From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/kernel/eeh_cache.c | 288 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 288 insertions(+) create mode 100644 arch/powerpc/kernel/eeh_cache.c (limited to 'arch/powerpc/kernel/eeh_cache.c') diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c new file mode 100644 index 000000000..2f9dbf8ad --- /dev/null +++ b/arch/powerpc/kernel/eeh_cache.c @@ -0,0 +1,288 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * PCI address cache; allows the lookup of PCI devices based on I/O address + * + * Copyright IBM Corporation 2004 + * Copyright Linas Vepstas 2004 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/** + * DOC: Overview + * + * The pci address cache subsystem. This subsystem places + * PCI device address resources into a red-black tree, sorted + * according to the address range, so that given only an i/o + * address, the corresponding PCI device can be **quickly** + * found. It is safe to perform an address lookup in an interrupt + * context; this ability is an important feature. + * + * Currently, the only customer of this code is the EEH subsystem; + * thus, this code has been somewhat tailored to suit EEH better. + * In particular, the cache does *not* hold the addresses of devices + * for which EEH is not enabled. + * + * (Implementation Note: The RB tree seems to be better/faster + * than any hash algo I could think of for this problem, even + * with the penalty of slow pointer chases for d-cache misses). + */ + +struct pci_io_addr_range { + struct rb_node rb_node; + resource_size_t addr_lo; + resource_size_t addr_hi; + struct eeh_dev *edev; + struct pci_dev *pcidev; + unsigned long flags; +}; + +static struct pci_io_addr_cache { + struct rb_root rb_root; + spinlock_t piar_lock; +} pci_io_addr_cache_root; + +static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr) +{ + struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node; + + while (n) { + struct pci_io_addr_range *piar; + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + + if (addr < piar->addr_lo) + n = n->rb_left; + else if (addr > piar->addr_hi) + n = n->rb_right; + else + return piar->edev; + } + + return NULL; +} + +/** + * eeh_addr_cache_get_dev - Get device, given only address + * @addr: mmio (PIO) phys address or i/o port number + * + * Given an mmio phys address, or a port number, find a pci device + * that implements this address. I/O port numbers are assumed to be offset + * from zero (that is, they do *not* have pci_io_addr added in). + * It is safe to call this function within an interrupt. + */ +struct eeh_dev *eeh_addr_cache_get_dev(unsigned long addr) +{ + struct eeh_dev *edev; + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + edev = __eeh_addr_cache_get_device(addr); + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); + return edev; +} + +#ifdef DEBUG +/* + * Handy-dandy debug print routine, does nothing more + * than print out the contents of our addr cache. + */ +static void eeh_addr_cache_print(struct pci_io_addr_cache *cache) +{ + struct rb_node *n; + int cnt = 0; + + n = rb_first(&cache->rb_root); + while (n) { + struct pci_io_addr_range *piar; + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + pr_info("PCI: %s addr range %d [%pap-%pap]: %s\n", + (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt, + &piar->addr_lo, &piar->addr_hi, pci_name(piar->pcidev)); + cnt++; + n = rb_next(n); + } +} +#endif + +/* Insert address range into the rb tree. */ +static struct pci_io_addr_range * +eeh_addr_cache_insert(struct pci_dev *dev, resource_size_t alo, + resource_size_t ahi, unsigned long flags) +{ + struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node; + struct rb_node *parent = NULL; + struct pci_io_addr_range *piar; + + /* Walk tree, find a place to insert into tree */ + while (*p) { + parent = *p; + piar = rb_entry(parent, struct pci_io_addr_range, rb_node); + if (ahi < piar->addr_lo) { + p = &parent->rb_left; + } else if (alo > piar->addr_hi) { + p = &parent->rb_right; + } else { + if (dev != piar->pcidev || + alo != piar->addr_lo || ahi != piar->addr_hi) { + pr_warn("PIAR: overlapping address range\n"); + } + return piar; + } + } + piar = kzalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC); + if (!piar) + return NULL; + + piar->addr_lo = alo; + piar->addr_hi = ahi; + piar->edev = pci_dev_to_eeh_dev(dev); + piar->pcidev = dev; + piar->flags = flags; + + eeh_edev_dbg(piar->edev, "PIAR: insert range=[%pap:%pap]\n", + &alo, &ahi); + + rb_link_node(&piar->rb_node, parent, p); + rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); + + return piar; +} + +static void __eeh_addr_cache_insert_dev(struct pci_dev *dev) +{ + struct eeh_dev *edev; + int i; + + edev = pci_dev_to_eeh_dev(dev); + if (!edev) { + pr_warn("PCI: no EEH dev found for %s\n", + pci_name(dev)); + return; + } + + /* Skip any devices for which EEH is not enabled. */ + if (!edev->pe) { + dev_dbg(&dev->dev, "EEH: Skip building address cache\n"); + return; + } + + /* + * Walk resources on this device, poke the first 7 (6 normal BAR and 1 + * ROM BAR) into the tree. + */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + resource_size_t start = pci_resource_start(dev,i); + resource_size_t end = pci_resource_end(dev,i); + unsigned long flags = pci_resource_flags(dev,i); + + /* We are interested only bus addresses, not dma or other stuff */ + if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if (start == 0 || ~start == 0 || end == 0 || ~end == 0) + continue; + eeh_addr_cache_insert(dev, start, end, flags); + } +} + +/** + * eeh_addr_cache_insert_dev - Add a device to the address cache + * @dev: PCI device whose I/O addresses we are interested in. + * + * In order to support the fast lookup of devices based on addresses, + * we maintain a cache of devices that can be quickly searched. + * This routine adds a device to that cache. + */ +void eeh_addr_cache_insert_dev(struct pci_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + __eeh_addr_cache_insert_dev(dev); + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); +} + +static inline void __eeh_addr_cache_rmv_dev(struct pci_dev *dev) +{ + struct rb_node *n; + +restart: + n = rb_first(&pci_io_addr_cache_root.rb_root); + while (n) { + struct pci_io_addr_range *piar; + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + + if (piar->pcidev == dev) { + eeh_edev_dbg(piar->edev, "PIAR: remove range=[%pap:%pap]\n", + &piar->addr_lo, &piar->addr_hi); + rb_erase(n, &pci_io_addr_cache_root.rb_root); + kfree(piar); + goto restart; + } + n = rb_next(n); + } +} + +/** + * eeh_addr_cache_rmv_dev - remove pci device from addr cache + * @dev: device to remove + * + * Remove a device from the addr-cache tree. + * This is potentially expensive, since it will walk + * the tree multiple times (once per resource). + * But so what; device removal doesn't need to be that fast. + */ +void eeh_addr_cache_rmv_dev(struct pci_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + __eeh_addr_cache_rmv_dev(dev); + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); +} + +/** + * eeh_addr_cache_init - Initialize a cache of I/O addresses + * + * Initialize a cache of pci i/o addresses. This cache will be used to + * find the pci device that corresponds to a given address. + */ +void eeh_addr_cache_init(void) +{ + spin_lock_init(&pci_io_addr_cache_root.piar_lock); +} + +static int eeh_addr_cache_show(struct seq_file *s, void *v) +{ + struct pci_io_addr_range *piar; + struct rb_node *n; + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + for (n = rb_first(&pci_io_addr_cache_root.rb_root); n; n = rb_next(n)) { + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + + seq_printf(s, "%s addr range [%pap-%pap]: %s\n", + (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", + &piar->addr_lo, &piar->addr_hi, pci_name(piar->pcidev)); + } + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(eeh_addr_cache); + +void __init eeh_cache_debugfs_init(void) +{ + debugfs_create_file_unsafe("eeh_address_cache", 0400, + arch_debugfs_dir, NULL, + &eeh_addr_cache_fops); +} -- cgit v1.2.3