From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/openrisc/kernel/signal.c | 319 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 319 insertions(+) create mode 100644 arch/openrisc/kernel/signal.c (limited to 'arch/openrisc/kernel/signal.c') diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c new file mode 100644 index 000000000..80f69740c --- /dev/null +++ b/arch/openrisc/kernel/signal.c @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * OpenRISC signal.c + * + * Linux architectural port borrowing liberally from similar works of + * others. All original copyrights apply as per the original source + * declaration. + * + * Modifications for the OpenRISC architecture: + * Copyright (C) 2003 Matjaz Breskvar + * Copyright (C) 2010-2011 Jonas Bonn + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +struct rt_sigframe { + struct siginfo info; + struct ucontext uc; + unsigned char retcode[16]; /* trampoline code */ +}; + +static int restore_sigcontext(struct pt_regs *regs, + struct sigcontext __user *sc) +{ + int err = 0; + + /* Always make any pending restarted system calls return -EINTR */ + current->restart_block.fn = do_no_restart_syscall; + + /* + * Restore the regs from &sc->regs. + * (sc is already checked since the sigframe was + * checked in sys_sigreturn previously) + */ + err |= __copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long)); + err |= __copy_from_user(®s->pc, &sc->regs.pc, sizeof(unsigned long)); + err |= __copy_from_user(®s->sr, &sc->regs.sr, sizeof(unsigned long)); + + /* make sure the SM-bit is cleared so user-mode cannot fool us */ + regs->sr &= ~SPR_SR_SM; + + regs->orig_gpr11 = -1; /* Avoid syscall restart checks */ + + /* TODO: the other ports use regs->orig_XX to disable syscall checks + * after this completes, but we don't use that mechanism. maybe we can + * use it now ? + */ + + return err; +} + +asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs) +{ + struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->sp; + sigset_t set; + + /* + * Since we stacked the signal on a dword boundary, + * then frame should be dword aligned here. If it's + * not, then the user is trying to mess with us. + */ + if (((unsigned long)frame) & 3) + goto badframe; + + if (!access_ok(frame, sizeof(*frame))) + goto badframe; + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + set_current_blocked(&set); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) + goto badframe; + + if (restore_altstack(&frame->uc.uc_stack)) + goto badframe; + + return regs->gpr[11]; + +badframe: + force_sig(SIGSEGV); + return 0; +} + +/* + * Set up a signal frame. + */ + +static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) +{ + int err = 0; + + /* copy the regs */ + /* There should be no need to save callee-saved registers here... + * ...but we save them anyway. Revisit this + */ + err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long)); + err |= __copy_to_user(&sc->regs.pc, ®s->pc, sizeof(unsigned long)); + err |= __copy_to_user(&sc->regs.sr, ®s->sr, sizeof(unsigned long)); + + return err; +} + +static inline unsigned long align_sigframe(unsigned long sp) +{ + return sp & ~3UL; +} + +/* + * Work out where the signal frame should go. It's either on the user stack + * or the alternate stack. + */ + +static inline void __user *get_sigframe(struct ksignal *ksig, + struct pt_regs *regs, size_t frame_size) +{ + unsigned long sp = regs->sp; + + /* redzone */ + sp -= STACK_FRAME_OVERHEAD; + sp = sigsp(sp, ksig); + sp = align_sigframe(sp - frame_size); + + return (void __user *)sp; +} + +/* grab and setup a signal frame. + * + * basically we stack a lot of state info, and arrange for the + * user-mode program to return to the kernel using either a + * trampoline which performs the syscall sigreturn, or a provided + * user-mode trampoline. + */ +static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, + struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + unsigned long return_ip; + int err = 0; + + frame = get_sigframe(ksig, regs, sizeof(*frame)); + + if (!access_ok(frame, sizeof(*frame))) + return -EFAULT; + + /* Create