From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/mm/copro_fault.c | 155 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 155 insertions(+) create mode 100644 arch/powerpc/mm/copro_fault.c (limited to 'arch/powerpc/mm/copro_fault.c') diff --git a/arch/powerpc/mm/copro_fault.c b/arch/powerpc/mm/copro_fault.c new file mode 100644 index 000000000..7c507fb48 --- /dev/null +++ b/arch/powerpc/mm/copro_fault.c @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * CoProcessor (SPU/AFU) mm fault handler + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2007 + * + * Author: Arnd Bergmann + * Author: Jeremy Kerr + */ +#include +#include +#include +#include +#include +#include +#include + +/* + * This ought to be kept in sync with the powerpc specific do_page_fault + * function. Currently, there are a few corner cases that we haven't had + * to handle fortunately. + */ +int copro_handle_mm_fault(struct mm_struct *mm, unsigned long ea, + unsigned long dsisr, vm_fault_t *flt) +{ + struct vm_area_struct *vma; + unsigned long is_write; + int ret; + + if (mm == NULL) + return -EFAULT; + + if (mm->pgd == NULL) + return -EFAULT; + + mmap_read_lock(mm); + ret = -EFAULT; + vma = find_vma(mm, ea); + if (!vma) + goto out_unlock; + + if (ea < vma->vm_start) { + if (!(vma->vm_flags & VM_GROWSDOWN)) + goto out_unlock; + if (expand_stack(vma, ea)) + goto out_unlock; + } + + is_write = dsisr & DSISR_ISSTORE; + if (is_write) { + if (!(vma->vm_flags & VM_WRITE)) + goto out_unlock; + } else { + if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + goto out_unlock; + /* + * PROT_NONE is covered by the VMA check above. + * and hash should get a NOHPTE fault instead of + * a PROTFAULT in case fixup is needed for things + * like autonuma. + */ + if (!radix_enabled()) + WARN_ON_ONCE(dsisr & DSISR_PROTFAULT); + } + + ret = 0; + *flt = handle_mm_fault(vma, ea, is_write ? FAULT_FLAG_WRITE : 0, NULL); + + /* The fault is fully completed (including releasing mmap lock) */ + if (*flt & VM_FAULT_COMPLETED) + return 0; + + if (unlikely(*flt & VM_FAULT_ERROR)) { + if (*flt & VM_FAULT_OOM) { + ret = -ENOMEM; + goto out_unlock; + } else if (*flt & (VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV)) { + ret = -EFAULT; + goto out_unlock; + } + BUG(); + } + +out_unlock: + mmap_read_unlock(mm); + return ret; +} +EXPORT_SYMBOL_GPL(copro_handle_mm_fault); + +#ifdef CONFIG_PPC_64S_HASH_MMU +int copro_calculate_slb(struct mm_struct *mm, u64 ea, struct copro_slb *slb) +{ + u64 vsid, vsidkey; + int psize, ssize; + + switch (get_region_id(ea)) { + case USER_REGION_ID: + pr_devel("%s: 0x%llx -- USER_REGION_ID\n", __func__, ea); + if (mm == NULL) + return 1; + psize = get_slice_psize(mm, ea); + ssize = user_segment_size(ea); + vsid = get_user_vsid(&mm->context, ea, ssize); + vsidkey = SLB_VSID_USER; + break; + case VMALLOC_REGION_ID: + pr_devel("%s: 0x%llx -- VMALLOC_REGION_ID\n", __func__, ea); + psize = mmu_vmalloc_psize; + ssize = mmu_kernel_ssize; + vsid = get_kernel_vsid(ea, mmu_kernel_ssize); + vsidkey = SLB_VSID_KERNEL; + break; + case IO_REGION_ID: + pr_devel("%s: 0x%llx -- IO_REGION_ID\n", __func__, ea); + psize = mmu_io_psize; + ssize = mmu_kernel_ssize; + vsid = get_kernel_vsid(ea, mmu_kernel_ssize); + vsidkey = SLB_VSID_KERNEL; + break; + case LINEAR_MAP_REGION_ID: + pr_devel("%s: 0x%llx -- LINEAR_MAP_REGION_ID\n", __func__, ea); + psize = mmu_linear_psize; + ssize = mmu_kernel_ssize; + vsid = get_kernel_vsid(ea, mmu_kernel_ssize); + vsidkey = SLB_VSID_KERNEL; + break; + default: + pr_debug("%s: invalid region access at %016llx\n", __func__, ea); + return 1; + } + /* Bad address */ + if (!vsid) + return 1; + + vsid = (vsid << slb_vsid_shift(ssize)) | vsidkey; + + vsid |= mmu_psize_defs[psize].sllp | + ((ssize == MMU_SEGSIZE_1T) ? SLB_VSID_B_1T : 0); + + slb->esid = (ea & (ssize == MMU_SEGSIZE_1T ? ESID_MASK_1T : ESID_MASK)) | SLB_ESID_V; + slb->vsid = vsid; + + return 0; +} +EXPORT_SYMBOL_GPL(copro_calculate_slb); + +void copro_flush_all_slbs(struct mm_struct *mm) +{ +#ifdef CONFIG_SPU_BASE + spu_flush_all_slbs(mm); +#endif + cxl_slbia(mm); +} +EXPORT_SYMBOL_GPL(copro_flush_all_slbs); +#endif -- cgit v1.2.3