From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/kernel/irq_64.c | 495 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 495 insertions(+) create mode 100644 arch/powerpc/kernel/irq_64.c (limited to 'arch/powerpc/kernel/irq_64.c') diff --git a/arch/powerpc/kernel/irq_64.c b/arch/powerpc/kernel/irq_64.c new file mode 100644 index 000000000..eb2b380e5 --- /dev/null +++ b/arch/powerpc/kernel/irq_64.c @@ -0,0 +1,495 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Derived from arch/i386/kernel/irq.c + * Copyright (C) 1992 Linus Torvalds + * Adapted from arch/i386 by Gary Thomas + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Updated and modified by Cort Dougan + * Copyright (C) 1996-2001 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras + * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) + * + * This file contains the code used by various IRQ handling routines: + * asking for different IRQ's should be done through these routines + * instead of just grabbing them. Thus setups with different IRQ numbers + * shouldn't result in any weird surprises, and installing new handlers + * should be easier. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +int distribute_irqs = 1; + +static inline void next_interrupt(struct pt_regs *regs) +{ + /* + * Softirq processing can enable/disable irqs, which will leave + * MSR[EE] enabled and the soft mask set to IRQS_DISABLED. Fix + * this up. + */ + if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) + hard_irq_disable(); + else + irq_soft_mask_set(IRQS_ALL_DISABLED); + + /* + * We are responding to the next interrupt, so interrupt-off + * latencies should be reset here. + */ + trace_hardirqs_on(); + trace_hardirqs_off(); +} + +static inline bool irq_happened_test_and_clear(u8 irq) +{ + if (local_paca->irq_happened & irq) { + local_paca->irq_happened &= ~irq; + return true; + } + return false; +} + +void replay_soft_interrupts(void) +{ + struct pt_regs regs; + + /* + * Be careful here, calling these interrupt handlers can cause + * softirqs to be raised, which they may run when calling irq_exit, + * which will cause local_irq_enable() to be run, which can then + * recurse into this function. Don't keep any state across + * interrupt handler calls which may change underneath us. + * + * Softirqs can not be disabled over replay to stop this recursion + * because interrupts taken in idle code may require RCU softirq + * to run in the irq RCU tracking context. This is a hard problem + * to fix without changes to the softirq or idle layer. + * + * We use local_paca rather than get_paca() to avoid all the + * debug_smp_processor_id() business in this low level function. + */ + + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) { + WARN_ON_ONCE(mfmsr() & MSR_EE); + WARN_ON(!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)); + } + + ppc_save_regs(®s); + regs.softe = IRQS_ENABLED; + regs.msr |= MSR_EE; + +again: + /* + * Force the delivery of pending soft-disabled interrupts on PS3. + * Any HV call will have this side effect. + */ + if (firmware_has_feature(FW_FEATURE_PS3_LV1)) { + u64 tmp, tmp2; + lv1_get_version_info(&tmp, &tmp2); + } + + /* + * Check if an hypervisor Maintenance interrupt happened. + * This is a higher priority interrupt than the others, so + * replay it first. + */ + if (IS_ENABLED(CONFIG_PPC_BOOK3S) && + irq_happened_test_and_clear(PACA_IRQ_HMI)) { + regs.trap = INTERRUPT_HMI; + handle_hmi_exception(®s); + next_interrupt(®s); + } + + if (irq_happened_test_and_clear(PACA_IRQ_DEC)) { + regs.trap = INTERRUPT_DECREMENTER; + timer_interrupt(®s); + next_interrupt(®s); + } + + if (irq_happened_test_and_clear(PACA_IRQ_EE)) { + regs.trap = INTERRUPT_EXTERNAL; + do_IRQ(®s); + next_interrupt(®s); + } + + if (IS_ENABLED(CONFIG_PPC_DOORBELL) && + irq_happened_test_and_clear(PACA_IRQ_DBELL)) { + regs.trap = INTERRUPT_DOORBELL; + doorbell_exception(®s); + next_interrupt(®s); + } + + /* Book3E does not support soft-masking PMI interrupts */ + if (IS_ENABLED(CONFIG_PPC_BOOK3S) && + irq_happened_test_and_clear(PACA_IRQ_PMI)) { + regs.trap = INTERRUPT_PERFMON; + performance_monitor_exception(®s); + next_interrupt(®s); + } + + /* + * Softirq processing can enable and disable interrupts, which can + * result in new irqs becoming pending. Must keep looping until we + * have cleared out all pending interrupts. + */ + if (local_paca->irq_happened & ~PACA_IRQ_HARD_DIS) + goto again; +} + +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_KUAP) +static inline void replay_soft_interrupts_irqrestore(void) +{ + unsigned long kuap_state = get_kuap(); + + /* + * Check if anything calls local_irq_enable/restore() when KUAP is + * disabled (user access enabled). We handle that case here by saving + * and re-locking AMR but we shouldn't get here in the first place, + * hence the warning. + */ + kuap_assert_locked(); + + if (kuap_state != AMR_KUAP_BLOCKED) + set_kuap(AMR_KUAP_BLOCKED); + + replay_soft_interrupts(); + + if (kuap_state != AMR_KUAP_BLOCKED) + set_kuap(kuap_state); +} +#else +#define replay_soft_interrupts_irqrestore() replay_soft_interrupts() +#endif + +notrace void arch_local_irq_restore(unsigned long mask) +{ + unsigned char irq_happened; + + /* Write the new soft-enabled value if it is a disable */ + if (mask) { + irq_soft_mask_set(mask); + return; + } + + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) + WARN_ON_ONCE(in_nmi() || in_hardirq()); + + /* + * After the stb, interrupts are unmasked and there are no interrupts + * pending replay. The restart sequence makes this atomic with + * respect to soft-masked interrupts. If this was just a simple code + * sequence, a soft-masked interrupt could become pending right after + * the comparison and before the stb. + * + * This allows interrupts to be unmasked without hard disabling, and + * also without new hard interrupts coming in ahead of pending ones. + */ + asm_volatile_goto( +"1: \n" +" lbz 9,%0(13) \n" +" cmpwi 9,0 \n" +" bne %l[happened] \n" +" stb 9,%1(13) \n" +"2: \n" + RESTART_TABLE(1b, 2b, 1b) + : : "i" (offsetof(struct paca_struct, irq_happened)), + "i" (offsetof(struct paca_struct, irq_soft_mask)) + : "cr0", "r9" + : happened); + + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) + WARN_ON_ONCE(!(mfmsr() & MSR_EE)); + + return; + +happened: + irq_happened = READ_ONCE(local_paca->irq_happened); + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) + WARN_ON_ONCE(!irq_happened); + + if (irq_happened == PACA_IRQ_HARD_DIS) { + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) + WARN_ON_ONCE(mfmsr() & MSR_EE); + irq_soft_mask_set(IRQS_ENABLED); + local_paca->irq_happened = 0; + __hard_irq_enable(); + return; + } + + /* Have interrupts to replay, need to hard disable first */ + if (!(irq_happened & PACA_IRQ_HARD_DIS)) { + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) { + if (!(mfmsr() & MSR_EE)) { + /* + * An interrupt could have come in and cleared + * MSR[EE] and set IRQ_HARD_DIS, so check + * IRQ_HARD_DIS again and warn if it is still + * clear. + */ + irq_happened = READ_ONCE(local_paca->irq_happened); + WARN_ON_ONCE(!(irq_happened & PACA_IRQ_HARD_DIS)); + } + } + __hard_irq_disable(); + local_paca->irq_happened |= PACA_IRQ_HARD_DIS; + } else { + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) { + if (WARN_ON_ONCE(mfmsr() & MSR_EE)) + __hard_irq_disable(); + } + } + + /* + * Disable preempt here, so that the below preempt_enable will + * perform resched if required (a replayed interrupt may set + * need_resched). + */ + preempt_disable(); + irq_soft_mask_set(IRQS_ALL_DISABLED); + trace_hardirqs_off(); + + replay_soft_interrupts_irqrestore(); + + trace_hardirqs_on(); + irq_soft_mask_set(IRQS_ENABLED); + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) + WARN_ON(local_paca->irq_happened != PACA_IRQ_HARD_DIS); + local_paca->irq_happened = 0; + __hard_irq_enable(); + preempt_enable(); +} +EXPORT_SYMBOL(arch_local_irq_restore); + +/* + * This is a helper to use when about to go into idle low-power + * when the latter has the side effect of re-enabling interrupts + * (such as calling H_CEDE under pHyp). + * + * You call this function with interrupts soft-disabled (this is + * already the case when ppc_md.power_save is called). The function + * will return whether to enter power save or just return. + * + * In the former case, it will have notified lockdep of interrupts + * being re-enabled and generally sanitized the lazy irq state, + * and in the latter case it will leave with interrupts hard + * disabled and marked as such, so the local_irq_enable() call + * in arch_cpu_idle() will properly re-enable everything. + */ +bool prep_irq_for_idle(void) +{ + /* + * First we need to hard disable to ensure no interrupt + * occurs before we effectively enter the low power state + */ + __hard_irq_disable(); + local_paca->irq_happened |= PACA_IRQ_HARD_DIS; + + /* + * If anything happened while we were soft-disabled, + * we return now and do not enter the low power state. + */ + if (lazy_irq_pending()) + return false; + + /* Tell lockdep we are about to re-enable */ + trace_hardirqs_on(); + + /* + * Mark interrupts as soft-enabled and clear the + * PACA_IRQ_HARD_DIS from the pending mask since we + * are about to hard enable as well as a side effect + * of entering the low power state. + */ + local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS; + irq_soft_mask_set(IRQS_ENABLED); + + /* Tell the caller to enter the low power state */ + return true; +} + +#ifdef CONFIG_PPC_BOOK3S +/* + * This is for idle sequences that return with IRQs off, but the + * idle state itself wakes on interrupt. Tell the irq tracer that + * IRQs are enabled for the duration of idle so it does not get long + * off times. Must be paired with fini_irq_for_idle_irqsoff. + */ +bool prep_irq_for_idle_irqsoff(void) +{ + WARN_ON(!irqs_disabled()); + + /* + * First we need to hard disable to ensure no interrupt + * occurs before we effectively enter the low power state + */ + __hard_irq_disable(); + local_paca->irq_happened |= PACA_IRQ_HARD_DIS; + + /* + * If anything happened while we were soft-disabled, + * we return now and do not enter the low power state. + */ + if (lazy_irq_pending()) + return false; + + /* Tell lockdep we are about to re-enable */ + trace_hardirqs_on(); + + return true; +} + +/* + * Take the SRR1 wakeup reason, index into this table to find the + * appropriate irq_happened bit. + * + * Sytem reset exceptions taken in idle state also come through here, + * but they are NMI interrupts so do not need to wait for IRQs to be + * restored, and should be taken as early as practical. These are marked + * with 0xff in the table. The Power ISA specifies 0100b as the system + * reset interrupt reason. + */ +#define IRQ_SYSTEM_RESET 0xff + +static const u8 srr1_to_lazyirq[0x10] = { + 0, 0, 0, + PACA_IRQ_DBELL, + IRQ_SYSTEM_RESET, + PACA_IRQ_DBELL, + PACA_IRQ_DEC, + 0, + PACA_IRQ_EE, + PACA_IRQ_EE, + PACA_IRQ_HMI, + 0, 0, 0, 0, 0 }; + +void replay_system_reset(void) +{ + struct pt_regs regs; + + ppc_save_regs(®s); + regs.trap = 0x100; + get_paca()->in_nmi = 1; + system_reset_exception(®s); + get_paca()->in_nmi = 0; +} +EXPORT_SYMBOL_GPL(replay_system_reset); + +void irq_set_pending_from_srr1(unsigned long srr1) +{ + unsigned int idx = (srr1 & SRR1_WAKEMASK_P8) >> 18; + u8 reason = srr1_to_lazyirq[idx]; + + /* + * Take the system reset now, which is immediately after registers + * are restored from idle. It's an NMI, so interrupts need not be + * re-enabled before it is taken. + */ + if (unlikely(reason == IRQ_SYSTEM_RESET)) { + replay_system_reset(); + return; + } + + if (reason == PACA_IRQ_DBELL) { + /* + * When doorbell triggers a system reset wakeup, the message + * is not cleared, so if the doorbell interrupt is replayed + * and the IPI handled, the doorbell interrupt would still + * fire when EE is enabled. + * + * To avoid taking the superfluous doorbell interrupt, + * execute a msgclr here before the interrupt is replayed. + */ + ppc_msgclr(PPC_DBELL_MSGTYPE); + } + + /* + * The 0 index (SRR1[42:45]=b0000) must always evaluate to 0, + * so this can be called unconditionally with the SRR1 wake + * reason as returned by the idle code, which uses 0 to mean no + * interrupt. + * + * If a future CPU was to designate this as an interrupt reason, + * then a new index for no interrupt must be assigned. + */ + local_paca->irq_happened |= reason; +} +#endif /* CONFIG_PPC_BOOK3S */ + +/* + * Force a replay of the external interrupt handler on this CPU. + */ +void force_external_irq_replay(void) +{ + /* + * This must only be called with interrupts soft-disabled, + * the replay will happen when re-enabling. + */ + WARN_ON(!arch_irqs_disabled()); + + /* + * Interrupts must always be hard disabled before irq_happened is + * modified (to prevent lost update in case of interrupt between + * load and store). + */ + __hard_irq_disable(); + local_paca->irq_happened |= PACA_IRQ_HARD_DIS; + + /* Indicate in the PACA that we have an interrupt to replay */ + local_paca->irq_happened |= PACA_IRQ_EE; +} + +static int __init setup_noirqdistrib(char *str) +{ + distribute_irqs = 0; + return 1; +} + +__setup("noirqdistrib", setup_noirqdistrib); -- cgit v1.2.3