From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/parisc/Makefile | 205 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 205 insertions(+) create mode 100644 arch/parisc/Makefile (limited to 'arch/parisc/Makefile') diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile new file mode 100644 index 000000000..a2d860052 --- /dev/null +++ b/arch/parisc/Makefile @@ -0,0 +1,205 @@ +# +# parisc/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994 by Linus Torvalds +# Portions Copyright (C) 1999 The Puffin Group +# +# Modified for PA-RISC Linux by Paul Lahaie, Alex deVries, +# Mike Shaver, Helge Deller and Martin K. Petersen +# + +boot := arch/parisc/boot +KBUILD_IMAGE := $(boot)/bzImage + +CHECKFLAGS += -D__hppa__=1 + +ifdef CONFIG_64BIT +UTS_MACHINE := parisc64 +CHECKFLAGS += -D__LP64__=1 +LD_BFD := elf64-hppa-linux +else # 32-bit +LD_BFD := elf32-hppa-linux +endif + +# select defconfig based on actual architecture +ifeq ($(ARCH),parisc64) + KBUILD_DEFCONFIG := generic-64bit_defconfig + CC_ARCHES := hppa64 +else + KBUILD_DEFCONFIG := generic-32bit_defconfig + CC_ARCHES := hppa hppa2.0 hppa1.1 +endif + +export LD_BFD + +# Set default 32 bits cross compilers for vdso +CC_ARCHES_32 = hppa hppa2.0 hppa1.1 +CC_SUFFIXES = linux linux-gnu unknown-linux-gnu suse-linux +CROSS32_COMPILE := $(call cc-cross-prefix, \ + $(foreach a,$(CC_ARCHES_32), \ + $(foreach s,$(CC_SUFFIXES),$(a)-$(s)-))) +CROSS32CC := $(CROSS32_COMPILE)gcc +export CROSS32CC + +# Set default cross compiler for kernel build +ifdef cross_compiling + ifeq ($(CROSS_COMPILE),) + CC_SUFFIXES = linux linux-gnu unknown-linux-gnu suse-linux + CROSS_COMPILE := $(call cc-cross-prefix, \ + $(foreach a,$(CC_ARCHES), \ + $(foreach s,$(CC_SUFFIXES),$(a)-$(s)-))) + endif +endif + +ifdef CONFIG_DYNAMIC_FTRACE +ifdef CONFIG_64BIT +NOP_COUNT := 8 +else +NOP_COUNT := 5 +endif + +export CC_USING_RECORD_MCOUNT:=1 +export CC_USING_PATCHABLE_FUNCTION_ENTRY:=1 + +KBUILD_AFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY=1 +KBUILD_CFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY=1 \ + -DFTRACE_PATCHABLE_FUNCTION_SIZE=$(NOP_COUNT) + +CC_FLAGS_FTRACE := -fpatchable-function-entry=$(NOP_COUNT),$(shell echo $$(($(NOP_COUNT)-1))) +endif + +OBJCOPY_FLAGS =-O binary -R .note -R .comment -S + +cflags-y := -pipe + +# These flags should be implied by an hppa-linux configuration, but they +# are not in gcc 3.2. +cflags-y += -mno-space-regs + +# -mfast-indirect-calls is only relevant for 32-bit kernels. +ifndef CONFIG_64BIT +cflags-y += -mfast-indirect-calls +endif + +# Currently we save and restore fpregs on all kernel entry/interruption paths. +# If that gets optimized, we might need to disable the use of fpregs in the +# kernel. +cflags-y += -mdisable-fpregs + +# Use long jumps instead of long branches (needed if your linker fails to +# link a too big vmlinux executable). Not enabled for building modules. +ifdef CONFIG_MLONGCALLS +KBUILD_CFLAGS_KERNEL += -mlong-calls +endif + +# Without this, "ld -r" results in .text sections that are too big (> 0x40000) +# for branches to reach stubs. And multiple .text sections trigger a warning +# when creating the sysfs module information section. +ifndef CONFIG_64BIT +KBUILD_CFLAGS_MODULE += -ffunction-sections +endif + +# select which processor to optimise for +cflags-$(CONFIG_PA7000) += -march=1.1 -mschedule=7100 +cflags-$(CONFIG_PA7200) += -march=1.1 -mschedule=7200 +cflags-$(CONFIG_PA7100LC) += -march=1.1 -mschedule=7100LC +cflags-$(CONFIG_PA7300LC) += -march=1.1 -mschedule=7300 +cflags-$(CONFIG_PA8X00) += -march=2.0 -mschedule=8000 + +KBUILD_CFLAGS += $(cflags-y) +LIBGCC := $(shell $(CC) -print-libgcc-file-name) +export LIBGCC + +libs-y += arch/parisc/lib/ $(LIBGCC) + +boot := arch/parisc/boot + +PALO := $(shell if (which palo 2>&1); then : ; \ + elif [ -x /sbin/palo ]; then echo /sbin/palo; \ + fi) + +PALOCONF := $(shell if [ -f $(srctree)/palo.conf ]; then echo $(srctree)/palo.conf; \ + else echo $(objtree)/palo.conf; \ + fi) + +palo lifimage: vmlinuz + @if test ! -x "$(PALO)"; then \ + echo 'ERROR: Please install palo first (apt-get install palo)';\ + echo 'or build it from source and install it somewhere in your $$PATH';\ + false; \ + fi + @if test ! -f "$(PALOCONF)"; then \ + cp $(srctree)/arch/parisc/defpalo.conf $(objtree)/palo.conf; \ + echo 'A generic palo config file ($(objree)/palo.conf) has been created for you.'; \ + echo 'You should check it and re-run "make palo".'; \ + echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \ + false; \ + fi + $(PALO) -f $(PALOCONF) + +BOOT_TARGETS = zImage Image palo lifimage +INSTALL_TARGETS = zinstall install + +PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS) + +# Default kernel to build +all: bzImage + +zImage: vmlinuz +Image: vmlinux + +bzImage: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +vmlinuz: bzImage + $(OBJCOPY) $(boot)/bzImage $@ + +ifeq ($(KBUILD_EXTMOD),) +# We need to generate vdso-offsets.h before compiling certain files in kernel/. +# In order to do that, we should use the archprepare target, but we can't since +# asm-offsets.h is included in some files used to generate vdso-offsets.h, and +# asm-offsets.h is built in prepare0, for which archprepare is a dependency. +# Therefore we need to generate the header after prepare0 has been made, hence +# this hack. +prepare: vdso_prepare +vdso_prepare: prepare0 + $(if $(CONFIG_64BIT),$(Q)$(MAKE) \ + $(build)=arch/parisc/kernel/vdso64 include/generated/vdso64-offsets.h) + $(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 include/generated/vdso32-offsets.h +endif + +PHONY += vdso_install + +vdso_install: + $(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso $@ + $(if $(CONFIG_COMPAT_VDSO), \ + $(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 $@) + +install: KBUILD_IMAGE := vmlinux +zinstall: KBUILD_IMAGE := vmlinuz +install zinstall: + $(call cmd,install) + +CLEAN_FILES += lifimage +MRPROPER_FILES += palo.conf + +define archhelp + @echo '* vmlinux - Uncompressed kernel image (./vmlinux)' + @echo ' vmlinuz - Compressed kernel image (./vmlinuz)' + @echo ' palo - Bootable image (./lifimage)' + @echo ' install - Install uncompressed vmlinux kernel using' + @echo ' (your) ~/bin/$(INSTALLKERNEL) or' + @echo ' (distribution) /sbin/$(INSTALLKERNEL) or' + @echo ' copy to $$(INSTALL_PATH)' + @echo ' zinstall - Install compressed vmlinuz kernel' +endef + +archheaders: + $(Q)$(MAKE) $(build)=arch/parisc/kernel/syscalls all -- cgit v1.2.3