siginfo. */ + if (ksig->ka.sa.sa_flags & SA_SIGINFO) + err |= copy_siginfo_to_user(&frame->info, &ksig->info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(NULL, &frame->uc.uc_link); + err |= __save_altstack(&frame->uc.uc_stack, regs->sp); + err |= setup_sigcontext(regs, &frame->uc.uc_mcontext); + + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + if (err) + return -EFAULT; + + /* trampoline - the desired return ip is the retcode itself */ + return_ip = (unsigned long)&frame->retcode; + /* This is: + l.ori r11,r0,__NR_sigreturn + l.sys 1 + */ + err |= __put_user(0xa960, (short __user *)(frame->retcode + 0)); + err |= __put_user(__NR_rt_sigreturn, (short __user *)(frame->retcode + 2)); + err |= __put_user(0x20000001, (unsigned long __user *)(frame->retcode + 4)); + err |= __put_user(0x15000000, (unsigned long __user *)(frame->retcode + 8)); + + if (err) + return -EFAULT; + + /* Set up registers for signal handler */ + regs->pc = (unsigned long)ksig->ka.sa.sa_handler; /* what we enter NOW */ + regs->gpr[9] = (unsigned long)return_ip; /* what we enter LATER */ + regs->gpr[3] = (unsigned long)ksig->sig; /* arg 1: signo */ + regs->gpr[4] = (unsigned long)&frame->info; /* arg 2: (siginfo_t*) */ + regs->gpr[5] = (unsigned long)&frame->uc; /* arg 3: ucontext */ + + /* actually move the usp to reflect the stacked frame */ + regs->sp = (unsigned long)frame; + + return 0; +} + +static inline void +handle_signal(struct ksignal *ksig, struct pt_regs *regs) +{ + int ret; + + ret = setup_rt_frame(ksig, sigmask_to_save(), regs); + + signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Also note that the regs structure given here as an argument, is the latest + * pushed pt_regs. It may or may not be the same as the first pushed registers + * when the initial usermode->kernelmode transition took place. Therefore + * we can use user_mode(regs) to see if we came directly from kernel or user + * mode below. + */ + +int do_signal(struct pt_regs *regs, int syscall) +{ + struct ksignal ksig; + unsigned long continue_addr = 0; + unsigned long restart_addr = 0; + unsigned long retval = 0; + int restart = 0; + + if (syscall) { + continue_addr = regs->pc; + restart_addr = continue_addr - 4; + retval = regs->gpr[11]; + + /* + * Setup syscall restart here so that a debugger will + * see the already changed PC. + */ + switch (retval) { + case -ERESTART_RESTARTBLOCK: + restart = -2; + fallthrough; + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + restart++; + regs->gpr[11] = regs->orig_gpr11; + regs->pc = restart_addr; + break; + } + } + + /* + * Get the signal to deliver. During the call to get_signal the + * debugger may change all our registers so we may need to revert + * the decision to restart the syscall; specifically, if the PC is + * changed, don't restart the syscall. + */ + if (get_signal(&ksig)) { + if (unlikely(restart) && regs->pc == restart_addr) { + if (retval == -ERESTARTNOHAND || + retval == -ERESTART_RESTARTBLOCK + || (retval == -ERESTARTSYS + && !(ksig.ka.sa.sa_flags & SA_RESTART))) { + /* No automatic restart */ + regs->gpr[11] = -EINTR; + regs->pc = continue_addr; + } + } + handle_signal(&ksig, regs); + } else { + /* no handler */ + restore_saved_sigmask(); + /* + * Restore pt_regs PC as syscall restart will be handled by + * kernel without return to userspace + */ + if (unlikely(restart) && regs->pc == restart_addr) { + regs->pc = continue_addr; + return restart; + } + } + + return 0; +} + +asmlinkage int +do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) +{ + do { + if (likely(thread_flags & _TIF_NEED_RESCHED)) { + schedule(); + } else { + if (unlikely(!user_mode(regs))) + return 0; + local_irq_enable(); + if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) { + int restart = do_signal(regs, syscall); + if (unlikely(restart)) { + /* + * Restart without handlers. + * Deal with it without leaving + * the kernel space. + */ + return restart; + } + syscall = 0; + } else { + resume_user_mode_work(regs); + } + } + local_irq_disable(); + thread_flags = read_thread_flags(); + } while (thread_flags & _TIF_WORK_MASK); + return 0; +} -- cgit v1.2.3