From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/mips/pci/msi-octeon.c | 414 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 414 insertions(+) create mode 100644 arch/mips/pci/msi-octeon.c (limited to 'arch/mips/pci/msi-octeon.c') diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c new file mode 100644 index 000000000..abc3b61bf --- /dev/null +++ b/arch/mips/pci/msi-octeon.c @@ -0,0 +1,414 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2009, 2010 Cavium Networks + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +/* + * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is + * in use. + */ +static u64 msi_free_irq_bitmask[4]; + +/* + * Each bit in msi_multiple_irq_bitmask tells that the device using + * this bit in msi_free_irq_bitmask is also using the next bit. This + * is used so we can disable all of the MSI interrupts when a device + * uses multiple. + */ +static u64 msi_multiple_irq_bitmask[4]; + +/* + * This lock controls updates to msi_free_irq_bitmask and + * msi_multiple_irq_bitmask. + */ +static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock); + +/* + * Number of MSI IRQs used. This variable is set up in + * the module init time. + */ +static int msi_irq_size; + +/** + * arch_setup_msi_irq() - setup MSI IRQs for a device + * @dev: Device requesting MSI interrupts + * @desc: MSI descriptor + * + * Called when a driver requests MSI interrupts instead of the + * legacy INT A-D. This routine will allocate multiple interrupts + * for MSI devices that support them. A device can override this by + * programming the MSI control bits [6:4] before calling + * pci_enable_msi(). + * + * Return: %0 on success, non-%0 on error. + */ +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ + struct msi_msg msg; + u16 control; + int configured_private_bits; + int request_private_bits; + int irq = 0; + int irq_step; + u64 search_mask; + int index; + + if (desc->pci.msi_attrib.is_msix) + return -EINVAL; + + /* + * Read the MSI config to figure out how many IRQs this device + * wants. Most devices only want 1, which will give + * configured_private_bits and request_private_bits equal 0. + */ + pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control); + + /* + * If the number of private bits has been configured then use + * that value instead of the requested number. This gives the + * driver the chance to override the number of interrupts + * before calling pci_enable_msi(). + */ + configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; + if (configured_private_bits == 0) { + /* Nothing is configured, so use the hardware requested size */ + request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; + } else { + /* + * Use the number of configured bits, assuming the + * driver wanted to override the hardware request + * value. + */ + request_private_bits = configured_private_bits; + } + + /* + * The PCI 2.3 spec mandates that there are at most 32 + * interrupts. If this device asks for more, only give it one. + */ + if (request_private_bits > 5) + request_private_bits = 0; + +try_only_one: + /* + * The IRQs have to be aligned on a power of two based on the + * number being requested. + */ + irq_step = 1 << request_private_bits; + + /* Mask with one bit for each IRQ */ + search_mask = (1 << irq_step) - 1; + + /* + * We're going to search msi_free_irq_bitmask_lock for zero + * bits. This represents an MSI interrupt number that isn't in + * use. + */ + spin_lock(&msi_free_irq_bitmask_lock); + for (index = 0; index < msi_irq_size/64; index++) { + for (irq = 0; irq < 64; irq += irq_step) { + if ((msi_free_irq_bitmask[index] & (search_mask << irq)) == 0) { + msi_free_irq_bitmask[index] |= search_mask << irq; + msi_multiple_irq_bitmask[index] |= (search_mask >> 1) << irq; + goto msi_irq_allocated; + } + } + } +msi_irq_allocated: + spin_unlock(&msi_free_irq_bitmask_lock); + + /* Make sure the search for available interrupts didn't fail */ + if (irq >= 64) { + if (request_private_bits) { + pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one", + 1 << request_private_bits); + request_private_bits = 0; + goto