From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/mm/cacheflush.c | 234 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 234 insertions(+) create mode 100644 arch/powerpc/mm/cacheflush.c (limited to 'arch/powerpc/mm/cacheflush.c') diff --git a/arch/powerpc/mm/cacheflush.c b/arch/powerpc/mm/cacheflush.c new file mode 100644 index 000000000..0e9b4879c --- /dev/null +++ b/arch/powerpc/mm/cacheflush.c @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include +#include + +/** + * flush_coherent_icache() - if a CPU has a coherent icache, flush it + * Return true if the cache was flushed, false otherwise + */ +static inline bool flush_coherent_icache(void) +{ + /* + * For a snooping icache, we still need a dummy icbi to purge all the + * prefetched instructions from the ifetch buffers. We also need a sync + * before the icbi to order the actual stores to memory that might + * have modified instructions with the icbi. + */ + if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) { + mb(); /* sync */ + icbi((void *)PAGE_OFFSET); + mb(); /* sync */ + isync(); + return true; + } + + return false; +} + +/** + * invalidate_icache_range() - Flush the icache by issuing icbi across an address range + * @start: the start address + * @stop: the stop address (exclusive) + */ +static void invalidate_icache_range(unsigned long start, unsigned long stop) +{ + unsigned long shift = l1_icache_shift(); + unsigned long bytes = l1_icache_bytes(); + char *addr = (char *)(start & ~(bytes - 1)); + unsigned long size = stop - (unsigned long)addr + (bytes - 1); + unsigned long i; + + for (i = 0; i < size >> shift; i++, addr += bytes) + icbi(addr); + + mb(); /* sync */ + isync(); +} + +/** + * flush_icache_range: Write any modified data cache blocks out to memory + * and invalidate the corresponding blocks in the instruction cache + * + * Generic code will call this after writing memory, before executing from it. + * + * @start: the start address + * @stop: the stop address (exclusive) + */ +void flush_icache_range(unsigned long start, unsigned long stop) +{ + if (flush_coherent_icache()) + return; + + clean_dcache_range(start, stop); + + if (IS_ENABLED(CONFIG_44x)) { + /* + * Flash invalidate on 44x because we are passed kmapped + * addresses and this doesn't work for userspace pages due to + * the virtually tagged icache. + */ + iccci((void *)start); + mb(); /* sync */ + isync(); + } else + invalidate_icache_range(start, stop); +} +EXPORT_SYMBOL(flush_icache_range); + +#ifdef CONFIG_HIGHMEM +/** + * flush_dcache_icache_phys() - Flush a page by it's physical address + * @physaddr: the physical address of the page + */ +static void flush_dcache_icache_phys(unsigned long physaddr) +{ + unsigned long bytes = l1_dcache_bytes(); + unsigned long nb = PAGE_SIZE / bytes; + unsigned long addr = physaddr & PAGE_MASK; + unsigned long msr, msr0; + unsigned long loop1 = addr, loop2 = addr; + + msr0 = mfmsr(); + msr = msr0 & ~MSR_DR; + /* + * This must remain as ASM to prevent potential memory accesses + * while the data MMU is disabled + */ + asm volatile( + " mtctr %2;\n" + " mtmsr %3;\n" + " isync;\n" + "0: dcbst 0, %0;\n" + " addi %0, %0, %4;\n" + " bdnz 0b;\n" + " sync;\n" + " mtctr %2;\n" + "1: icbi 0, %1;\n" + " addi %1, %1, %4;\n" + " bdnz 1b;\n" + " sync;\n" + " mtmsr %5;\n" + " isync;\n" + : "+&r" (loop1), "+&r" (loop2) + : "r" (nb), "r" (msr), "i" (bytes), "r" (msr0) + : "ctr", "memory"); +} +NOKPROBE_SYMBOL(flush_dcache_icache_phys) +#else +static void flush_dcache_icache_phys(unsigned long physaddr) +{ +} +#endif + +/** + * __flush_dcache_icache(): Flush a particular page from the data cache to RAM. + * Note: this is necessary because the instruction cache does *not* + * snoop from the data cache. + * + * @p: the address of the page to flush + */ +static void __flush_dcache_icache(void *p) +{ + unsigned long addr = (unsigned long)p & PAGE_MASK; + + clean_dcache_range(addr, addr + PAGE_SIZE); + + /* + * We don't flush the icache on 44x. Those have a virtual icache and we + * don't have access to the virtual address here (it's not the page + * vaddr but where it's mapped in user space). The flushing of the + * icache on these is handled elsewhere, when a change in the address + * space occurs, before returning to user space. + */ + + if (mmu_has_feature(MMU_FTR_TYPE_44x)) + return; + + invalidate_icache_range(addr, addr + PAGE_SIZE); +} + +static void flush_dcache_icache_hugepage(struct page *page) +{ + int i; + int nr = compound_nr(page); + + if (!PageHighMem(page)) { + for (i = 0; i < nr; i++) + __flush_dcache_icache(lowmem_page_address(page + i)); + } else { + for (i = 0; i < nr; i++) { + void *start = kmap_local_page(page + i); + + __flush_dcache_icache(start); + kunmap_local(start); + } + } +} + +void flush_dcache_icache_page(struct page *page) +{ + if (flush_coherent_icache()) + return; + + if (PageCompound(page)) + return flush_dcache_icache_hugepage(page); + + if (!PageHighMem(page)) { + __flush_dcache_icache(lowmem_page_address(page)); + } else if (IS_ENABLED(CONFIG_BOOKE) || sizeof(phys_addr_t) > sizeof(void *)) { + void *start = kmap_local_page(page); + + __flush_dcache_icache(start); + kunmap_local(start); + } else { + flush_dcache_icache_phys(page_to_phys(page)); + } +} +EXPORT_SYMBOL(flush_dcache_icache_page); + +void clear_user_page(void *page, unsigned long vaddr, struct page *pg) +{ + clear_page(page); + + /* + * We shouldn't have to do this, but some versions of glibc + * require it (ld.so assumes zero filled pages are icache clean) + * - Anton + */ + flush_dcache_page(pg); +} +EXPORT_SYMBOL(clear_user_page); + +void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, + struct page *pg) +{ + copy_page(vto, vfrom); + + /* + * We should be able to use the following optimisation, however + * there are two problems. + * Firstly a bug in some versions of binutils meant PLT sections + * were not marked executable. + * Secondly the first word in the GOT section is blrl, used + * to establish the GOT address. Until recently the GOT was + * not marked executable. + * - Anton + */ +#if 0 + if (!vma->vm_file && ((vma->vm_flags & VM_EXEC) == 0)) + return; +#endif + + flush_dcache_page(pg); +} + +void flush_icache_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len) +{ + void *maddr; + + maddr = kmap_local_page(page) + (addr & ~PAGE_MASK); + flush_icache_range((unsigned long)maddr, (unsigned long)maddr + len); + kunmap_local(maddr); +} -- cgit v1.2.3