From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/parisc/mm/fault.c | 522 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 522 insertions(+) create mode 100644 arch/parisc/mm/fault.c (limited to 'arch/parisc/mm/fault.c') diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c new file mode 100644 index 000000000..869204e97 --- /dev/null +++ b/arch/parisc/mm/fault.c @@ -0,0 +1,522 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * + * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle + * Copyright 1999 SuSE GmbH (Philipp Rumpf, prumpf@tux.org) + * Copyright 1999 Hewlett Packard Co. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DEBUG_NATLB 0 + +/* Various important other fields */ +#define bit22set(x) (x & 0x00000200) +#define bits23_25set(x) (x & 0x000001c0) +#define isGraphicsFlushRead(x) ((x & 0xfc003fdf) == 0x04001a80) + /* extended opcode is 0x6a */ + +#define BITSSET 0x1c0 /* for identifying LDCW */ + + +int show_unhandled_signals = 1; + +/* + * parisc_acctyp(unsigned int inst) -- + * Given a PA-RISC memory access instruction, determine if the + * instruction would perform a memory read or memory write + * operation. + * + * This function assumes that the given instruction is a memory access + * instruction (i.e. you should really only call it if you know that + * the instruction has generated some sort of a memory access fault). + * + * Returns: + * VM_READ if read operation + * VM_WRITE if write operation + * VM_EXEC if execute operation + */ +unsigned long +parisc_acctyp(unsigned long code, unsigned int inst) +{ + if (code == 6 || code == 16) + return VM_EXEC; + + switch (inst & 0xf0000000) { + case 0x40000000: /* load */ + case 0x50000000: /* new load */ + return VM_READ; + + case 0x60000000: /* store */ + case 0x70000000: /* new store */ + return VM_WRITE; + + case 0x20000000: /* coproc */ + case 0x30000000: /* coproc2 */ + if (bit22set(inst)) + return VM_WRITE; + fallthrough; + + case 0x0: /* indexed/memory management */ + if (bit22set(inst)) { + /* + * Check for the 'Graphics Flush Read' instruction. + * It resembles an FDC instruction, except for bits + * 20 and 21. Any combination other than zero will + * utilize the block mover functionality on some + * older PA-RISC platforms. The case where a block + * move is performed from VM to graphics IO space + * should be treated as a READ. + * + * The significance of bits 20,21 in the FDC + * instruction is: + * + * 00 Flush data cache (normal instruction behavior) + * 01 Graphics flush write (IO space -> VM) + * 10 Graphics flush read (VM -> IO space) + * 11 Graphics flush read/write (VM <-> IO space) + */ + if (isGraphicsFlushRead(inst)) + return VM_READ; + return VM_WRITE; + } else { + /* + * Check for LDCWX and LDCWS (semaphore instructions). + * If bits 23 through 25 are all 1's it is one of + * the above two instructions and is a write. + * + * Note: With the limited bits we are looking at, + * this will also catch PROBEW and PROBEWI. However, + * these should never get in here because they don't + * generate exceptions of the type: + * Data TLB miss fault/data page fault + * Data memory protection trap + */ + if (bits23_25set(inst) == BITSSET) + return VM_WRITE; + } + return VM_READ; /* Default */ + } + return VM_READ; /* Default */ +} + +#undef bit22set +#undef bits23_25set +#undef isGraphicsFlushRead +#undef BITSSET + + +#if 0 +/* This is the treewalk to find a vma which is the highest that has + * a start < addr. We're using find_vma_prev instead right now, but + * we might want to use this at some point in the future. Probably + * not, but I want it committed to CVS so I don't lose it :-) + */ + while (tree != vm_avl_empty) { + if (tree->vm_start > addr) { + tree = tree->vm_avl_left; + } else { + prev = tree; + if (prev->vm_next == NULL) + break; + if (prev->vm_next->vm_start > addr) + break; + tree = tree->vm_avl_right; + } + } +#endif + +int fixup_exception(struct pt_regs *regs) +{ + const struct exception_table_entry *fix; + + fix = search_exception_tables(regs->iaoq[0]); + if (fix) { + /* + * Fix up get_user() and put_user(). + * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() sets the least-significant + * bit in the relative address of the fixup routine to indicate + * that gr[ASM_EXCEPTIONTABLE_REG] should be loaded with + * -EFAULT to report a userspace access error. + */ + if (fix->fixup & 1) { + regs->gr[ASM_EXCEPTIONTABLE_REG] = -EFAULT; + + /* zero target