From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/openrisc/kernel/setup.c | 392 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 392 insertions(+) create mode 100644 arch/openrisc/kernel/setup.c (limited to 'arch/openrisc/kernel/setup.c') diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c new file mode 100644 index 000000000..0cd04d936 --- /dev/null +++ b/arch/openrisc/kernel/setup.c @@ -0,0 +1,392 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * OpenRISC setup.c + * + * Linux architectural port borrowing liberally from similar works of + * others. All original copyrights apply as per the original source + * declaration. + * + * Modifications for the OpenRISC architecture: + * Copyright (C) 2003 Matjaz Breskvar + * Copyright (C) 2010-2011 Jonas Bonn + * + * This file handles the architecture-dependent parts of initialization + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "vmlinux.h" + +static void __init setup_memory(void) +{ + unsigned long ram_start_pfn; + unsigned long ram_end_pfn; + phys_addr_t memory_start, memory_end; + + memory_end = memory_start = 0; + + /* Find main memory where is the kernel, we assume its the only one */ + memory_start = memblock_start_of_DRAM(); + memory_end = memblock_end_of_DRAM(); + + if (!memory_end) { + panic("No memory!"); + } + + ram_start_pfn = PFN_UP(memory_start); + ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM()); + + /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */ + min_low_pfn = ram_start_pfn; + max_low_pfn = ram_end_pfn; + max_pfn = ram_end_pfn; + + /* + * initialize the boot-time allocator (with low memory only). + * + * This makes the memory from the end of the kernel to the end of + * RAM usable. + */ + memblock_reserve(__pa(_stext), _end - _stext); + +#ifdef CONFIG_BLK_DEV_INITRD + /* Then reserve the initrd, if any */ + if (initrd_start && (initrd_end > initrd_start)) { + unsigned long aligned_start = ALIGN_DOWN(initrd_start, PAGE_SIZE); + unsigned long aligned_end = ALIGN(initrd_end, PAGE_SIZE); + + memblock_reserve(__pa(aligned_start), aligned_end - aligned_start); + } +#endif /* CONFIG_BLK_DEV_INITRD */ + + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); + + memblock_dump_all(); +} + +struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS]; + +static void print_cpuinfo(void) +{ + unsigned long upr = mfspr(SPR_UPR); + unsigned long vr = mfspr(SPR_VR); + unsigned int version; + unsigned int revision; + struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()]; + + version = (vr & SPR_VR_VER) >> 24; + revision = (vr & SPR_VR_REV); + + printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n", + version, revision, cpuinfo->clock_frequency / 1000000); + + if (!(upr & SPR_UPR_UP)) { + printk(KERN_INFO + "-- no UPR register... unable to detect configuration\n"); + return; + } + + if (upr & SPR_UPR_DCP) + printk(KERN_INFO + "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n", + cpuinfo->dcache_size, cpuinfo->dcache_block_size, + cpuinfo->dcache_ways); + else + printk(KERN_INFO "-- dcache disabled\n"); + if (upr & SPR_UPR_ICP) + printk(KERN_INFO + "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n", + cpuinfo->icache_size, cpuinfo->icache_block_size, + cpuinfo->icache_ways); + else + printk(KERN_INFO "-- icache disabled\n"); + + if (upr & SPR_UPR_DMP) + printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n", + 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2), + 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW)); + if (upr & SPR_UPR_IMP) + printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n", + 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2), + 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW)); + + printk(KERN_INFO "-- additional features:\n"); + if (upr & SPR_UPR_DUP) + printk(KERN_INFO "-- debug unit\n"); + if (upr & SPR_UPR_PCUP) + printk(KERN_INFO "-- performance counters\n"); + if (upr & SPR_UPR_PMP) + printk(KERN_INFO "-- power management\n"); + if (upr & SPR_UPR_PICP) + printk(KERN_INFO "-- PIC\n"); + if (upr & SPR_UPR_TTP) + printk(KERN_INFO "-- timer\n"); + if (upr & SPR_UPR_CUP) + printk(KERN_INFO "-- custom unit(s)\n"); +} + +static struct device_node *setup_find_cpu_node(int cpu) +{ + u32 hwid; + struct device_node *cpun; + + for_each_of_cpu_node(cpun) { + if (of_property_read_u32(cpun, "reg", &hwid)) + continue; + if (hwid == cpu) + return cpun; + } + + return NULL; +} + +void __init setup_cpuinfo(void) +{ + struct device_node *cpu; + unsigned long iccfgr, dccfgr; + unsigned long cache_set_size; + int cpu_id = smp_processor_id(); + struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id]; + + cpu = setup_find_cpu_node(cpu_id); + if (!cpu) + panic("Couldn't find CPU%d in device tree...