From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/mips/txx9/rbtx4927/Makefile | 2 + arch/mips/txx9/rbtx4927/irq.c | 198 ++++++++++++++++++++ arch/mips/txx9/rbtx4927/prom.c | 42 +++++ arch/mips/txx9/rbtx4927/setup.c | 380 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 622 insertions(+) create mode 100644 arch/mips/txx9/rbtx4927/Makefile create mode 100644 arch/mips/txx9/rbtx4927/irq.c create mode 100644 arch/mips/txx9/rbtx4927/prom.c create mode 100644 arch/mips/txx9/rbtx4927/setup.c (limited to 'arch/mips/txx9/rbtx4927') diff --git a/arch/mips/txx9/rbtx4927/Makefile b/arch/mips/txx9/rbtx4927/Makefile new file mode 100644 index 000000000..08a02aebd --- /dev/null +++ b/arch/mips/txx9/rbtx4927/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-y += prom.o setup.o irq.o diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c new file mode 100644 index 000000000..3f48292c9 --- /dev/null +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -0,0 +1,198 @@ +/* + * Toshiba RBTX4927 specific interrupt handlers + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +/* + * I8259A_IRQ_BASE+00 + * I8259A_IRQ_BASE+01 PS2/Keyboard + * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15) + * I8259A_IRQ_BASE+03 + * I8259A_IRQ_BASE+04 + * I8259A_IRQ_BASE+05 + * I8259A_IRQ_BASE+06 + * I8259A_IRQ_BASE+07 + * I8259A_IRQ_BASE+08 + * I8259A_IRQ_BASE+09 + * I8259A_IRQ_BASE+10 + * I8259A_IRQ_BASE+11 + * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time) + * I8259A_IRQ_BASE+13 + * I8259A_IRQ_BASE+14 IDE + * I8259A_IRQ_BASE+15 + * + * MIPS_CPU_IRQ_BASE+00 Software 0 + * MIPS_CPU_IRQ_BASE+01 Software 1 + * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0 + * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+07 CPU TIMER + * + * TXX9_IRQ_BASE+00 + * TXX9_IRQ_BASE+01 + * TXX9_IRQ_BASE+02 + * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC + * TXX9_IRQ_BASE+04 + * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet + * TXX9_IRQ_BASE+06 + * TXX9_IRQ_BASE+07 + * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0 + * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1 + * TXX9_IRQ_BASE+10 + * TXX9_IRQ_BASE+11 + * TXX9_IRQ_BASE+12 + * TXX9_IRQ_BASE+13 + * TXX9_IRQ_BASE+14 + * TXX9_IRQ_BASE+15 + * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C + * TXX9_IRQ_BASE+17 + * TXX9_IRQ_BASE+18 + * TXX9_IRQ_BASE+19 + * TXX9_IRQ_BASE+20 + * TXX9_IRQ_BASE+21 + * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR + * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used) + * TXX9_IRQ_BASE+24 + * TXX9_IRQ_BASE+25 + * TXX9_IRQ_BASE+26 + * TXX9_IRQ_BASE+27 + * TXX9_IRQ_BASE+28 + * TXX9_IRQ_BASE+29 + * TXX9_IRQ_BASE+30 + * TXX9_IRQ_BASE+31 + * + * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge) + * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge) + * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR) + * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4) + * RBTX4927_IRQ_IOC+04 + * RBTX4927_IRQ_IOC+05 + * RBTX4927_IRQ_IOC+06 + * RBTX4927_IRQ_IOC+07 + * + * NOTES: + * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 + * SouthBridge/ISA/pin=0 no pci irq used by this device + * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR + * via ISA IRQ14 + * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 + * SouthBridge/PMC/pin=0 no pci irq used by this device + * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 + * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) + * JP7 is not bus master -- do NOT use -- only 4 pci bus master's + * allowed -- SouthBridge, JP4, JP5, JP6 + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static int toshiba_rbtx4927_irq_nested(int sw_irq) +{ + u8 level3; + + level3 = readb(rbtx4927_imstat_addr) & 0x1f; + if (unlikely(!level3)) + return -1; + return RBTX4927_IRQ_IOC + __fls8(level3); +} + +static void toshiba_rbtx4927_irq_ioc_enable(struct irq_data *d) +{ + unsigned char v; + + v = readb(rbtx4927_imask_addr); + v |= (1 << (d->irq - RBTX4927_IRQ_IOC)); + writeb(v, rbtx4927_imask_addr); +} + +static void toshiba_rbtx4927_irq_ioc_disable(struct irq_data *d) +{ + unsigned char v; + + v = readb(rbtx4927_imask_addr); + v &= ~(1 << (d->irq - RBTX4927_IRQ_IOC)); + writeb(v, rbtx4927_imask_addr); + mmiowb(); +} + +#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC" +static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { + .name = TOSHIBA_RBTX4927_IOC_NAME, + .irq_mask = toshiba_rbtx4927_irq_ioc_disable, + .irq_unmask = toshiba_rbtx4927_irq_ioc_enable, +}; + +static void __init toshiba_rbtx4927_irq_ioc_init(void) +{ + int i; + + /* mask all IOC interrupts */ + writeb(0, rbtx4927_imask_addr); + /* clear SoftInt interrupts */ + writeb(0, rbtx4927_softint_addr); + + for (i = RBTX4927_IRQ_IOC; + i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++) + irq_set_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, + handle_level_irq); + irq_set_chained_handler(RBTX4927_IRQ_IOCINT, handle_simple_irq); +} + +static int rbtx4927_irq_dispatch(int pending) +{ + int irq; + + if (pending & STATUSF_IP7) /* cpu timer */ + irq = MIPS_CPU_IRQ_BASE + 7; + else if (pending & STATUSF_IP2) { /* tx4927 pic */ + irq = txx9_irq(); + if (irq == RBTX4927_IRQ_IOCINT) + irq = toshiba_rbtx4927_irq_nested(irq); + } else if (pending & STATUSF_IP0) /* user line 0 */ + irq = MIPS_CPU_IRQ_BASE + 0; + else if (pending & STATUSF_IP1) /* user line 1 */ + irq = MIPS_CPU_IRQ_BASE + 1; + else + irq = -1; + return irq; +} + +void __init rbtx4927_irq_setup(void) +{ + txx9_irq_dispatch = rbtx4927_irq_dispatch; + tx4927_irq_init(); + toshiba_rbtx4927_irq_ioc_init(); + /* Onboard 10M Ether: High Active */ + irq_set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); +} diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c new file mode 100644 index 000000000..9b4acff82 --- /dev/null +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -0,0 +1,42 @@ +/* + * rbtx4927 specific prom routines + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * Copyright (C) 2004 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +void __init rbtx4927_prom_init(void) +{ + memblock_add(0, tx4927_get_mem_size()); + txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL); +} diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c new file mode 100644 index 000000000..31955c1d5 --- /dev/null +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -0,0 +1,380 @@ +/* + * Toshiba rbtx4927 specific setup + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2000 RidgeRun, Inc. + * Author: RidgeRun, Inc. + * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com + * + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2002 MontaVista Software Inc. + * Author: Michael Pruznick, michael_pruznick@mvista.com + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * Copyright (C) 2004 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for TX4937 */ + +#ifdef CONFIG_PCI +static void __init tx4927_pci_setup(void) +{ + int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; + + register_pci_controller(c); + + if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) + txx9_pci_option = + (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | + TXX9_PCI_OPT_CLK_66; /* already configured */ + + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_66) + tx4927_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + + tx4927_report_pciclk(); + tx4927_pcic_setup(tx4927_pcicptr, c, extarb); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_AUTO && + txx9_pci66_check(c, 0, 0)) { + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + tx4927_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + /* Reinitialize PCIC */ + tx4927_report_pciclk(); + tx4927_pcic_setup(tx4927_pcicptr, c, extarb); + } + tx4927_setup_pcierr_irq(); +} + +static void __init tx4937_pci_setup(void) +{ + int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; + + register_pci_controller(c); + + if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) + txx9_pci_option = + (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | + TXX9_PCI_OPT_CLK_66; /* already configured */ + + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_66) + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + + tx4938_report_pciclk(); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_AUTO && + txx9_pci66_check(c, 0, 0)) { + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + /* Reinitialize PCIC */ + tx4938_report_pciclk(); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); + } + tx4938_setup_pcierr_irq(); +} +#else +static inline void tx4927_pci_setup(void) {} +static inline void tx4937_pci_setup(void) {} +#endif /* CONFIG_PCI */ + +static void __init rbtx4927_gpio_init(void) +{ + /* TX4927-SIO DTR on (PIO[15]) */ + gpio_request(15, "sio-dtr"); + gpio_direction_output(15, 1); + + tx4927_sio_init(0, 0); +} + +static void __init rbtx4927_arch_init(void) +{ + txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO); + + rbtx4927_gpio_init(); + + tx4927_pci_setup(); +} + +static void __init rbtx4937_arch_init(void) +{ + txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO); + + rbtx4927_gpio_init(); + + tx4937_pci_setup(); +} + +static void toshiba_rbtx4927_restart(char *command) +{ + /* enable the s/w reset register */ + writeb(1, rbtx4927_softresetlock_addr); + + /* wait for enable to be seen */ + while (!