register for get_user() */ + if (parisc_acctyp(0, regs->iir) == VM_READ) { + int treg = regs->iir & 0x1f; + BUG_ON(treg == 0); + regs->gr[treg] = 0; + } + } + + regs->iaoq[0] = (unsigned long)&fix->fixup + fix->fixup; + regs->iaoq[0] &= ~3; + /* + * NOTE: In some cases the faulting instruction + * may be in the delay slot of a branch. We + * don't want to take the branch, so we don't + * increment iaoq[1], instead we set it to be + * iaoq[0]+4, and clear the B bit in the PSW + */ + regs->iaoq[1] = regs->iaoq[0] + 4; + regs->gr[0] &= ~PSW_B; /* IPSW in gr[0] */ + + return 1; + } + + return 0; +} + +/* + * parisc hardware trap list + * + * Documented in section 3 "Addressing and Access Control" of the + * "PA-RISC 1.1 Architecture and Instruction Set Reference Manual" + * https://parisc.wiki.kernel.org/index.php/File:Pa11_acd.pdf + * + * For implementation see handle_interruption() in traps.c + */ +static const char * const trap_description[] = { + [1] "High-priority machine check (HPMC)", + [2] "Power failure interrupt", + [3] "Recovery counter trap", + [5] "Low-priority machine check", + [6] "Instruction TLB miss fault", + [7] "Instruction access rights / protection trap", + [8] "Illegal instruction trap", + [9] "Break instruction trap", + [10] "Privileged operation trap", + [11] "Privileged register trap", + [12] "Overflow trap", + [13] "Conditional trap", + [14] "FP Assist Exception trap", + [15] "Data TLB miss fault", + [16] "Non-access ITLB miss fault", + [17] "Non-access DTLB miss fault", + [18] "Data memory protection/unaligned access trap", + [19] "Data memory break trap", + [20] "TLB dirty bit trap", + [21] "Page reference trap", + [22] "Assist emulation trap", + [25] "Taken branch trap", + [26] "Data memory access rights trap", + [27] "Data memory protection ID trap", + [28] "Unaligned data reference trap", +}; + +const char *trap_name(unsigned long code) +{ + const char *t = NULL; + + if (code < ARRAY_SIZE(trap_description)) + t = trap_description[code]; + + return t ? t : "Unknown trap"; +} + +/* + * Print out info about fatal segfaults, if the show_unhandled_signals + * sysctl is set: + */ +static inline void +show_signal_msg(struct pt_regs *regs, unsigned long code, + unsigned long address, struct task_struct *tsk, + struct vm_area_struct *vma) +{ + if (!unhandled_signal(tsk, SIGSEGV)) + return; + + if (!printk_ratelimit()) + return; + + pr_warn("\n"); + pr_warn("do_page_fault() command='%s' type=%lu address=0x%08lx", + tsk->comm, code, address); + print_vma_addr(KERN_CONT " in ", regs->iaoq[0]); + + pr_cont("\ntrap #%lu: %s%c", code, trap_name(code), + vma ? ',':'\n'); + + if (vma) + pr_cont(" vm_start = 0x%08lx, vm_end = 0x%08lx\n", + vma->vm_start, vma->vm_end); + + show_regs(regs); +} + +void do_page_fault(struct pt_regs *regs, unsigned long code, + unsigned long address) +{ + struct vm_area_struct *vma, *prev_vma; + struct task_struct *tsk; + struct mm_struct *mm; + unsigned long acc_type; + vm_fault_t fault = 0; + unsigned int flags; + char *msg; + + tsk = current; + mm = tsk->mm; + if (!mm) { + msg = "Page fault: no context"; + goto no_context; + } + + flags = FAULT_FLAG_DEFAULT; + if (user_mode(regs)) + flags |= FAULT_FLAG_USER; + + acc_type = parisc_acctyp(code, regs->iir); + if (acc_type & VM_WRITE) + flags |= FAULT_FLAG_WRITE; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address); +retry: + mmap_read_lock(mm); + vma = find_vma_prev(mm, address, &prev_vma); + if (!vma || address < vma->vm_start) + goto check_expansion; +/* + * Ok, we have a good vm_area for this memory access. We still need to + * check the access permissions. + */ + +good_area: + + if ((vma->vm_flags & acc_type) != acc_type) + goto bad_area; + + /* + * If for any reason at all we couldn't handle the fault, make + * sure we exit gracefully rather than endlessly redo the + * fault. + */ + + fault = handle_mm_fault(vma, address, flags, regs); + + if (fault_signal_pending(fault, regs)) + return; + + /* The fault is fully completed (including releasing mmap lock) */ + if (fault & VM_FAULT_COMPLETED) + return; + + if (unlikely(fault & VM_FAULT_ERROR)) { + /* + * We hit a shared mapping outside of the file, or some + * other thing happened to us that made us unable to + * handle the page fault gracefully. + */ + if (fault & VM_FAULT_OOM) + goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; + else if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON| + VM_FAULT_HWPOISON_LARGE)) + goto