From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/mips/tools/loongson3-llsc-check.c | 309 +++++++++++++++++++++++++++++++++ 1 file changed, 309 insertions(+) create mode 100644 arch/mips/tools/loongson3-llsc-check.c (limited to 'arch/mips/tools/loongson3-llsc-check.c') diff --git a/arch/mips/tools/loongson3-llsc-check.c b/arch/mips/tools/loongson3-llsc-check.c new file mode 100644 index 000000000..5f68a4fa8 --- /dev/null +++ b/arch/mips/tools/loongson3-llsc-check.c @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef be32toh +/* If libc provides le{16,32,64}toh() then we'll use them */ +#elif BYTE_ORDER == LITTLE_ENDIAN +# define le16toh(x) (x) +# define le32toh(x) (x) +# define le64toh(x) (x) +#elif BYTE_ORDER == BIG_ENDIAN +# define le16toh(x) bswap_16(x) +# define le32toh(x) bswap_32(x) +# define le64toh(x) bswap_64(x) +#endif + +/* MIPS opcodes, in bits 31:26 of an instruction */ +#define OP_SPECIAL 0x00 +#define OP_REGIMM 0x01 +#define OP_BEQ 0x04 +#define OP_BNE 0x05 +#define OP_BLEZ 0x06 +#define OP_BGTZ 0x07 +#define OP_BEQL 0x14 +#define OP_BNEL 0x15 +#define OP_BLEZL 0x16 +#define OP_BGTZL 0x17 +#define OP_LL 0x30 +#define OP_LLD 0x34 +#define OP_SC 0x38 +#define OP_SCD 0x3c + +/* Bits 20:16 of OP_REGIMM instructions */ +#define REGIMM_BLTZ 0x00 +#define REGIMM_BGEZ 0x01 +#define REGIMM_BLTZL 0x02 +#define REGIMM_BGEZL 0x03 +#define REGIMM_BLTZAL 0x10 +#define REGIMM_BGEZAL 0x11 +#define REGIMM_BLTZALL 0x12 +#define REGIMM_BGEZALL 0x13 + +/* Bits 5:0 of OP_SPECIAL instructions */ +#define SPECIAL_SYNC 0x0f + +static void usage(FILE *f) +{ + fprintf(f, "Usage: loongson3-llsc-check /path/to/vmlinux\n"); +} + +static int se16(uint16_t x) +{ + return (int16_t)x; +} + +static bool is_ll(uint32_t insn) +{ + switch (insn >> 26) { + case OP_LL: + case OP_LLD: + return true; + + default: + return false; + } +} + +static bool is_sc(uint32_t insn) +{ + switch (insn >> 26) { + case OP_SC: + case OP_SCD: + return true; + + default: + return false; + } +} + +static bool is_sync(uint32_t insn) +{ + /* Bits 31:11 should all be zeroes */ + if (insn >> 11) + return false; + + /* Bits 5:0 specify the SYNC special encoding */ + if ((insn & 0x3f) != SPECIAL_SYNC) + return false; + + return true; +} + +static bool is_branch(uint32_t insn, int *off) +{ + switch (insn >> 26) { + case OP_BEQ: + case OP_BEQL: + case OP_BNE: + case OP_BNEL: + case OP_BGTZ: + case OP_BGTZL: + case OP_BLEZ: + case OP_BLEZL: + *off = se16(insn) + 1; + return true; + + case OP_REGIMM: + switch ((insn >> 16) & 0x1f) { + case REGIMM_BGEZ: + case REGIMM_BGEZL: + case REGIMM_BGEZAL: + case REGIMM_BGEZALL: + case REGIMM_BLTZ: + case REGIMM_BLTZL: + case REGIMM_BLTZAL: + case REGIMM_BLTZALL: + *off = se16(insn) + 1; + return true; + + default: + return false; + } + + default: + return false; + } +} + +static int check_ll(uint64_t pc, uint32_t *code, size_t sz) +{ + ssize_t i, max, sc_pos; + int off; + + /* + * Every LL must be preceded by a sync instruction in order to ensure + * that instruction reordering doesn't allow a prior memory access to + * execute after the LL & cause erroneous results. + */ + if (!is_sync(le32toh(code[-1]))) { + fprintf(stderr, "%" PRIx64 ": LL not preceded by sync\n", pc); + return -EINVAL; + } + + /* Find the matching SC instruction */ + max = sz / 4; + for (sc_pos = 0; sc_pos < max; sc_pos++) { + if (is_sc(le32toh(code[sc_pos]))) + break; + } + if (sc_pos >= max) { + fprintf(stderr, "%" PRIx64 ": LL has no matching SC\n", pc); + return -EINVAL; + } + + /* + * Check branches within the LL/SC loop target sync instructions, + * ensuring that speculative execution can't generate memory accesses + * due to instructions outside of the loop. + */ + for (i = 0; i < sc_pos; i++) { + if (!is_branch(le32toh(code[i]), &off)) + continue; + + /* + * If the branch target is within the LL/SC loop then we don't + * need to worry about it. + */ + if ((off >= -i) && (off <= sc_pos)) + continue; + + /* If the branch targets a sync instruction we're all good... */ + if (is_sync(le32toh(code[i + off]))) + continue; + + /* ...but if not, we have a problem */ + fprintf(stderr, "%" PRIx64 ": Branch target not a sync\n", + pc + (i * 4)); + return -EINVAL; + } + + return 0; +} + +static int check_code(uint64_t pc, uint32_t *code, size_t sz) +{ + int err = 0; + + if (sz % 4) { + fprintf(stderr, "%" PRIx64 ": Section size not a multiple of 4\n", + pc); + err = -EINVAL; + sz -= (sz % 4); + } + + if (is_ll(le32toh(code[0]))) { + fprintf(stderr, "%" PRIx64 ": First instruction in section is an LL\n", + pc); + err = -EINVAL; + } + +#define advance() ( \ + code++, \ + pc += 4, \ + sz -= 4 \ +) + + /* + * Skip the first instruction, allowing check_ll to look backwards + * unconditionally. + */ + advance(); + + /* Now scan through the code looking for LL instructions */ + for (; sz; advance()) { + if (is_ll(le32toh(code[0]))) + err |= check_ll(pc, code, sz); + } + + return err; +} + +int main(int argc, char *argv[]) +{ + int vmlinux_fd, status, err, i; + const char *vmlinux_path; + struct stat st; + Elf64_Ehdr *eh; + Elf64_Shdr *sh; + void *vmlinux; + + status = EXIT_FAILURE; + + if (argc < 2) { + usage(stderr); + goto out_ret; + } + + vmlinux_path = argv[1]; + vmlinux_fd = open(vmlinux_path, O_RDONLY); + if (vmlinux_fd == -1) { + perror("Unable to open vmlinux"); + goto out_ret; + } + + err = fstat(vmlinux_fd, &st); + if (err) { + perror("Unable to stat vmlinux"); + goto out_close; + } + + vmlinux = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, vmlinux_fd, 0); + if (vmlinux == MAP_FAILED) { + perror("Unable to mmap vmlinux"); + goto out_close; + } + + eh = vmlinux; + if (memcmp(eh->e_ident, ELFMAG, SELFMAG)) { + fprintf(stderr, "vmlinux is not an ELF?\n"); + goto out_munmap; + } + + if (eh->e_ident[EI_CLASS] != ELFCLASS64) { + fprintf(stderr, "vmlinux is not 64b?\n"); + goto out_munmap; + } + + if (eh->e_ident[EI_DATA] != ELFDATA2LSB) { + fprintf(stderr, "vmlinux is not little endian?\n"); + goto out_munmap; + } + + for (i = 0; i < le16toh(eh->e_shnum); i++) { + sh = vmlinux + le64toh(eh->e_shoff) + (i * le16toh(eh->e_shentsize)); + + if (sh->sh_type != SHT_PROGBITS) + continue; + if (!(sh->sh_flags & SHF_EXECINSTR)) + continue; + + err = check_code(le64toh(sh->sh_addr), + vmlinux + le64toh(sh->sh_offset), + le64toh(sh->sh_size)); + if (err) + goto out_munmap; + } + + status = EXIT_SUCCESS; +out_munmap: + munmap(vmlinux, st.st_size); +out_close: + close(vmlinux_fd); +out_ret: + fprintf(stdout, "loongson3-llsc-check returns %s\n", + status ? "failure" : "success"); + return status; +} -- cgit v1.2.3