(readb(rbtx4927_softresetlock_addr) & 1)) + ; + + /* do a s/w reset */ + writeb(1, rbtx4927_softreset_addr); + + /* fallback */ + (*_machine_halt)(); +} + +static void __init rbtx4927_clock_init(void); +static void __init rbtx4937_clock_init(void); + +static void __init rbtx4927_mem_setup(void) +{ + if (TX4927_REV_PCODE() == 0x4927) { + rbtx4927_clock_init(); + tx4927_setup(); + } else { + rbtx4937_clock_init(); + tx4938_setup(); + } + + _machine_restart = toshiba_rbtx4927_restart; + +#ifdef CONFIG_PCI + txx9_alloc_pci_controller(&txx9_primary_pcic, + RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE, + RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE); + txx9_board_pcibios_setup = tx4927_pcibios_setup; +#else + set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); +#endif +} + +static void __init rbtx4927_clock_init(void) +{ + /* + * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. + * + * For TX4927: + * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). + * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) + * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) + * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) + * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) + * i.e. S9[3]: ON (83MHz), OFF (100MHz) + */ + switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & + TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + case TX4927_CCFG_PCIDIVMODE_5: + txx9_cpu_clock = 166666666; /* 166MHz */ + break; + default: + txx9_cpu_clock = 200000000; /* 200MHz */ + } +} + +static void __init rbtx4937_clock_init(void) +{ + /* + * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. + * + * For TX4937: + * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) + * PCIDIVMODE[10] is 0. + * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) + * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) + * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) + * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) + * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) + * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) + */ + switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & + TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + txx9_cpu_clock = 266666666; /* 266MHz */ + break; + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + txx9_cpu_clock = 300000000; /* 300MHz */ + break; + default: + txx9_cpu_clock = 333333333; /* 333MHz */ + } +} + +static void __init rbtx4927_time_init(void) +{ + tx4927_time_init(0); +} + +static void __init toshiba_rbtx4927_rtc_init(void) +{ + struct resource res = { + .start = RBTX4927_BRAMRTC_BASE - IO_BASE, + .end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1, + .flags = IORESOURCE_MEM, + }; + platform_device_register_simple("rtc-ds1742", -1, &res, 1); +} + +static void __init rbtx4927_ne_init(void) +{ + struct resource res[] = { + { + .start = RBTX4927_RTL_8019_BASE, + .end = RBTX4927_RTL_8019_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, { + .start = RBTX4927_RTL_8019_IRQ, + .flags = IORESOURCE_IRQ, + } + }; + platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); +} + +static void __init rbtx4927_mtd_init(void) +{ + int i; + + for (i = 0; i < 2; i++) + tx4927_mtd_init(i); +} + +static void __init rbtx4927_gpioled_init(void) +{ + static const struct gpio_led leds[] = { + { .name = "gpioled:green:0", .gpio = 0, .active_low = 1, }, + { .name = "gpioled:green:1", .gpio = 1, .active_low = 1, }, + }; + static struct gpio_led_platform_data pdata = { + .num_leds = ARRAY_SIZE(leds), + .leds = leds, + }; + struct platform_device *pdev = platform_device_alloc("leds-gpio", 0); + + if (!pdev) + return; + pdev->dev.platform_data = &pdata; + if (platform_device_add(pdev)) + platform_device_put(pdev); +} + +static void __init rbtx4927_device_init(void) +{ + toshiba_rbtx4927_rtc_init(); + rbtx4927_ne_init(); + tx4927_wdt_init(); + rbtx4927_mtd_init(); + if (TX4927_REV_PCODE() == 0x4927) { + tx4927_dmac_init(2); + tx4927_aclc_init(0, 1); + } else { + tx4938_dmac_init(0, 2); + tx4938_aclc_init(); + } + platform_device_register_simple("txx9aclc-generic", -1, NULL, 0); + txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL); + rbtx4927_gpioled_init(); +} + +struct txx9_board_vec rbtx4927_vec __initdata = { + .system = "Toshiba RBTX4927", + .prom_init = rbtx4927_prom_init, + .mem_setup = rbtx4927_mem_setup, + .irq_setup = rbtx4927_irq_setup, + .time_init = rbtx4927_time_init, + .device_init = rbtx4927_device_init, + .arch_init = rbtx4927_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = rbtx4927_pci_map_irq, +#endif +}; +struct txx9_board_vec rbtx4937_vec __initdata = { + .system = "Toshiba RBTX4937", + .prom_init = rbtx4927_prom_init, + .mem_setup = rbtx4927_mem_setup, + .irq_setup = rbtx4927_irq_setup, + .time_init = rbtx4927_time_init, + .device_init = rbtx4927_device_init, + .arch_init = rbtx4937_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = rbtx4927_pci_map_irq, +#endif +}; -- cgit v1.2.3