From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/kexec/crash.c | 394 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 394 insertions(+) create mode 100644 arch/powerpc/kexec/crash.c (limited to 'arch/powerpc/kexec/crash.c') diff --git a/arch/powerpc/kexec/crash.c b/arch/powerpc/kexec/crash.c new file mode 100644 index 000000000..252724ed6 --- /dev/null +++ b/arch/powerpc/kexec/crash.c @@ -0,0 +1,394 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Architecture specific (PPC64) functions for kexec based crash dumps. + * + * Copyright (C) 2005, IBM Corp. + * + * Created by: Haren Myneni + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +/* + * The primary CPU waits a while for all secondary CPUs to enter. This is to + * avoid sending an IPI if the secondary CPUs are entering + * crash_kexec_secondary on their own (eg via a system reset). + * + * The secondary timeout has to be longer than the primary. Both timeouts are + * in milliseconds. + */ +#define PRIMARY_TIMEOUT 500 +#define SECONDARY_TIMEOUT 1000 + +#define IPI_TIMEOUT 10000 +#define REAL_MODE_TIMEOUT 10000 + +static int time_to_dump; + +/* + * In case of system reset, secondary CPUs enter crash_kexec_secondary with out + * having to send an IPI explicitly. So, indicate if the crash is via + * system reset to avoid sending another IPI. + */ +static int is_via_system_reset; + +/* + * crash_wake_offline should be set to 1 by platforms that intend to wake + * up offline cpus prior to jumping to a kdump kernel. Currently powernv + * sets it to 1, since we want to avoid things from happening when an + * offline CPU wakes up due to something like an HMI (malfunction error), + * which propagates to all threads. + */ +int crash_wake_offline; + +#define CRASH_HANDLER_MAX 3 +/* List of shutdown handles */ +static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX]; +static DEFINE_SPINLOCK(crash_handlers_lock); + +static unsigned long crash_shutdown_buf[JMP_BUF_LEN]; +static int crash_shutdown_cpu = -1; + +static int handle_fault(struct pt_regs *regs) +{ + if (crash_shutdown_cpu == smp_processor_id()) + longjmp(crash_shutdown_buf, 1); + return 0; +} + +#ifdef CONFIG_SMP + +static atomic_t cpus_in_crash; +void crash_ipi_callback(struct pt_regs *regs) +{ + static cpumask_t cpus_state_saved = CPU_MASK_NONE; + + int cpu = smp_processor_id(); + + hard_irq_disable(); + if (!cpumask_test_cpu(cpu, &cpus_state_saved)) { + crash_save_cpu(regs, cpu); + cpumask_set_cpu(cpu, &cpus_state_saved); + } + + atomic_inc(&cpus_in_crash); + smp_mb__after_atomic(); + + /* + * Starting the kdump boot. + * This barrier is needed to make sure that all CPUs are stopped. + */ + while (!time_to_dump) + cpu_relax(); + + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(1, 1); + +#ifdef CONFIG_PPC64 + kexec_smp_wait(); +#else + for (;;); /* FIXME */ +#endif + + /* NOTREACHED */ +} + +static void crash_kexec_prepare_cpus(void) +{ + unsigned int msecs; + volatile unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ + volatile int tries = 0; + int (*old_handler)(struct pt_regs *regs); + + printk(KERN_EMERG "Sending IPI to other CPUs\n"); + + if (crash_wake_offline) + ncpus = num_present_cpus() - 1; + + /* + * If we came in via system reset, secondaries enter via crash_kexec_secondary(). + * So, wait a while for the secondary CPUs to enter for that case. + * Else, send IPI to all other CPUs. + */ + if (is_via_system_reset) + mdelay(PRIMARY_TIMEOUT); + else + crash_send_ipi(crash_ipi_callback); + smp_wmb(); + +again: + /* + * FIXME: Until we will have the way to stop other CPUs reliably, + * the crash CPU will send an IPI and wait for other CPUs to + * respond. + */ + msecs = IPI_TIMEOUT; + while ((atomic_read(&cpus_in_crash) < ncpus) && (--msecs > 0)) + mdelay(1); + + /* Would it be better to replace the trap vector here? */ + + if (atomic_read(&cpus_in_crash) >= ncpus) { + printk(KERN_EMERG "IPI complete\n"); + return; + } + + printk(KERN_EMERG "ERROR: %d cpu(s) not responding\n", + ncpus - atomic_read(&cpus_in_crash)); + + /* + * If we have a panic timeout set then we can't wait indefinitely + * for someone to activate system reset. We also give up on the + * second time through if system reset fail to work. + */ + if ((panic_timeout > 0) || (tries > 0)) + return; + + /* + * A system reset will cause all CPUs to take an 0x100 exception. + * The primary CPU returns here via setjmp, and the secondary + * CPUs reexecute the crash_kexec_secondary path. + */ + old_handler = __debugger; + __debugger = handle_fault; + crash_shutdown_cpu = smp_processor_id(); + + if (setjmp(crash_shutdown_buf) == 0) { + printk(KERN_EMERG "Activate system reset (dumprestart) " + "to stop other cpu(s)\n"); + + /* + * A system reset will force all CPUs to execute the + * crash code again. We need to reset cpus_in_crash so we + * wait for everyone to do this. + */ + atomic_set(&cpus_in_crash, 0); + smp_mb(); + + while (atomic_read(&cpus_in_crash) < ncpus) + cpu_relax(); + } + + crash_shutdown_cpu = -1; + __debugger = old_handler; + + tries++; + goto again; +} + +/* + * This function will be called by secondary cpus. + */ +void crash_kexec_secondary(struct pt_regs *regs) +{ + unsigned long flags; + int msecs = SECONDARY_TIMEOUT; + + local_irq_save(flags); + + /* Wait for the primary crash CPU to signal its progress */ + while (crashing_cpu < 0) { + if (--msecs < 0) { + /* No response, kdump image may not have been loaded */ + local_irq_restore(flags); + return; + } + + mdelay(1); + } + + crash_ipi_callback(regs); +} + +#else /* ! CONFIG_SMP */ + +static void crash_kexec_prepare_cpus(void) +{ + /* + * move the secondaries to us so that we can copy + * the new kernel 0-0x100 safely + * + * do this if kexec in setup.c ? + */ +#ifdef CONFIG_PPC64 + smp_release_cpus(); +#else + /* FIXME */ +#endif +} + +void crash_kexec_secondary(struct pt_regs *regs) +{ +} +#endif /* CONFIG_SMP */ + +/* wait for all the CPUs to hit real mode but timeout if they don't come in */ +#if defined(CONFIG_SMP) && defined(CONFIG_PPC64) +noinstr static void __maybe_unused crash_kexec_wait_realmode(int cpu) +{ + unsigned int msecs; + int i; + + msecs = REAL_MODE_TIMEOUT; + for (i=0; i < nr_cpu_ids && msecs > 0; i++) { + if (i == cpu) + continue; + + while (paca_ptrs[i]->kexec_state < KEXEC_STATE_REAL_MODE) { + barrier(); + if (!cpu_possible(i) || !cpu_online(i) || (msecs <= 0)) + break; + msecs--; + mdelay(1); + } + } + mb(); +} +#else +static inline void crash_kexec_wait_realmode(int cpu) {} +#endif /* CONFIG_SMP && CONFIG_PPC64 */ + +void crash_kexec_prepare(void) +{ + /* Avoid hardlocking with irresponsive CPU holding logbuf_lock */ + printk_deferred_enter(); + + /* + * This function is only called after the system + * has panicked or is otherwise in a critical state. + * The minimum amount of code to allow a kexec'd kernel + * to run successfully needs to happen here. + * + * In practice this means stopping other cpus in + * an SMP system. + * The kernel is broken so disable interrupts. + */ + hard_irq_disable(); + + /* + * Make a note of crashing cpu. Will be used in machine_kexec + * such that another IPI will not be sent. + */ + crashing_cpu = smp_processor_id(); + + crash_kexec_prepare_cpus(); +} + +/* + * Register a function to be called on shutdown. Only use this if you + * can't reset your device in the second kernel. + */ +int crash_shutdown_register(crash_shutdown_t handler) +{ + unsigned int i, rc; + + spin_lock(&crash_handlers_lock); + for (i = 0 ; i < CRASH_HANDLER_MAX; i++) + if (!crash_shutdown_handles[i]) { + /* Insert handle at first empty entry */ + crash_shutdown_handles[i] = handler; + rc = 0; + break; + } + + if (i == CRASH_HANDLER_MAX) { + printk(KERN_ERR "Crash shutdown handles full, " + "not registered.\n"); + rc = 1; + } + + spin_unlock(&crash_handlers_lock); + return rc; +} +EXPORT_SYMBOL(crash_shutdown_register); + +int crash_shutdown_unregister(crash_shutdown_t handler) +{ + unsigned int i, rc; + + spin_lock(&crash_handlers_lock); + for (i = 0 ; i < CRASH_HANDLER_MAX; i++) + if (crash_shutdown_handles[i] == handler) + break; + + if (i == CRASH_HANDLER_MAX) { + printk(KERN_ERR "Crash shutdown handle not found\n"); + rc = 1; + } else { + /* Shift handles down */ + for (; i < (CRASH_HANDLER_MAX - 1); i++) + crash_shutdown_handles[i] = + crash_shutdown_handles[i+1]; + /* + * Reset last entry to NULL now that it has been shifted down, + * this will allow new handles to be added here. + */ + crash_shutdown_handles[i] = NULL; + rc = 0; + } + + spin_unlock(&crash_handlers_lock); + return rc; +} +EXPORT_SYMBOL(crash_shutdown_unregister); + +void default_machine_crash_shutdown(struct pt_regs *regs) +{ + unsigned int i; + int (*old_handler)(struct pt_regs *regs); + + if (TRAP(regs) == INTERRUPT_SYSTEM_RESET) + is_via_system_reset = 1; + + crash_smp_send_stop(); + + crash_save_cpu(regs, crashing_cpu); + + time_to_dump = 1; + + crash_kexec_wait_realmode(crashing_cpu); + + machine_kexec_mask_interrupts(); + + /* + * Call registered shutdown routines safely. Swap out + * __debugger_fault_handler, and replace on exit. + */ + old_handler = __debugger_fault_handler; + __debugger_fault_handler = handle_fault; + crash_shutdown_cpu = smp_processor_id(); + for (i = 0; i < CRASH_HANDLER_MAX && crash_shutdown_handles[i]; i++) { + if (setjmp(crash_shutdown_buf) == 0) { + /* + * Insert syncs and delay to ensure + * instructions in the dangerous region don't + * leak away from this protected region. + */ + asm volatile("sync; isync"); + /* dangerous region */ + crash_shutdown_handles[i](); + asm volatile("sync; isync"); + } + } + crash_shutdown_cpu = -1; + __debugger_fault_handler = old_handler; + + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(1, 0); +} -- cgit v1.2.3