From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/kernel/ptrace/ptrace-adv.c | 494 ++++++++++++++++++++++++++++++++ 1 file changed, 494 insertions(+) create mode 100644 arch/powerpc/kernel/ptrace/ptrace-adv.c (limited to 'arch/powerpc/kernel/ptrace/ptrace-adv.c') diff --git a/arch/powerpc/kernel/ptrace/ptrace-adv.c b/arch/powerpc/kernel/ptrace/ptrace-adv.c new file mode 100644 index 000000000..399f5d94a --- /dev/null +++ b/arch/powerpc/kernel/ptrace/ptrace-adv.c @@ -0,0 +1,494 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include +#include + +#include "ptrace-decl.h" + +void user_enable_single_step(struct task_struct *task) +{ + struct pt_regs *regs = task->thread.regs; + + if (regs != NULL) { + task->thread.debug.dbcr0 &= ~DBCR0_BT; + task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC; + regs_set_return_msr(regs, regs->msr | MSR_DE); + } + set_tsk_thread_flag(task, TIF_SINGLESTEP); +} + +void user_enable_block_step(struct task_struct *task) +{ + struct pt_regs *regs = task->thread.regs; + + if (regs != NULL) { + task->thread.debug.dbcr0 &= ~DBCR0_IC; + task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT; + regs_set_return_msr(regs, regs->msr | MSR_DE); + } + set_tsk_thread_flag(task, TIF_SINGLESTEP); +} + +void user_disable_single_step(struct task_struct *task) +{ + struct pt_regs *regs = task->thread.regs; + + if (regs != NULL) { + /* + * The logic to disable single stepping should be as + * simple as turning off the Instruction Complete flag. + * And, after doing so, if all debug flags are off, turn + * off DBCR0(IDM) and MSR(DE) .... Torez + */ + task->thread.debug.dbcr0 &= ~(DBCR0_IC | DBCR0_BT); + /* + * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set. + */ + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, + task->thread.debug.dbcr1)) { + /* + * All debug events were off..... + */ + task->thread.debug.dbcr0 &= ~DBCR0_IDM; + regs_set_return_msr(regs, regs->msr & ~MSR_DE); + } + } + clear_tsk_thread_flag(task, TIF_SINGLESTEP); +} + +void ppc_gethwdinfo(struct ppc_debug_info *dbginfo) +{ + dbginfo->version = 1; + dbginfo->num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS; + dbginfo->num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS; + dbginfo->num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS; + dbginfo->data_bp_alignment = 4; + dbginfo->sizeof_condition = 4; + dbginfo->features = PPC_DEBUG_FEATURE_INSN_BP_RANGE | + PPC_DEBUG_FEATURE_INSN_BP_MASK; + if (IS_ENABLED(CONFIG_PPC_ADV_DEBUG_DAC_RANGE)) + dbginfo->features |= PPC_DEBUG_FEATURE_DATA_BP_RANGE | + PPC_DEBUG_FEATURE_DATA_BP_MASK; +} + +int ptrace_get_debugreg(struct task_struct *child, unsigned long addr, + unsigned long __user *datalp) +{ + /* We only support one DABR and no IABRS at the moment */ + if (addr > 0) + return -EINVAL; + return put_user(child->thread.debug.dac1, datalp); +} + +int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data) +{ + struct pt_regs *regs = task->thread.regs; +#ifdef CONFIG_HAVE_HW_BREAKPOINT + int ret; + struct thread_struct *thread = &task->thread; + struct perf_event *bp; + struct perf_event_attr attr; +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + + /* For ppc64 we support one DABR and no IABR's at the moment (ppc64). + * For embedded processors we support one DAC and no IAC's at the + * moment. + */ + if (addr > 0) + return -EINVAL; + + /* The bottom 3 bits in dabr are flags */ + if ((data & ~0x7UL) >= TASK_SIZE) + return -EIO; + + /* As described above, it was assumed 3 bits were passed with the data + * address, but we will assume only the mode bits will be passed + * as to not cause alignment restrictions for DAC-based processors. + */ + + /* DAC's hold the whole address without any mode flags */ + task->thread.debug.dac1 = data & ~0x3UL; + + if (task->thread.debug.dac1 == 0) { + dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W); + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, + task->thread.debug.dbcr1)) { + regs_set_return_msr(regs, regs->msr & ~MSR_DE); + task->thread.debug.dbcr0 &= ~DBCR0_IDM; + } + return 0; + } + + /* Read or Write bits must be set */ + + if (!(data & 0x3UL)) + return -EINVAL; + + /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 register */ + task->thread.debug.dbcr0 |= DBCR0_IDM; + + /* Check for write and read flags and set DBCR0 accordingly */ + dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W); + if (data & 0x1UL) + dbcr_dac(task) |= DBCR_DAC1R; + if (data & 0x2UL) + dbcr_dac(task) |= DBCR_DAC1W; + regs_set_return_msr(regs, regs->msr | MSR_DE); + return 0; +} + +static long set_instruction_bp(struct task_struct *child, + struct ppc_hw_breakpoint *bp_info) +{ + int slot; + int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0); + int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0); + int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0); + int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0); + + if (dbcr_iac_range(child) & DBCR_IAC12MODE) + slot2_in_use = 1; + if (dbcr_iac_range(child) & DBCR_IAC34MODE) + slot4_in_use = 1; + + if (bp_info->addr >= TASK_SIZE) + return -EIO; + + if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) { + /* Make sure range is valid. */ + if (bp_info->addr2 >= TASK_SIZE) + return -EIO; + + /* We need a pair of IAC regsisters */ + if (!slot1_in_use && !slot2_in_use) { + slot = 1; + child->thread.debug.iac1 = bp_info->addr; + child->thread.debug.iac2 = bp_info->addr2; + child->thread.debug.dbcr0 |= DBCR0_IAC1; + if (bp_info->addr_mode == + PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) + dbcr_iac_range(child) |= DBCR_IAC12X; + else + dbcr_iac_range(child) |= DBCR_IAC12I; +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + } else if ((!slot3_in_use) && (!slot4_in_use)) { + slot = 3; + child->thread.debug.iac3 = bp_info->addr; + child->thread.debug.iac4 = bp_info->addr2; + child->thread.debug.dbcr0 |= DBCR0_IAC3; + if (bp_info->addr_mode == + PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) + dbcr_iac_range(child) |= DBCR_IAC34X; + else + dbcr_iac_range(child) |= DBCR_IAC34I; +#endif + } else { + return -ENOSPC; + } + } else { + /* We only need one. If possible leave a pair free in + * case a range is needed later + */ + if (!slot1_in_use) { + /* + * Don't use iac1 if iac1-iac2 are free and either + * iac3 or iac4 (but not both) are free + */ + if (slot2_in_use || slot3_in_use == slot4_in_use) { + slot = 1; + child->thread.debug.iac1 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC1; + goto out; + } + } + if (!slot2_in_use) { + slot = 2; + child->thread.debug.iac2 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC2; +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + } else if (!slot3_in_use) { + slot = 3; + child->thread.debug.iac3 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC3; + } else if (!slot4_in_use) { + slot = 4; + child->thread.debug.iac4 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC4; +#endif + } else { + return -ENOSPC; + } + } +out: + child->thread.debug.dbcr0 |= DBCR0_IDM; + regs_set_return_msr(child->thread.regs, child->thread.regs->msr | MSR_DE); + + return slot; +} + +static int del_instruction_bp(struct task_struct *child, int slot) +{ + switch (slot) { + case 1: + if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0) + return -ENOENT; + + if (dbcr_iac_range(child) & DBCR_IAC12MODE) { + /* address range - clear slots 1 & 2 */ + child->thread.debug.iac2 = 0; + dbcr_iac_range(child) &= ~DBCR_IAC12MODE; + } + child->thread.debug.iac1 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC1; + break; + case 2: + if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0) + return -ENOENT; + + if (dbcr_iac_range(child) & DBCR_IAC12MODE) + /* used in a range */ + return -EINVAL; + child->thread.debug.iac2 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC2; + break; +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + case 3: + if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0) + return -ENOENT; + + if (dbcr_iac_range(child) & DBCR_IAC34MODE) { + /* address range - clear slots 3 & 4 */ + child->thread.debug.iac4 = 0; + dbcr_iac_range(child) &= ~DBCR_IAC34MODE; + } + child->thread.debug.iac3 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC3; + break; + case 4: + if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0) + return -ENOENT; + + if (dbcr_iac_range(child) & DBCR_IAC34MODE) + /* Used in a range */ + return -EINVAL; + child->thread.debug.iac4 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC4; + break; +#endif + default: + return -EINVAL; + } + return 0; +} + +static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) +{ + int byte_enable = + (bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT) + & 0xf; + int condition_mode = + bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE; + int slot; + + if (byte_enable && condition_mode == 0) + return -EINVAL; + + if (bp_info->addr >= TASK_SIZE) + return -EIO; + + if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) { + slot = 1; + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) + dbcr_dac(child) |= DBCR_DAC1R; + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) + dbcr_dac(child) |= DBCR_DAC1W; + child->thread.debug.dac1 = (unsigned long)bp_info->addr; +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + if (byte_enable) { + child->thread.debug.dvc1 = + (unsigned long)bp_info->condition_value; + child->thread.debug.dbcr2 |= + ((byte_enable << DBCR2_DVC1BE_SHIFT) | + (condition_mode << DBCR2_DVC1M_SHIFT)); + } +#endif +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { + /* Both dac1 and dac2 are part of a range */ + return -ENOSPC; +#endif + } else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) { + slot = 2; + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) + dbcr_dac(child) |= DBCR_DAC2R; + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) + dbcr_dac(child) |= DBCR_DAC2W; + child->thread.debug.dac2 = (unsigned long)bp_info->addr; +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + if (byte_enable) { + child->thread.debug.dvc2 = + (unsigned long)bp_info->condition_value; + child->thread.debug.dbcr2 |= + ((byte_enable << DBCR2_DVC2BE_SHIFT) | + (condition_mode << DBCR2_DVC2M_SHIFT)); + } +#endif + } else { + return -ENOSPC; + } + child->thread.debug.dbcr0 |= DBCR0_IDM; + regs_set_return_msr(child->thread.regs, child->thread.regs->msr | MSR_DE); + + return slot + 4; +} + +static int del_dac(struct task_struct *child, int slot) +{ + if (slot == 1) { + if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) + return -ENOENT; + + child->thread.debug.dac1 = 0; + dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W); +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { + child->thread.debug.dac2 = 0; + child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE; + } + child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); +#endif +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + child->thread.debug.dvc1 = 0; +#endif + } else if (slot == 2) { + if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) + return -ENOENT; + +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) + /* Part of a range */ + return -EINVAL; + child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); +#endif +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + child->thread.debug.dvc2 = 0; +#endif + child->thread.debug.dac2 = 0; + dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W); + } else { + return -EINVAL; + } + + return 0; +} + +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE +static int set_dac_range(struct task_struct *child, + struct ppc_hw_breakpoint *bp_info) +{ + int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK; + + /* We don't allow range watchpoints to be used with DVC */ + if (bp_info->condition_mode) + return -EINVAL; + + /* + * Best effort to verify the address range. The user/supervisor bits + * prevent trapping in kernel space, but let's fail on an obvious bad + * range. The simple test on the mask is not fool-proof, and any + * exclusive range will spill over into kernel space. + */ + if (bp_info->addr >= TASK_SIZE) + return -EIO; + if (mode == PPC_BREAKPOINT_MODE_MASK) { + /* + * dac2 is a bitmask. Don't allow a mask that makes a + * kernel space address from a valid dac1 value + */ + if (~((unsigned long)bp_info->addr2) >= TASK_SIZE) + return -EIO; + } else { + /* + * For range breakpoints, addr2 must also be a valid address + */ + if (bp_info->addr2 >= TASK_SIZE) + return -EIO; + } + + if (child->thread.debug.dbcr0 & + (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W)) + return -ENOSPC; + + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) + child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) + child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); + child->thread.debug.dac1 = bp_info->addr; + child->thread.debug.dac2 = bp_info->addr2; + if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) + child->thread.debug.dbcr2 |= DBCR2_DAC12M; + else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) + child->thread.debug.dbcr2 |= DBCR2_DAC12MX; + else /* PPC_BREAKPOINT_MODE_MASK */ + child->thread.debug.dbcr2 |= DBCR2_DAC12MM; + regs_set_return_msr(child->thread.regs, child->thread.regs->msr | MSR_DE); + + return 5; +} +#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */ + +long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) +{ + if (bp_info->version != 1) + return -ENOTSUPP; + /* + * Check for invalid flags and combinations + */ + if (bp_info->trigger_type == 0 || + (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE | + PPC_BREAKPOINT_TRIGGER_RW)) || + (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) || + (bp_info->condition_mode & + ~(PPC_BREAKPOINT_CONDITION_MODE | + PPC_BREAKPOINT_CONDITION_BE_ALL))) + return -EINVAL; +#if CONFIG_PPC_ADV_DEBUG_DVCS == 0 + if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE) + return -EINVAL; +#endif + + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) { + if (bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE || + bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE) + return -EINVAL; + return set_instruction_bp(child, bp_info); + } + if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT) + return set_dac(child, bp_info); + +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + return set_dac_range(child, bp_info); +#else + return -EINVAL; +#endif +} + +long ppc_del_hwdebug(struct task_struct *child, long data) +{ + int rc; + + if (data <= 4) + rc = del_instruction_bp(child, (int)data); + else + rc = del_dac(child, (int)data - 4); + + if (!rc) { + if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0, + child->thread.debug.dbcr1)) { + child->thread.debug.dbcr0 &= ~DBCR0_IDM; + regs_set_return_msr(child->thread.regs, + child->thread.regs->msr & ~MSR_DE); + } + } + return rc; +} -- cgit v1.2.3