From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/openrisc/kernel/time.c | 177 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 arch/openrisc/kernel/time.c (limited to 'arch/openrisc/kernel/time.c') diff --git a/arch/openrisc/kernel/time.c b/arch/openrisc/kernel/time.c new file mode 100644 index 000000000..8e26c1af5 --- /dev/null +++ b/arch/openrisc/kernel/time.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * OpenRISC time.c + * + * Linux architectural port borrowing liberally from similar works of + * others. All original copyrights apply as per the original source + * declaration. + * + * Modifications for the OpenRISC architecture: + * Copyright (C) 2010-2011 Jonas Bonn + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +/* Test the timer ticks to count, used in sync routine */ +inline void openrisc_timer_set(unsigned long count) +{ + mtspr(SPR_TTCR, count); +} + +/* Set the timer to trigger in delta cycles */ +inline void openrisc_timer_set_next(unsigned long delta) +{ + u32 c; + + /* Read 32-bit counter value, add delta, mask off the low 28 bits. + * We're guaranteed delta won't be bigger than 28 bits because the + * generic timekeeping code ensures that for us. + */ + c = mfspr(SPR_TTCR); + c += delta; + c &= SPR_TTMR_TP; + + /* Set counter and enable interrupt. + * Keep timer in continuous mode always. + */ + mtspr(SPR_TTMR, SPR_TTMR_CR | SPR_TTMR_IE | c); +} + +static int openrisc_timer_set_next_event(unsigned long delta, + struct clock_event_device *dev) +{ + openrisc_timer_set_next(delta); + return 0; +} + +/* This is the clock event device based on the OR1K tick timer. + * As the timer is being used as a continuous clock-source (required for HR + * timers) we cannot enable the PERIODIC feature. The tick timer can run using + * one-shot events, so no problem. + */ +static DEFINE_PER_CPU(struct clock_event_device, clockevent_openrisc_timer); + +void openrisc_clockevent_init(void) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *evt = + &per_cpu(clockevent_openrisc_timer, cpu); + struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu]; + + mtspr(SPR_TTMR, SPR_TTMR_CR); + +#ifdef CONFIG_SMP + evt->broadcast = tick_broadcast; +#endif + evt->name = "openrisc_timer_clockevent", + evt->features = CLOCK_EVT_FEAT_ONESHOT, + evt->rating = 300, + evt->set_next_event = openrisc_timer_set_next_event, + + evt->cpumask = cpumask_of(cpu); + + /* We only have 28 bits */ + clockevents_config_and_register(evt, cpuinfo->clock_frequency, + 100, 0x0fffffff); + +} + +static inline void timer_ack(void) +{ + /* Clear the IP bit and disable further interrupts */ + /* This can be done very simply... we just need to keep the timer + running, so just maintain the CR bits while clearing the rest + of the register + */ + mtspr(SPR_TTMR, SPR_TTMR_CR); +} + +/* + * The timer interrupt is mostly handled in generic code nowadays... this + * function just acknowledges the interrupt and fires the event handler that + * has been set on the clockevent device by the generic time management code. + * + * This function needs to be called by the timer exception handler and that's + * all the exception handler needs to do. + */ + +irqreturn_t __irq_entry timer_interrupt(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + unsigned int cpu = smp_processor_id(); + struct clock_event_device *evt = + &per_cpu(clockevent_openrisc_timer, cpu); + + timer_ack(); + + /* + * update_process_times() expects us to have called irq_enter(). + */ + irq_enter(); + evt->event_handler(evt); + irq_exit(); + + set_irq_regs(old_regs); + + return IRQ_HANDLED; +} + +/* + * Clocksource: Based on OpenRISC timer/counter + * + * This sets up the OpenRISC Tick Timer as a clock source. The tick timer + * is 32 bits wide and runs at the CPU clock frequency. + */ +static u64 openrisc_timer_read(struct clocksource *cs) +{ + return (u64) mfspr(SPR_TTCR); +} + +static struct clocksource openrisc_timer = { + .name = "openrisc_timer", + .rating = 200, + .read = openrisc_timer_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init openrisc_timer_init(void) +{ + struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()]; + + if (clocksource_register_hz(&openrisc_timer, cpuinfo->clock_frequency)) + panic("failed to register clocksource"); + + /* Enable the incrementer: 'continuous' mode with interrupt disabled */ + mtspr(SPR_TTMR, SPR_TTMR_CR); + + return 0; +} + +void __init time_init(void) +{ + u32 upr; + + upr = mfspr(SPR_UPR); + if (!(upr & SPR_UPR_TTP)) + panic("Linux not supported on devices without tick timer"); + + openrisc_timer_init(); + openrisc_clockevent_init(); + + of_clk_init(NULL); + timer_probe(); +} -- cgit v1.2.3