try_only_one; + } else + panic("arch_setup_msi_irq: Unable to find a free MSI interrupt"); + } + + /* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */ + irq += index*64; + irq += OCTEON_IRQ_MSI_BIT0; + + switch (octeon_dma_bar_type) { + case OCTEON_DMA_BAR_TYPE_SMALL: + /* When not using big bar, Bar 0 is based at 128MB */ + msg.address_lo = + ((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff; + msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32; + break; + case OCTEON_DMA_BAR_TYPE_BIG: + /* When using big bar, Bar 0 is based at 0 */ + msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff; + msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32; + break; + case OCTEON_DMA_BAR_TYPE_PCIE: + /* When using PCIe, Bar 0 is based at 0 */ + /* FIXME CVMX_NPEI_MSI_RCV* other than 0? */ + msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff; + msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32; + break; + case OCTEON_DMA_BAR_TYPE_PCIE2: + /* When using PCIe2, Bar 0 is based at 0 */ + msg.address_lo = (0 + CVMX_SLI_PCIE_MSI_RCV) & 0xffffffff; + msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32; + break; + default: + panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type"); + } + msg.data = irq - OCTEON_IRQ_MSI_BIT0; + + /* Update the number of IRQs the device has available to it */ + control &= ~PCI_MSI_FLAGS_QSIZE; + control |= request_private_bits << 4; + pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control); + + irq_set_msi_desc(irq, desc); + pci_write_msi_msg(irq, &msg); + return 0; +} + +/** + * arch_teardown_msi_irq() - release MSI IRQs for a device + * @irq: The devices first irq number. There may be multiple in sequence. + * + * Called when a device no longer needs its MSI interrupts. All + * MSI interrupts for the device are freed. + */ +void arch_teardown_msi_irq(unsigned int irq) +{ + int number_irqs; + u64 bitmask; + int index = 0; + int irq0; + + if ((irq < OCTEON_IRQ_MSI_BIT0) + || (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0)) + panic("arch_teardown_msi_irq: Attempted to teardown illegal " + "MSI interrupt (%d)", irq); + + irq -= OCTEON_IRQ_MSI_BIT0; + index = irq / 64; + irq0 = irq % 64; + + /* + * Count the number of IRQs we need to free by looking at the + * msi_multiple_irq_bitmask. Each bit set means that the next + * IRQ is also owned by this device. + */ + number_irqs = 0; + while ((irq0 + number_irqs < 64) && + (msi_multiple_irq_bitmask[index] + & (1ull << (irq0 + number_irqs)))) + number_irqs++; + number_irqs++; + /* Mask with one bit for each IRQ */ + bitmask = (1 << number_irqs) - 1; + /* Shift the mask to the correct bit location */ + bitmask <<= irq0; + if ((msi_free_irq_bitmask[index] & bitmask) != bitmask) + panic("arch_teardown_msi_irq: Attempted to teardown MSI " + "interrupt (%d) not in use", irq); + + /* Checks are done, update the in use bitmask */ + spin_lock(&msi_free_irq_bitmask_lock); + msi_free_irq_bitmask[index] &= ~bitmask; + msi_multiple_irq_bitmask[index] &= ~bitmask; + spin_unlock(&msi_free_irq_bitmask_lock); +} + +static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock); + +static u64 msi_rcv_reg[4]; +static u64 mis_ena_reg[4]; + +static void octeon_irq_msi_enable_pcie(struct irq_data *data) +{ + u64 en; + unsigned long flags; + int msi_number = data->irq - OCTEON_IRQ_MSI_BIT0; + int irq_index = msi_number >> 6; + int irq_bit = msi_number & 0x3f; + + raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags); + en = cvmx_read_csr(mis_ena_reg[irq_index]); + en |= 1ull << irq_bit; + cvmx_write_csr(mis_ena_reg[irq_index], en); + cvmx_read_csr(mis_ena_reg[irq_index]); + raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags); +} + +static void octeon_irq_msi_disable_pcie(struct irq_data *data) +{ + u64 en; + unsigned long flags; + int msi_number = data->irq - OCTEON_IRQ_MSI_BIT0; + int irq_index = msi_number >> 6; + int irq_bit = msi_number & 0x3f; + + raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags); + en = cvmx_read_csr(mis_ena_reg[irq_index]); + en &= ~(1ull << irq_bit); + cvmx_write_csr(mis_ena_reg[irq_index], en); + cvmx_read_csr(mis_ena_reg[irq_index]); + raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags); +} + +static struct irq_chip octeon_irq_chip_msi_pcie = { + .name = "MSI", + .irq_enable = octeon_irq_msi_enable_pcie, + .irq_disable = octeon_irq_msi_disable_pcie, +}; + +static void octeon_irq_msi_enable_pci(struct irq_data *data) +{ + /* + * Octeon PCI doesn't have the ability to mask/unmask MSI + * interrupts individually. Instead of masking/unmasking them + * in groups of 16, we simple assume MSI devices are well + * behaved. MSI interrupts are always enable and the ACK is + * assumed to be enough + */ +} + +static void octeon_irq_msi_disable_pci(struct irq_data *data) +{ + /* See comment in enable */ +} + +static struct irq_chip octeon_irq_chip_msi_pci = { + .name = "MSI", + .irq_enable = octeon_irq_msi_enable_pci, + .irq_disable = octeon_irq_msi_disable_pci, +}; + +/* + * Called by the interrupt handling code when an MSI interrupt + * occurs. + */ +static irqreturn_t __octeon_msi_do_interrupt(int index, u64 msi_bits) +{ + int irq; + int bit; + + bit = fls64(msi_bits); + if (bit) { + bit--; + /* Acknowledge it first. */ + cvmx_write_csr(msi_rcv_reg[index], 1ull << bit); + + irq = bit + OCTEON_IRQ_MSI_BIT0 + 64 * index; + do_IRQ(irq); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +#define OCTEON_MSI_INT_HANDLER_X(x) \ +static irqreturn_t octeon_msi_interrupt##x(int cpl, void *dev_id) \ +{ \ + u64 msi_bits = cvmx_read_csr(msi_rcv_reg[(x)]); \ + return __octeon_msi_do_interrupt((x), msi_bits); \ +} + +/* + * Create octeon_msi_interrupt{0-3} function body + */ +OCTEON_MSI_INT_HANDLER_X(0); +OCTEON_MSI_INT_HANDLER_X(1); +OCTEON_MSI_INT_HANDLER_X(2); +OCTEON_MSI_INT_HANDLER_X(3); + +/* + * Initializes the MSI interrupt handling code + */ +int __init octeon_msi_initialize(void) +{ + int irq; + struct irq_chip *msi; + + if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_INVALID) { + return 0; + } else if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) { + msi_rcv_reg[0] = CVMX_PEXP_NPEI_MSI_RCV0; + msi_rcv_reg[1] = CVMX_PEXP_NPEI_MSI_RCV1; + msi_rcv_reg[2] = CVMX_PEXP_NPEI_MSI_RCV2; + msi_rcv_reg[3] = CVMX_PEXP_NPEI_MSI_RCV3; + mis_ena_reg[0] = CVMX_PEXP_NPEI_MSI_ENB0; + mis_ena_reg[1] = CVMX_PEXP_NPEI_MSI_ENB1; + mis_ena_reg[2] = CVMX_PEXP_NPEI_MSI_ENB2; + mis_ena_reg[3] = CVMX_PEXP_NPEI_MSI_ENB3; + msi = &octeon_irq_chip_msi_pcie; + } else { + msi_rcv_reg[0] = CVMX_NPI_NPI_MSI_RCV; +#define INVALID_GENERATE_ADE 0x8700000000000000ULL; + msi_rcv_reg[1] = INVALID_GENERATE_ADE; + msi_rcv_reg[2] = INVALID_GENERATE_ADE; + msi_rcv_reg[3] = INVALID_GENERATE_ADE; + mis_ena_reg[0] = INVALID_GENERATE_ADE; + mis_ena_reg[1] = INVALID_GENERATE_ADE; + mis_ena_reg[2] = INVALID_GENERATE_ADE; + mis_ena_reg[3] = INVALID_GENERATE_ADE; + msi = &octeon_irq_chip_msi_pci; + } + + for (irq = OCTEON_IRQ_MSI_BIT0; irq <= OCTEON_IRQ_MSI_LAST; irq++) + irq_set_chip_and_handler(irq, msi, handle_simple_irq); + + if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { + if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt0, + 0, "MSI[0:63]", octeon_msi_interrupt0)) + panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt1, + 0, "MSI[64:127]", octeon_msi_interrupt1)) + panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt2, + 0, "MSI[127:191]", octeon_msi_interrupt2)) + panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt3, + 0, "MSI[192:255]", octeon_msi_interrupt3)) + panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed"); + + msi_irq_size = 256; + } else if (octeon_is_pci_host()) { + if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt0, + 0, "MSI[0:15]", octeon_msi_interrupt0)) + panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt0, + 0, "MSI[16:31]", octeon_msi_interrupt0)) + panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt0, + 0, "MSI[32:47]", octeon_msi_interrupt0)) + panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt0, + 0, "MSI[48:63]", octeon_msi_interrupt0)) + panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed"); + msi_irq_size = 64; + } + return 0; +} +subsys_initcall(octeon_msi_initialize); -- cgit v1.2.3