM; + goto out_dev; + } + + local_irq_save(flags); + mtflags = dmt(); + vpflags = dvpe(); + set_c0_mvpcontrol(MVPCONTROL_VPC); + + /* VPE's */ + if (tc < hw_tcs) { + settc(tc); + + v = alloc_vpe(tc); + if (v == NULL) { + pr_warn("VPE: unable to allocate VPE\n"); + goto out_reenable; + } + + v->ntcs = hw_tcs - aprp_cpu_index(); + + /* add the tc to the list of this vpe's tc's. */ + list_add(&t->tc, &v->tc); + + /* deactivate all but vpe0 */ + if (tc >= aprp_cpu_index()) { + unsigned long tmp = read_vpe_c0_vpeconf0(); + + tmp &= ~VPECONF0_VPA; + + /* master VPE */ + tmp |= VPECONF0_MVP; + write_vpe_c0_vpeconf0(tmp); + } + + /* disable multi-threading with TC's */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & + ~VPECONTROL_TE); + + if (tc >= vpelimit) { + /* + * Set config to be the same as vpe0, + * particularly kseg0 coherency alg + */ + write_vpe_c0_config(read_c0_config()); + } + } + + /* TC's */ + t->pvpe = v; /* set the parent vpe */ + + if (tc >= aprp_cpu_index()) { + unsigned long tmp; + + settc(tc); + + /* + * A TC that is bound to any other VPE gets bound to + * VPE0, ideally I'd like to make it homeless but it + * doesn't appear to let me bind a TC to a non-existent + * VPE. Which is perfectly reasonable. + * + * The (un)bound state is visible to an EJTAG probe so + * may notify GDB... + */ + tmp = read_tc_c0_tcbind(); + if (tmp & TCBIND_CURVPE) { + /* tc is bound >vpe0 */ + write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE); + + t->pvpe = get_vpe(0); /* set the parent vpe */ + } + + /* halt the TC */ + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + + tmp = read_tc_c0_tcstatus(); + + /* mark not activated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + } + } + +out_reenable: + /* release config state */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + evpe(vpflags); + emt(mtflags); + local_irq_restore(flags); + + return 0; + +out_dev: + device_del(&vpe_device); + +out_class: + put_device(&vpe_device); + class_unregister(&vpe_class); + +out_chrdev: + unregister_chrdev(major, VPE_MODULE_NAME); + + return err; +} + +void __exit vpe_module_exit(void) +{ + struct vpe *v, *n; + + device_unregister(&vpe_device); + class_unregister(&vpe_class); + unregister_chrdev(major, VPE_MODULE_NAME); + + /* No locking needed here */ + list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) { + if (v->state != VPE_STATE_UNUSED) + release_vpe(v); + } +} -- cgit v1.2.3