From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/parisc/lib/io.c | 489 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 489 insertions(+) create mode 100644 arch/parisc/lib/io.c (limited to 'arch/parisc/lib/io.c') diff --git a/arch/parisc/lib/io.c b/arch/parisc/lib/io.c new file mode 100644 index 000000000..7c00496b4 --- /dev/null +++ b/arch/parisc/lib/io.c @@ -0,0 +1,489 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/parisc/lib/io.c + * + * Copyright (c) Matthew Wilcox 2001 for Hewlett-Packard + * Copyright (c) Randolph Chung 2001 + * + * IO accessing functions which shouldn't be inlined because they're too big + */ + +#include +#include +#include + +/* Copies a block of memory to a device in an efficient manner. + * Assumes the device can cope with 32-bit transfers. If it can't, + * don't use this function. + */ +void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + if (((unsigned long)dst & 3) != ((unsigned long)src & 3)) + goto bytecopy; + while ((unsigned long)dst & 3) { + writeb(*(char *)src, dst++); + src++; + count--; + } + while (count > 3) { + __raw_writel(*(u32 *)src, dst); + src += 4; + dst += 4; + count -= 4; + } + bytecopy: + while (count--) { + writeb(*(char *)src, dst++); + src++; + } +} + +/* +** Copies a block of memory from a device in an efficient manner. +** Assumes the device can cope with 32-bit transfers. If it can't, +** don't use this function. +** +** CR16 counts on C3000 reading 256 bytes from Symbios 896 RAM: +** 27341/64 = 427 cyc per int +** 61311/128 = 478 cyc per short +** 122637/256 = 479 cyc per byte +** Ergo bus latencies dominant (not transfer size). +** Minimize total number of transfers at cost of CPU cycles. +** TODO: only look at src alignment and adjust the stores to dest. +*/ +void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + /* first compare alignment of src/dst */ + if ( (((unsigned long)dst ^ (unsigned long)src) & 1) || (count < 2) ) + goto bytecopy; + + if ( (((unsigned long)dst ^ (unsigned long)src) & 2) || (count < 4) ) + goto shortcopy; + + /* Then check for misaligned start address */ + if ((unsigned long)src & 1) { + *(u8 *)dst = readb(src); + src++; + dst++; + count--; + if (count < 2) goto bytecopy; + } + + if ((unsigned long)src & 2) { + *(u16 *)dst = __raw_readw(src); + src += 2; + dst += 2; + count -= 2; + } + + while (count > 3) { + *(u32 *)dst = __raw_readl(src); + dst += 4; + src += 4; + count -= 4; + } + + shortcopy: + while (count > 1) { + *(u16 *)dst = __raw_readw(src); + src += 2; + dst += 2; + count -= 2; + } + + bytecopy: + while (count--) { + *(char *)dst = readb(src); + src++; + dst++; + } +} + +/* Sets a block of memory on a device to a given value. + * Assumes the device can cope with 32-bit transfers. If it can't, + * don't use this function. + */ +void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + u32 val32 = (val << 24) | (val << 16) | (val << 8) | val; + while ((unsigned long)addr & 3) { + writeb(val, addr++); + count--; + } + while (count > 3) { + __raw_writel(val32, addr); + addr += 4; + count -= 4; + } + while (count--) { + writeb(val, addr++); + } +} + +/* + * Read COUNT 8-bit bytes from port PORT into memory starting at + * SRC. + */ +void insb (unsigned long port, void *dst, unsigned long count) +{ + unsigned char *p; + + p = (unsigned char *)dst; + + while (((unsigned long)p) & 0x3) { + if (!count) + return; + count--; + *p = inb(port); + p++; + } + + while (count >= 4) { + unsigned int w; + count -= 4; + w = inb(port) << 24; + w |= inb(port) << 16; + w |= inb(port) << 8; + w |= inb(port); + *(unsigned int *) p = w; + p += 4; + } + + while (count) { + --count; + *p = inb(port); + p++; + } +} + + +/* + * Read COUNT 16-bit words from port PORT into memory starting at + * SRC. SRC must be at least short aligned. This is used by the + * IDE driver to read disk sectors. Performance is important, but + * the interfaces seems to be slow: just using the inlined version + * of the inw() breaks things. + */ +void insw (unsigned long port, void *dst, unsigned long count) +{ + unsigned int l = 0, l2; + unsigned char *p; + + p = (unsigned char *)dst; + + if (!count) + return; + + switch (((unsigned long)p) & 0x3) + { + case 0x00: /* Buffer 32-bit aligned */ + while (count>=2) { + + count -= 2; + l = cpu_to_le16(inw(port)) << 16; + l |= cpu_to_le16(inw(port)); + *(unsigned int *)p = l; + p += 4; + } + if (count) { + *(unsigned short *)p = cpu_to_le16(inw(port)); + } + break; + + case 0x02: /* Buffer 16-bit aligned */ + *(unsigned short *)p = cpu_to_le16(inw(port)); + p += 2; + count--; + while (count>=2) { + + count -= 2; + l = cpu_to_le16(inw(port)) << 16; + l |= cpu_to_le16(inw(port)); + *(unsigned int *)p = l; + p += 4; + } + if (count) { + *(unsigned short *)p = cpu_to_le16(inw(port)); + } + break; + + case 0x01: /* Buffer 8-bit aligned */ + case 0x03: + /* I don't bother with 32bit transfers + * in this case, 16bit will have to do -- DE */ + --count; + + l = cpu_to_le16(inw(port)); + *p = l >> 8; + p++; + while (count--) + { + l2 = cpu_to_le16(inw(port)); + *(unsigned short *)p = (l & 0xff) << 8 | (l2 >> 8); + p += 2; + l = l2; + } + *p = l & 0xff; + break; + } +} + + + +/* + * Read COUNT 32-bit words from port PORT into memory starting at + * SRC. Now works with any alignment in SRC. Performance is important, + * but the interfaces seems to be slow: just using the inlined version + * of the inl() breaks things. + */ +void insl (unsigned long port, void *dst, unsigned long count) +{ + unsigned int l = 0, l2; + unsigned char *p; + + p = (unsigned char *)dst; + + if (!count) + return; + + switch (((unsigned long) dst) & 0x3) + { + case 0x00: /* Buffer 32-bit aligned */ + while (count--) + { + *(unsigned int *)p = cpu_to_le32(inl(port)); + p += 4; + } + break; + + case 0x02: /* Buffer 16-bit aligned */ + --count; + + l = cpu_to_le32(inl(port)); + *(unsigned short *)p = l >> 16; + p += 2; + + while (count--) + { + l2 = cpu_to_le32(inl(port)); + *(unsigned int *)p = (l & 0xffff) << 16 | (l2 >> 16); + p += 4; + l = l2; + } + *(unsigned short *)p = l & 0xffff; + break; + case 0x01: /* Buffer 8-bit aligned */ + --count; + + l = cpu_to_le32(inl(port)); + *(unsigned char *)p = l >> 24; + p++; + *(unsigned short *)p = (l >> 8) & 0xffff; + p += 2; + while (count--) + { + l2 = cpu_to_le32(inl(port)); + *(unsigned int *)p = (l & 0xff) << 24 | (l2 >> 8); + p += 4; + l = l2; + } + *p = l & 0xff; + break; + case 0x03: /* Buffer 8-bit aligned */ + --count; + + l = cpu_to_le32(inl(port)); + *p = l >> 24; + p++; + while (count--) + { + l2 = cpu_to_le32(inl(port)); + *(unsigned int *)p = (l & 0xffffff) << 8 | l2 >> 24; + p += 4; + l = l2; + } + *(unsigned short *)p = (l >> 8) & 0xffff; + p += 2; + *p = l & 0xff; + break; + } +} + + +/* + * Like insb but in the opposite direction. + * Don't worry as much about doing aligned memory transfers: + * doing byte reads the "slow" way isn't nearly as slow as + * doing byte writes the slow way (no r-m-w cycle). + */ +void outsb(unsigned long port, const void * src, unsigned long count) +{ + const unsigned char *p; + + p = (const unsigned char *)src; + while (count) { + count--; + outb(*p, port); + p++; + } +} + +/* + * Like insw but in the opposite direction. This is used by the IDE + * driver to write disk sectors. Performance is important, but the + * interfaces seems to be slow: just using the inlined version of the + * outw() breaks things. + */ +void outsw (unsigned long port, const void *src, unsigned long count) +{ + unsigned int l = 0, l2; + const unsigned char *p; + + p = (const unsigned char *)src; + + if (!count) + return; + + switch (((unsigned long)p) & 0x3) + { + case 0x00: /* Buffer 32-bit aligned */ + while (count>=2) { + count -= 2; + l = *(unsigned int *)p; + p += 4; + outw(le16_to_cpu(l >> 16), port); + outw(le16_to_cpu(l & 0xffff), port); + } + if (count) { + outw(le16_to_cpu(*(unsigned short*)p), port); + } + break; + + case 0x02: /* Buffer 16-bit aligned */ + + outw(le16_to_cpu(*(unsigned short*)p), port); + p += 2; + count--; + + while (count>=2) { + count -= 2; + l = *(unsigned int *)p; + p += 4; + outw(le16_to_cpu(l >> 16), port); + outw(le16_to_cpu(l & 0xffff), port); + } + if (count) { + outw(le16_to_cpu(*(unsigned short *)p), port); + } + break; + + case 0x01: /* Buffer 8-bit aligned */ + /* I don't bother with 32bit transfers + * in this case, 16bit will have to do -- DE */ + + l = *p << 8; + p++; + count--; + while (count) + { + count--; + l2 = *(unsigned short *)p; + p += 2; + outw(le16_to_cpu(l | l2 >> 8), port); + l = l2 << 8; + } + l2 = *(unsigned char *)p; + outw (le16_to_cpu(l | l2>>8), port); + break; + + } +} + + +/* + * Like insl but in the opposite direction. This is used by the IDE + * driver to write disk sectors. Works with any alignment in SRC. + * Performance is important, but the interfaces seems to be slow: + * just using the inlined version of the outl() breaks things. + */ +void outsl (unsigned long port, const void *src, unsigned long count) +{ + unsigned int l = 0, l2; + const unsigned char *p; + + p = (const unsigned char *)src; + + if (!count) + return; + + switch (((unsigned long)p) & 0x3) + { + case 0x00: /* Buffer 32-bit aligned */ + while (count--) + { + outl(le32_to_cpu(*(unsigned int *)p), port); + p += 4; + } + break; + + case 0x02: /* Buffer 16-bit aligned */ + --count; + + l = *(unsigned short *)p; + p += 2; + + while (count--) + { + l2 = *(unsigned int *)p; + p += 4; + outl (le32_to_cpu(l << 16 | l2 >> 16), port); + l = l2; + } + l2 = *(unsigned short *)p; + outl (le32_to_cpu(l << 16 | l2), port); + break; + case 0x01: /* Buffer 8-bit aligned */ + --count; + + l = *p << 24; + p++; + l |= *(unsigned short *)p << 8; + p += 2; + + while (count--) + { + l2 = *(unsigned int *)p; + p += 4; + outl (le32_to_cpu(l | l2 >> 24), port); + l = l2 << 8; + } + l2 = *p; + outl (le32_to_cpu(l | l2), port); + break; + case 0x03: /* Buffer 8-bit aligned */ + --count; + + l = *p << 24; + p++; + + while (count--) + { + l2 = *(unsigned int *)p; + p += 4; + outl (le32_to_cpu(l | l2 >> 8), port); + l = l2 << 24; + } + l2 = *(unsigned short *)p << 16; + p += 2; + l2 |= *p; + outl (le32_to_cpu(l | l2), port); + break; + } +} + +EXPORT_SYMBOL(insb); +EXPORT_SYMBOL(insw); +EXPORT_SYMBOL(insl); +EXPORT_SYMBOL(outsb); +EXPORT_SYMBOL(outsw); +EXPORT_SYMBOL(outsl); -- cgit v1.2.3