From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/kernel/pci_of_scan.c | 447 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 447 insertions(+) create mode 100644 arch/powerpc/kernel/pci_of_scan.c (limited to 'arch/powerpc/kernel/pci_of_scan.c') diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c new file mode 100644 index 000000000..756043dd0 --- /dev/null +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -0,0 +1,447 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Helper routines to scan the device tree for PCI devices and busses + * + * Migrated out of PowerPC architecture pci_64.c file by Grant Likely + * so that these routines are available for + * 32 bit also. + * + * Copyright (C) 2003 Anton Blanchard , IBM + * Rework, based on alpha PCI code. + * Copyright (c) 2009 Secret Lab Technologies Ltd. + */ + +#include +#include +#include +#include + +/** + * get_int_prop - Decode a u32 from a device tree property + */ +static u32 get_int_prop(struct device_node *np, const char *name, u32 def) +{ + const __be32 *prop; + int len; + + prop = of_get_property(np, name, &len); + if (prop && len >= 4) + return of_read_number(prop, 1); + return def; +} + +/** + * pci_parse_of_flags - Parse the flags cell of a device tree PCI address + * @addr0: value of 1st cell of a device tree PCI address. + * @bridge: Set this flag if the address is from a bridge 'ranges' property + * + * PCI Bus Binding to IEEE Std 1275-1994 + * + * Bit# 33222222 22221111 11111100 00000000 + * 10987654 32109876 54321098 76543210 + * phys.hi cell: npt000ss bbbbbbbb dddddfff rrrrrrrr + * phys.mid cell: hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh + * phys.lo cell: llllllll llllllll llllllll llllllll + * + * where: + * n is 0 if the address is relocatable, 1 otherwise + * p is 1 if the addressable region is "prefetchable", 0 otherwise + * t is 1 if the address is aliased (for non-relocatable I/O), + * below 1 MB (for Memory),or below 64 KB (for relocatable I/O). + * ss is the space code, denoting the address space: + * 00 denotes Configuration Space + * 01 denotes I/O Space + * 10 denotes 32-bit-address Memory Space + * 11 denotes 64-bit-address Memory Space + * bbbbbbbb is the 8-bit Bus Number + * ddddd is the 5-bit Device Number + * fff is the 3-bit Function Number + * rrrrrrrr is the 8-bit Register Number + */ +#define OF_PCI_ADDR0_SPACE(ss) (((ss)&3)<<24) +#define OF_PCI_ADDR0_SPACE_CFG OF_PCI_ADDR0_SPACE(0) +#define OF_PCI_ADDR0_SPACE_IO OF_PCI_ADDR0_SPACE(1) +#define OF_PCI_ADDR0_SPACE_MMIO32 OF_PCI_ADDR0_SPACE(2) +#define OF_PCI_ADDR0_SPACE_MMIO64 OF_PCI_ADDR0_SPACE(3) +#define OF_PCI_ADDR0_SPACE_MASK OF_PCI_ADDR0_SPACE(3) +#define OF_PCI_ADDR0_RELOC (1UL<<31) +#define OF_PCI_ADDR0_PREFETCH (1UL<<30) +#define OF_PCI_ADDR0_ALIAS (1UL<<29) +#define OF_PCI_ADDR0_BUS 0x00FF0000UL +#define OF_PCI_ADDR0_DEV 0x0000F800UL +#define OF_PCI_ADDR0_FN 0x00000700UL +#define OF_PCI_ADDR0_BARREG 0x000000FFUL + +unsigned int pci_parse_of_flags(u32 addr0, int bridge) +{ + unsigned int flags = 0, as = addr0 & OF_PCI_ADDR0_SPACE_MASK; + + if (as == OF_PCI_ADDR0_SPACE_MMIO32 || as == OF_PCI_ADDR0_SPACE_MMIO64) { + flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; + + if (as == OF_PCI_ADDR0_SPACE_MMIO64) + flags |= PCI_BASE_ADDRESS_MEM_TYPE_64 | IORESOURCE_MEM_64; + + if (addr0 & OF_PCI_ADDR0_ALIAS) + flags |= PCI_BASE_ADDRESS_MEM_TYPE_1M; + + if (addr0 & OF_PCI_ADDR0_PREFETCH) + flags |= IORESOURCE_PREFETCH | + PCI_BASE_ADDRESS_MEM_PREFETCH; + + /* Note: We don't know whether the ROM has been left enabled + * by the firmware or not. We mark it as disabled (ie, we do + * not set the IORESOURCE_ROM_ENABLE flag) for now rather than + * do a config space read, it will be force-enabled if needed + */ + if (!bridge && (addr0 & OF_PCI_ADDR0_BARREG) == PCI_ROM_ADDRESS) + flags |= IORESOURCE_READONLY; + + } else if (as == OF_PCI_ADDR0_SPACE_IO) + flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + + if (flags) + flags |= IORESOURCE_SIZEALIGN; + + return flags; +} + +/** + * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node + * @node: device tree node for the PCI device + * @dev: pci_dev structure for the device + * + * This function parses the 'assigned-addresses' property of a PCI devices' + * device tree node and writes them into the associated pci_dev structure. + */ +static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev) +{ + u64 base, size; + unsigned int flags; + struct pci_bus_region region; + struct resource *res; + const __be32 *addrs; + u32 i; + int proplen; + bool mark_unset = false; + + addrs = of_get_property(node, "assigned-addresses", &proplen); + if (!addrs || !proplen) { + addrs = of_get_property(node, "reg", &proplen); + if (!addrs || !proplen) + return; + mark_unset = true; + } + + pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); + for (; proplen >= 20; proplen -= 20, addrs += 5) { + flags = pci_parse_of_flags(of_read_number(addrs, 1), 0); + if (!flags) + continue; + base = of_read_number(&addrs[1], 2); + size = of_read_number(&addrs[3], 2); + if (!size) + continue; + i = of_read_number(addrs, 1) & 0xff; + pr_debug(" base: %llx, size: %llx, i: %x\n", + (unsigned long long)base, + (unsigned long long)size, i); + + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { + res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; + } else if (i == dev->rom_base_reg) { + res = &dev->resource[PCI_ROM_RESOURCE]; + flags |= IORESOURCE_READONLY; + } else { + printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); + continue; + } + res->flags = flags; + if (mark_unset) + res->flags |= IORESOURCE_UNSET; + res->name = pci_name(dev); + region.start = base; + region.end = base + size - 1; + pcibios_bus_to_resource(dev->bus, res, ®ion); + } +} + +/** + * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev + * @node: device tree node pointer + * @bus: bus the device is sitting on + * @devfn: PCI function number, extracted from device tree by caller. + */ +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) +{ + struct pci_dev *dev; + + dev = pci_alloc_dev(bus); + if (!dev) + return NULL; + + pr_debug(" create device, devfn: %x, type: %s\n", devfn, + of_node_get_device_type(node)); + + dev->dev.of_node = of_node_get(node); + dev->dev.parent = bus->bridge; + dev->dev.bus = &pci_bus_type; + dev->devfn = devfn; + dev->multifunction = 0; /* maybe a lie? */ + dev->needs_freset = 0; /* pcie fundamental reset required */ + set_pcie_port_type(dev); + + pci_dev_assign_slot(dev); + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); + dev->device = get_int_prop(node, "device-id", 0xffff); + dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); + dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); + + dev->cfg_size = pci_cfg_space_size(dev); + + dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + dev->class = get_int_prop(node, "class-code", 0); + dev->revision = get_int_prop(node, "revision-id", 0); + + pr_debug(" class: 0x%x\n", dev->class); + pr_debug(" revision: 0x%x\n", dev->revision); + + dev->current_state = PCI_UNKNOWN; /* unknown power state */ + dev->error_state = pci_channel_io_normal; + dev->dma_mask = 0xffffffff; + + /* Early fixups, before probing the BARs */ + pci_fixup_device(pci_fixup_early, dev); + + if (of_node_is_type(node, "pci") || of_node_is_type(node, "pciex")) { + /* a PCI-PCI bridge */ + dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; + dev->rom_base_reg = PCI_ROM_ADDRESS1; + set_pcie_hotplug_bridge(dev); + } else if (of_node_is_type(node, "cardbus")) { + dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; + } else { + dev->hdr_type = PCI_HEADER_TYPE_NORMAL; + dev->rom_base_reg = PCI_ROM_ADDRESS; + /* Maybe do a default OF mapping here */ + dev->irq = 0; + } + + of_pci_parse_addrs(node, dev); + + pr_debug(" adding to system ...\n"); + + pci_device_add(dev, bus); + + return dev; +} +EXPORT_SYMBOL(of_create_pci_dev); + +/** + * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes + * @dev: pci_dev structure for the bridge + * + * of_scan_bus() calls this routine for each PCI bridge that it finds, and + * this routine in turn call of_scan_bus() recursively to scan for more child + * devices. + */ +void of_scan_pci_bridge(struct pci_dev *dev) +{ + struct device_node *node = dev->dev.of_node; + struct pci_bus *bus; + struct pci_controller *phb; + const __be32 *busrange, *ranges; + int len, i, mode; + struct pci_bus_region region; + struct resource *res; + unsigned int flags; + u64 size; + + pr_debug("of_scan_pci_bridge(%pOF)\n", node); + + /* parse bus-range property */ + busrange = of_get_property(node, "bus-range", &len); + if (busrange == NULL || len != 8) { + printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %pOF\n", + node); + return; + } + ranges = of_get_property(node, "ranges", &len); + if (ranges == NULL) { + printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %pOF\n", + node); + return; + } + + bus = pci_find_bus(pci_domain_nr(dev->bus), + of_read_number(busrange, 1)); + if (!bus) { + bus = pci_add_new_bus(dev->bus, dev, + of_read_number(busrange, 1)); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %pOF\n", + node); + return; + } + } + + bus->primary = dev->bus->number; + pci_bus_insert_busn_res(bus, of_read_number(busrange, 1), + of_read_number(busrange+1, 1)); + bus->bridge_ctl = 0; + + /* parse ranges property */ + /* PCI #address-cells == 3 and #size-cells == 2 always */ + res = &dev->resource[PCI_BRIDGE_RESOURCES]; + for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { + res->flags = 0; + bus->resource[i] = res; + ++res; + } + i = 1; + for (; len >= 32; len -= 32, ranges += 8) { + flags = pci_parse_of_flags(of_read_number(ranges, 1), 1); + size = of_read_number(&ranges[6], 2); + if (flags == 0 || size == 0) + continue; + if (flags & IORESOURCE_IO) { + res = bus->resource[0]; + if (res->flags) { + printk(KERN_ERR "PCI: ignoring extra I/O range" + " for bridge %pOF\n", node); + continue; + } + } else { + if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { + printk(KERN_ERR "PCI: too many memory ranges" + " for bridge %pOF\n", node); + continue; + } + res = bus->resource[i]; + ++i; + } + res->flags = flags; + region.start = of_read_number(&ranges[1], 2); + region.end = region.start + size - 1; + pcibios_bus_to_resource(dev->bus, res, ®ion); + } + sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), + bus->number); + pr_debug(" bus name: %s\n", bus->name); + + phb = pci_bus_to_host(bus); + + mode = PCI_PROBE_NORMAL; + if (phb->controller_ops.probe_mode) + mode = phb->controller_ops.probe_mode(bus); + pr_debug(" probe mode: %d\n", mode); + + if (mode == PCI_PROBE_DEVTREE) + of_scan_bus(node, bus); + else if (mode == PCI_PROBE_NORMAL) + pci_scan_child_bus(bus); +} +EXPORT_SYMBOL(of_scan_pci_bridge); + +static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus, + struct device_node *dn) +{ + struct pci_dev *dev = NULL; + const __be32 *reg; + int reglen, devfn; +#ifdef CONFIG_EEH + struct eeh_dev *edev = pdn_to_eeh_dev(PCI_DN(dn)); +#endif + + pr_debug(" * %pOF\n", dn); + if (!of_device_is_available(dn)) + return NULL; + + reg = of_get_property(dn, "reg", ®len); + if (reg == NULL || reglen < 20) + return NULL; + devfn = (of_read_number(reg, 1) >> 8) & 0xff; + + /* Check if the PCI device is already there */ + dev = pci_get_slot(bus, devfn); + if (dev) { + pci_dev_put(dev); + return dev; + } + + /* Device removed permanently ? */ +#ifdef CONFIG_EEH + if (edev && (edev->mode & EEH_DEV_REMOVED)) + return NULL; +#endif + + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(dn, bus, devfn); + if (!dev) + return NULL; + + pr_debug(" dev header type: %x\n", dev->hdr_type); + return dev; +} + +/** + * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * @rescan_existing: Flag indicating bus has already been set up + */ +static void __of_scan_bus(struct device_node *node, struct pci_bus *bus, + int rescan_existing) +{ + struct device_node *child; + struct pci_dev *dev; + + pr_debug("of_scan_bus(%pOF) bus no %d...\n", + node, bus->number); + + /* Scan direct children */ + for_each_child_of_node(node, child) { + dev = of_scan_pci_dev(bus, child); + if (!dev) + continue; + pr_debug(" dev header type: %x\n", dev->hdr_type); + } + + /* Apply all fixups necessary. We don't fixup the bus "self" + * for an existing bridge that is being rescanned + */ + if (!rescan_existing) + pcibios_setup_bus_self(bus); + + /* Now scan child busses */ + for_each_pci_bridge(dev, bus) + of_scan_pci_bridge(dev); +} + +/** + * of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + */ +void of_scan_bus(struct device_node *node, struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 0); +} +EXPORT_SYMBOL_GPL(of_scan_bus); + +/** + * of_rescan_bus - given a PCI bus node, scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * + * Same as of_scan_bus, but for a pci_bus structure that has already been + * setup. + */ +void of_rescan_bus(struct device_node *node, struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 1); +} +EXPORT_SYMBOL_GPL(of_rescan_bus); + -- cgit v1.2.3