From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/perf/hv-24x7.h | 160 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) create mode 100644 arch/powerpc/perf/hv-24x7.h (limited to 'arch/powerpc/perf/hv-24x7.h') diff --git a/arch/powerpc/perf/hv-24x7.h b/arch/powerpc/perf/hv-24x7.h new file mode 100644 index 000000000..ae4ae4813 --- /dev/null +++ b/arch/powerpc/perf/hv-24x7.h @@ -0,0 +1,160 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef LINUX_POWERPC_PERF_HV_24X7_H_ +#define LINUX_POWERPC_PERF_HV_24X7_H_ + +#include + +enum hv_perf_domains { +#define DOMAIN(n, v, x, c) HV_PERF_DOMAIN_##n = v, +#include "hv-24x7-domains.h" +#undef DOMAIN + HV_PERF_DOMAIN_MAX, +}; + +#define H24x7_REQUEST_SIZE(iface_version) (iface_version == 1 ? 16 : 32) + +struct hv_24x7_request { + /* PHYSICAL domains require enabling via phyp/hmc. */ + __u8 performance_domain; + __u8 reserved[0x1]; + + /* bytes to read starting at @data_offset. must be a multiple of 8 */ + __be16 data_size; + + /* + * byte offset within the perf domain to read from. must be 8 byte + * aligned + */ + __be32 data_offset; + + /* + * only valid for VIRTUAL_PROCESSOR domains, ignored for others. + * -1 means "current partition only" + * Enabling via phyp/hmc required for non-"-1" values. 0 forbidden + * unless requestor is 0. + */ + __be16 starting_lpar_ix; + + /* + * Ignored when @starting_lpar_ix == -1 + * Ignored when @performance_domain is not VIRTUAL_PROCESSOR_* + * -1 means "infinite" or all + */ + __be16 max_num_lpars; + + /* chip, core, or virtual processor based on @performance_domain */ + __be16 starting_ix; + __be16 max_ix; + + /* The following fields were added in v2 of the 24x7 interface. */ + + __u8 starting_thread_group_ix; + + /* -1 means all thread groups starting at @starting_thread_group_ix */ + __u8 max_num_thread_groups; + + __u8 reserved2[0xE]; +} __packed; + +struct hv_24x7_request_buffer { + /* 0 - ? */ + /* 1 - ? */ + __u8 interface_version; + __u8 num_requests; + __u8 reserved[0xE]; + struct hv_24x7_request requests[]; +} __packed; + +struct hv_24x7_result_element_v1 { + __be16 lpar_ix; + + /* + * represents the core, chip, or virtual processor based on the + * request's @performance_domain + */ + __be16 domain_ix; + + /* -1 if @performance_domain does not refer to a virtual processor */ + __be32 lpar_cfg_instance_id; + + /* size = @result_element_data_size of containing result. */ + __u64 element_data[]; +} __packed; + +/* + * We need a separate struct for v2 because the offset of @element_data changed + * between versions. + */ +struct hv_24x7_result_element_v2 { + __be16 lpar_ix; + + /* + * represents the core, chip, or virtual processor based on the + * request's @performance_domain + */ + __be16 domain_ix; + + /* -1 if @performance_domain does not refer to a virtual processor */ + __be32 lpar_cfg_instance_id; + + __u8 thread_group_ix; + + __u8 reserved[7]; + + /* size = @result_element_data_size of containing result. */ + __u64 element_data[]; +} __packed; + +struct hv_24x7_result { + /* + * The index of the 24x7 Request Structure in the 24x7 Request Buffer + * used to request this result. + */ + __u8 result_ix; + + /* + * 0 = not all result elements fit into the buffer, additional requests + * required + * 1 = all result elements were returned + */ + __u8 results_complete; + __be16 num_elements_returned; + + /* + * This is a copy of @data_size from the corresponding hv_24x7_request + * + * Warning: to obtain the size of each element in @elements you have + * to add the size of the other members of the result_element struct. + */ + __be16 result_element_data_size; + __u8 reserved[0x2]; + + /* + * Either + * struct hv_24x7_result_element_v1[@num_elements_returned] + * or + * struct hv_24x7_result_element_v2[@num_elements_returned] + * + * depending on the interface_version field of the + * struct hv_24x7_data_result_buffer containing this result. + */ + char elements[]; +} __packed; + +struct hv_24x7_data_result_buffer { + /* See versioning for request buffer */ + __u8 interface_version; + + __u8 num_results; + __u8 reserved[0x1]; + __u8 failing_request_ix; + __be32 detailed_rc; + __be64 cec_cfg_instance_id; + __be64 catalog_version_num; + __u8 reserved2[0x8]; + /* WARNING: only valid for the first result due to variable sizes of + * results */ + struct hv_24x7_result results[]; /* [@num_results] */ +} __packed; + +#endif -- cgit v1.2.3