From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/nios2/kernel/cpuinfo.c | 195 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 arch/nios2/kernel/cpuinfo.c (limited to 'arch/nios2/kernel/cpuinfo.c') diff --git a/arch/nios2/kernel/cpuinfo.c b/arch/nios2/kernel/cpuinfo.c new file mode 100644 index 000000000..203870c4b --- /dev/null +++ b/arch/nios2/kernel/cpuinfo.c @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2013 Altera Corporation + * Copyright (C) 2011 Tobias Klauser + * + * Based on cpuinfo.c from microblaze + */ + +#include +#include +#include +#include +#include +#include +#include + +struct cpuinfo cpuinfo; + +#define err_cpu(x) \ + pr_err("ERROR: Nios II " x " different for kernel and DTS\n") + +static inline u32 fcpu(struct device_node *cpu, const char *n) +{ + u32 val = 0; + + of_property_read_u32(cpu, n, &val); + + return val; +} + +void __init setup_cpuinfo(void) +{ + struct device_node *cpu; + const char *str; + int len; + + cpu = of_get_cpu_node(0, NULL); + if (!cpu) + panic("%s: No CPU found in devicetree!\n", __func__); + + if (!of_property_read_bool(cpu, "altr,has-initda")) + panic("initda instruction is unimplemented. Please update your " + "hardware system to have more than 4-byte line data " + "cache\n"); + + cpuinfo.cpu_clock_freq = fcpu(cpu, "clock-frequency"); + + str = of_get_property(cpu, "altr,implementation", &len); + if (str) + strlcpy(cpuinfo.cpu_impl, str, sizeof(cpuinfo.cpu_impl)); + else + strcpy(cpuinfo.cpu_impl, ""); + + cpuinfo.has_div = of_property_read_bool(cpu, "altr,has-div"); + cpuinfo.has_mul = of_property_read_bool(cpu, "altr,has-mul"); + cpuinfo.has_mulx = of_property_read_bool(cpu, "altr,has-mulx"); + cpuinfo.has_bmx = of_property_read_bool(cpu, "altr,has-bmx"); + cpuinfo.has_cdx = of_property_read_bool(cpu, "altr,has-cdx"); + cpuinfo.mmu = of_property_read_bool(cpu, "altr,has-mmu"); + + if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div) + err_cpu("DIV"); + + if (IS_ENABLED(CONFIG_NIOS2_HW_MUL_SUPPORT) && !cpuinfo.has_mul) + err_cpu("MUL"); + + if (IS_ENABLED(CONFIG_NIOS2_HW_MULX_SUPPORT) && !cpuinfo.has_mulx) + err_cpu("MULX"); + + if (IS_ENABLED(CONFIG_NIOS2_BMX_SUPPORT) && !cpuinfo.has_bmx) + err_cpu("BMX"); + + if (IS_ENABLED(CONFIG_NIOS2_CDX_SUPPORT) && !cpuinfo.has_cdx) + err_cpu("CDX"); + + cpuinfo.tlb_num_ways = fcpu(cpu, "altr,tlb-num-ways"); + if (!cpuinfo.tlb_num_ways) + panic("altr,tlb-num-ways can't be 0. Please check your hardware " + "system\n"); + cpuinfo.icache_line_size = fcpu(cpu, "icache-line-size"); + cpuinfo.icache_size = fcpu(cpu, "icache-size"); + if (CONFIG_NIOS2_ICACHE_SIZE != cpuinfo.icache_size) + pr_warn("Warning: icache size configuration mismatch " + "(0x%x vs 0x%x) of CONFIG_NIOS2_ICACHE_SIZE vs " + "device tree icache-size\n", + CONFIG_NIOS2_ICACHE_SIZE, cpuinfo.icache_size); + + cpuinfo.dcache_line_size = fcpu(cpu, "dcache-line-size"); + if (CONFIG_NIOS2_DCACHE_LINE_SIZE != cpuinfo.dcache_line_size) + pr_warn("Warning: dcache line size configuration mismatch " + "(0x%x vs 0x%x) of CONFIG_NIOS2_DCACHE_LINE_SIZE vs " + "device tree dcache-line-size\n", + CONFIG_NIOS2_DCACHE_LINE_SIZE, cpuinfo.dcache_line_size); + cpuinfo.dcache_size = fcpu(cpu, "dcache-size"); + if (CONFIG_NIOS2_DCACHE_SIZE != cpuinfo.dcache_size) + pr_warn("Warning: dcache size configuration mismatch " + "(0x%x vs 0x%x) of CONFIG_NIOS2_DCACHE_SIZE vs " + "device tree dcache-size\n", + CONFIG_NIOS2_DCACHE_SIZE, cpuinfo.dcache_size); + + cpuinfo.tlb_pid_num_bits = fcpu(cpu, "altr,pid-num-bits"); + cpuinfo.tlb_num_ways_log2 = ilog2(cpuinfo.tlb_num_ways); + cpuinfo.tlb_num_entries = fcpu(cpu, "altr,tlb-num-entries"); + cpuinfo.tlb_num_lines = cpuinfo.tlb_num_entries / cpuinfo.tlb_num_ways; + cpuinfo.tlb_ptr_sz = fcpu(cpu, "altr,tlb-ptr-sz"); + + cpuinfo.reset_addr = fcpu(cpu, "altr,reset-addr"); + cpuinfo.exception_addr = fcpu(cpu, "altr,exception-addr"); + cpuinfo.fast_tlb_miss_exc_addr = fcpu(cpu, "altr,fast-tlb-miss-addr"); + + of_node_put(cpu); +} + +#ifdef CONFIG_PROC_FS + +/* + * Get CPU information for use by the procfs. + */ +static int show_cpuinfo(struct seq_file *m, void *v) +{ + const u32 clockfreq = cpuinfo.cpu_clock_freq; + + seq_printf(m, + "CPU:\t\tNios II/%s\n" + "REV:\t\t%i\n" + "MMU:\t\t%s\n" + "FPU:\t\tnone\n" + "Clocking:\t%u.%02u MHz\n" + "BogoMips:\t%lu.%02lu\n" + "Calibration:\t%lu loops\n", + cpuinfo.cpu_impl, + CONFIG_NIOS2_ARCH_REVISION, + cpuinfo.mmu ? "present" : "none", + clockfreq / 1000000, (clockfreq / 100000) % 10, + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100, + (loops_per_jiffy * HZ)); + + seq_printf(m, + "HW:\n" + " MUL:\t\t%s\n" + " MULX:\t\t%s\n" + " DIV:\t\t%s\n" + " BMX:\t\t%s\n" + " CDX:\t\t%s\n", + cpuinfo.has_mul ? "yes" : "no", + cpuinfo.has_mulx ? "yes" : "no", + cpuinfo.has_div ? "yes" : "no", + cpuinfo.has_bmx ? "yes" : "no", + cpuinfo.has_cdx ? "yes" : "no"); + + seq_printf(m, + "Icache:\t\t%ukB, line length: %u\n", + cpuinfo.icache_size >> 10, + cpuinfo.icache_line_size); + + seq_printf(m, + "Dcache:\t\t%ukB, line length: %u\n", + cpuinfo.dcache_size >> 10, + cpuinfo.dcache_line_size); + + seq_printf(m, + "TLB:\t\t%u ways, %u entries, %u PID bits\n", + cpuinfo.tlb_num_ways, + cpuinfo.tlb_num_entries, + cpuinfo.tlb_pid_num_bits); + + return 0; +} + +static void *cpuinfo_start(struct seq_file *m, loff_t *pos) +{ + unsigned long i = *pos; + + return i < num_possible_cpus() ? (void *) (i + 1) : NULL; +} + +static void *cpuinfo_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return cpuinfo_start(m, pos); +} + +static void cpuinfo_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + .start = cpuinfo_start, + .next = cpuinfo_next, + .stop = cpuinfo_stop, + .show = show_cpuinfo +}; + +#endif /* CONFIG_PROC_FS */ -- cgit v1.2.3