\n", cpu_id); + + iccfgr = mfspr(SPR_ICCFGR); + cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW); + cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3); + cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7); + cpuinfo->icache_size = + cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size; + + dccfgr = mfspr(SPR_DCCFGR); + cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW); + cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3); + cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7); + cpuinfo->dcache_size = + cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size; + + if (of_property_read_u32(cpu, "clock-frequency", + &cpuinfo->clock_frequency)) { + printk(KERN_WARNING + "Device tree missing CPU 'clock-frequency' parameter." + "Assuming frequency 25MHZ" + "This is probably not what you want."); + } + + cpuinfo->coreid = mfspr(SPR_COREID); + + of_node_put(cpu); + + print_cpuinfo(); +} + +/** + * or1k_early_setup + * @fdt: pointer to the start of the device tree in memory or NULL + * + * Handles the pointer to the device tree that this kernel is to use + * for establishing the available platform devices. + * + * Falls back on built-in device tree in case null pointer is passed. + */ + +void __init or1k_early_setup(void *fdt) +{ + if (fdt) + pr_info("FDT at %p\n", fdt); + else { + fdt = __dtb_start; + pr_info("Compiled-in FDT at %p\n", fdt); + } + early_init_devtree(fdt); +} + +static inline unsigned long extract_value_bits(unsigned long reg, + short bit_nr, short width) +{ + return (reg >> bit_nr) & (0 << width); +} + +static inline unsigned long extract_value(unsigned long reg, unsigned long mask) +{ + while (!(mask & 0x1)) { + reg = reg >> 1; + mask = mask >> 1; + } + return mask & reg; +} + +/* + * calibrate_delay + * + * Lightweight calibrate_delay implementation that calculates loops_per_jiffy + * from the clock frequency passed in via the device tree + * + */ + +void calibrate_delay(void) +{ + const int *val; + struct device_node *cpu = setup_find_cpu_node(smp_processor_id()); + + val = of_get_property(cpu, "clock-frequency", NULL); + if (!val) + panic("no cpu 'clock-frequency' parameter in device tree"); + loops_per_jiffy = *val / HZ; + pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n", + loops_per_jiffy / (500000 / HZ), + (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy); + + of_node_put(cpu); +} + +void __init setup_arch(char **cmdline_p) +{ + unflatten_and_copy_device_tree(); + + setup_cpuinfo(); + +#ifdef CONFIG_SMP + smp_init_cpus(); +#endif + + /* process 1's initial memory region is the kernel code/data */ + setup_initial_init_mm(_stext, _etext, _edata, _end); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start == initrd_end) { + printk(KERN_INFO "Initial ramdisk not found\n"); + initrd_start = 0; + initrd_end = 0; + } else { + printk(KERN_INFO "Initial ramdisk at: 0x%p (%lu bytes)\n", + (void *)(initrd_start), initrd_end - initrd_start); + initrd_below_start_ok = 1; + } +#endif + + /* setup memblock allocator */ + setup_memory(); + + /* paging_init() sets up the MMU and marks all pages as reserved */ + paging_init(); + + *cmdline_p = boot_command_line; + + printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n"); +} + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + unsigned int vr, cpucfgr; + unsigned int avr; + unsigned int version; + struct cpuinfo_or1k *cpuinfo = v; + + vr = mfspr(SPR_VR); + cpucfgr = mfspr(SPR_CPUCFGR); + +#ifdef CONFIG_SMP + seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid); +#endif + if (vr & SPR_VR_UVRP) { + vr = mfspr(SPR_VR2); + version = vr & SPR_VR2_VER; + avr = mfspr(SPR_AVR); + seq_printf(m, "cpu architecture\t: " + "OpenRISC 1000 (%d.%d-rev%d)\n", + (avr >> 24) & 0xff, + (avr >> 16) & 0xff, + (avr >> 8) & 0xff); + seq_printf(m, "cpu implementation id\t: 0x%x\n", + (vr & SPR_VR2_CPUID) >> 24); + seq_printf(m, "cpu version\t\t: 0x%x\n", version); + } else { + version = (vr & SPR_VR_VER) >> 24; + seq_printf(m, "cpu\t\t\t: OpenRISC-%x\n", version); + seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV); + } + seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ); + seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size); + seq_printf(m, "dcache block size\t: %d bytes\n", + cpuinfo->dcache_block_size); + seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways); + seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size); + seq_printf(m, "icache block size\t: %d bytes\n", + cpuinfo->icache_block_size); + seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways); + seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n", + 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2), + 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW)); + seq_printf(m, "dmmu\t\t\t: %d entries, %lu ways\n", + 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2), + 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW)); + seq_printf(m, "bogomips\t\t: %lu.%02lu\n", + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100); + + seq_puts(m, "features\t\t: "); + seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB32S ? "orbis32" : ""); + seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB64S ? "orbis64" : ""); + seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF32S ? "orfpx32" : ""); + seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF64S ? "orfpx64" : ""); + seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OV64S ? "orvdx64" : ""); + seq_puts(m, "\n"); + + seq_puts(m, "\n"); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + *pos = cpumask_next(*pos - 1, cpu_online_mask); + if ((*pos) < nr_cpu_ids) + return &cpuinfo_or1k[*pos]; + return NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + (*pos)++; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; -- cgit v1.2.3