From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/mips/mm/sc-ip22.c | 190 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 arch/mips/mm/sc-ip22.c (limited to 'arch/mips/mm/sc-ip22.c') diff --git a/arch/mips/mm/sc-ip22.c b/arch/mips/mm/sc-ip22.c new file mode 100644 index 000000000..d7238687d --- /dev/null +++ b/arch/mips/mm/sc-ip22.c @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * sc-ip22.c: Indy cache management functions. + * + * Copyright (C) 1997, 2001 Ralf Baechle (ralf@gnu.org), + * derived from r4xx0.c by David S. Miller (davem@davemloft.net). + */ +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* Secondary cache size in bytes, if present. */ +static unsigned long scache_size; + +#undef DEBUG_CACHE + +#define SC_SIZE 0x00080000 +#define SC_LINE 32 +#define CI_MASK (SC_SIZE - SC_LINE) +#define SC_INDEX(n) ((n) & CI_MASK) + +static inline void indy_sc_wipe(unsigned long first, unsigned long last) +{ + unsigned long tmp; + + __asm__ __volatile__( + " .set push # indy_sc_wipe \n" + " .set noreorder \n" + " .set mips3 \n" + " .set noat \n" + " mfc0 %2, $12 \n" + " li $1, 0x80 # Go 64 bit \n" + " mtc0 $1, $12 \n" + " \n" + " # \n" + " # Open code a dli $1, 0x9000000080000000 \n" + " # \n" + " # Required because binutils 2.25 will happily accept \n" + " # 64 bit instructions in .set mips3 mode but puke on \n" + " # 64 bit constants when generating 32 bit ELF \n" + " # \n" + " lui $1,0x9000 \n" + " dsll $1,$1,0x10 \n" + " ori $1,$1,0x8000 \n" + " dsll $1,$1,0x10 \n" + " \n" + " or %0, $1 # first line to flush \n" + " or %1, $1 # last line to flush \n" + " .set at \n" + " \n" + "1: sw $0, 0(%0) \n" + " bne %0, %1, 1b \n" + " daddu %0, 32 \n" + " \n" + " mtc0 %2, $12 # Back to 32 bit \n" + " nop # pipeline hazard \n" + " nop \n" + " nop \n" + " nop \n" + " .set pop \n" + : "=r" (first), "=r" (last), "=&r" (tmp) + : "0" (first), "1" (last)); +} + +static void indy_sc_wback_invalidate(unsigned long addr, unsigned long size) +{ + unsigned long first_line, last_line; + unsigned long flags; + +#ifdef DEBUG_CACHE + printk("indy_sc_wback_invalidate[%08lx,%08lx]", addr, size); +#endif + + /* Catch bad driver code */ + BUG_ON(size == 0); + + /* Which lines to flush? */ + first_line = SC_INDEX(addr); + last_line = SC_INDEX(addr + size - 1); + + local_irq_save(flags); + if (first_line <= last_line) { + indy_sc_wipe(first_line, last_line); + goto out; + } + + indy_sc_wipe(first_line, SC_SIZE - SC_LINE); + indy_sc_wipe(0, last_line); +out: + local_irq_restore(flags); +} + +static void indy_sc_enable(void) +{ + unsigned long addr, tmp1, tmp2; + + /* This is really cool... */ +#ifdef DEBUG_CACHE + printk("Enabling R4600 SCACHE\n"); +#endif + __asm__ __volatile__( + ".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set\tmips3\n\t" + "mfc0\t%2, $12\n\t" + "nop; nop; nop; nop;\n\t" + "li\t%1, 0x80\n\t" + "mtc0\t%1, $12\n\t" + "nop; nop; nop; nop;\n\t" + "li\t%0, 0x1\n\t" + "dsll\t%0, 31\n\t" + "lui\t%1, 0x9000\n\t" + "dsll32\t%1, 0\n\t" + "or\t%0, %1, %0\n\t" + "sb\t$0, 0(%0)\n\t" + "mtc0\t$0, $12\n\t" + "nop; nop; nop; nop;\n\t" + "mtc0\t%2, $12\n\t" + "nop; nop; nop; nop;\n\t" + ".set\tpop" + : "=r" (tmp1), "=r" (tmp2), "=r" (addr)); +} + +static void indy_sc_disable(void) +{ + unsigned long tmp1, tmp2, tmp3; + +#ifdef DEBUG_CACHE + printk("Disabling R4600 SCACHE\n"); +#endif + __asm__ __volatile__( + ".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set\tmips3\n\t" + "li\t%0, 0x1\n\t" + "dsll\t%0, 31\n\t" + "lui\t%1, 0x9000\n\t" + "dsll32\t%1, 0\n\t" + "or\t%0, %1, %0\n\t" + "mfc0\t%2, $12\n\t" + "nop; nop; nop; nop\n\t" + "li\t%1, 0x80\n\t" + "mtc0\t%1, $12\n\t" + "nop; nop; nop; nop\n\t" + "sh\t$0, 0(%0)\n\t" + "mtc0\t$0, $12\n\t" + "nop; nop; nop; nop\n\t" + "mtc0\t%2, $12\n\t" + "nop; nop; nop; nop\n\t" + ".set\tpop" + : "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)); +} + +static inline int __init indy_sc_probe(void) +{ + unsigned int size = ip22_eeprom_read(&sgimc->eeprom, 17); + if (size == 0) + return 0; + + size <<= PAGE_SHIFT; + printk(KERN_INFO "R4600/R5000 SCACHE size %dK, linesize 32 bytes.\n", + size >> 10); + scache_size = size; + + return 1; +} + +/* XXX Check with wje if the Indy caches can differentiate between + writeback + invalidate and just invalidate. */ +static struct bcache_ops indy_sc_ops = { + .bc_enable = indy_sc_enable, + .bc_disable = indy_sc_disable, + .bc_wback_inv = indy_sc_wback_invalidate, + .bc_inv = indy_sc_wback_invalidate +}; + +void indy_sc_init(void) +{ + if (indy_sc_probe()) { + indy_sc_enable(); + bcops = &indy_sc_ops; + } +} -- cgit v1.2.3