bad_area; + BUG(); + } + if (fault & VM_FAULT_RETRY) { + /* + * No need to mmap_read_unlock(mm) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + flags |= FAULT_FLAG_TRIED; + goto retry; + } + mmap_read_unlock(mm); + return; + +check_expansion: + vma = prev_vma; + if (vma && (expand_stack(vma, address) == 0)) + goto good_area; + +/* + * Something tried to access memory that isn't in our memory map.. + */ +bad_area: + mmap_read_unlock(mm); + + if (user_mode(regs)) { + int signo, si_code; + + switch (code) { + case 15: /* Data TLB miss fault/Data page fault */ + /* send SIGSEGV when outside of vma */ + if (!vma || + address < vma->vm_start || address >= vma->vm_end) { + signo = SIGSEGV; + si_code = SEGV_MAPERR; + break; + } + + /* send SIGSEGV for wrong permissions */ + if ((vma->vm_flags & acc_type) != acc_type) { + signo = SIGSEGV; + si_code = SEGV_ACCERR; + break; + } + + /* probably address is outside of mapped file */ + fallthrough; + case 17: /* NA data TLB miss / page fault */ + case 18: /* Unaligned access - PCXS only */ + signo = SIGBUS; + si_code = (code == 18) ? BUS_ADRALN : BUS_ADRERR; + break; + case 16: /* Non-access instruction TLB miss fault */ + case 26: /* PCXL: Data memory access rights trap */ + default: + signo = SIGSEGV; + si_code = (code == 26) ? SEGV_ACCERR : SEGV_MAPERR; + break; + } +#ifdef CONFIG_MEMORY_FAILURE + if (fault & (VM_FAULT_HWPOISON|VM_FAULT_HWPOISON_LARGE)) { + unsigned int lsb = 0; + printk(KERN_ERR + "MCE: Killing %s:%d due to hardware memory corruption fault at %08lx\n", + tsk->comm, tsk->pid, address); + /* + * Either small page or large page may be poisoned. + * In other words, VM_FAULT_HWPOISON_LARGE and + * VM_FAULT_HWPOISON are mutually exclusive. + */ + if (fault & VM_FAULT_HWPOISON_LARGE) + lsb = hstate_index_to_shift(VM_FAULT_GET_HINDEX(fault)); + else if (fault & VM_FAULT_HWPOISON) + lsb = PAGE_SHIFT; + + force_sig_mceerr(BUS_MCEERR_AR, (void __user *) address, + lsb); + return; + } +#endif + show_signal_msg(regs, code, address, tsk, vma); + + force_sig_fault(signo, si_code, (void __user *) address); + return; + } + msg = "Page fault: bad address"; + +no_context: + + if (!user_mode(regs) && fixup_exception(regs)) { + return; + } + + parisc_terminate(msg, regs, code, address); + +out_of_memory: + mmap_read_unlock(mm); + if (!user_mode(regs)) { + msg = "Page fault: out of memory"; + goto no_context; + } + pagefault_out_of_memory(); +} + +/* Handle non-access data TLB miss faults. + * + * For probe instructions, accesses to userspace are considered allowed + * if they lie in a valid VMA and the access type matches. We are not + * allowed to handle MM faults here so there may be situations where an + * actual access would fail even though a probe was successful. + */ +int +handle_nadtlb_fault(struct pt_regs *regs) +{ + unsigned long insn = regs->iir; + int breg, treg, xreg, val = 0; + struct vm_area_struct *vma, *prev_vma; + struct task_struct *tsk; + struct mm_struct *mm; + unsigned long address; + unsigned long acc_type; + + switch (insn & 0x380) { + case 0x280: + /* FDC instruction */ + fallthrough; + case 0x380: + /* PDC and FIC instructions */ + if (DEBUG_NATLB && printk_ratelimit()) { + pr_warn("WARNING: nullifying cache flush/purge instruction\n"); + show_regs(regs); + } + if (insn & 0x20) { + /* Base modification */ + breg = (insn >> 21) & 0x1f; + xreg = (insn >> 16) & 0x1f; + if (breg && xreg) + regs->gr[breg] += regs->gr[xreg]; + } + regs->gr[0] |= PSW_N; + return 1; + + case 0x180: + /* PROBE instruction */ + treg = insn & 0x1f; + if (regs->isr) { + tsk = current; + mm = tsk->mm; + if (mm) { + /* Search for VMA */ + address = regs->ior; + mmap_read_lock(mm); + vma = find_vma_prev(mm, address, &prev_vma); + mmap_read_unlock(mm); + + /* + * Check if access to the VMA is okay. + * We don't allow for stack expansion. + */ + acc_type = (insn & 0x40) ? VM_WRITE : VM_READ; + if (vma + && address >= vma->vm_start + && (vma->vm_flags & acc_type) == acc_type) + val = 1; + } + } + if (treg) + regs->gr[treg] = val; + regs->gr[0] |= PSW_N; + return 1; + + case 0x300: + /* LPA instruction */ + if (insn & 0x20) { + /* Base modification */ + breg = (insn >> 21) & 0x1f; + xreg = (insn >> 16) & 0x1f; + if (breg && xreg) + regs->gr[breg] += regs->gr[xreg]; + } + treg = insn & 0x1f; + if (treg) + regs->gr[treg] = 0; + regs->gr[0] |= PSW_N; + return 1; + + default: + break; + } + + return 0; +} -- cgit v1.2.3