From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/44x/Kconfig | 317 +++++++++++++++++++++++++++++++++++++ 1 file changed, 317 insertions(+) create mode 100644 arch/powerpc/platforms/44x/Kconfig (limited to 'arch/powerpc/platforms/44x/Kconfig') diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig new file mode 100644 index 000000000..25b80cd55 --- /dev/null +++ b/arch/powerpc/platforms/44x/Kconfig @@ -0,0 +1,317 @@ +# SPDX-License-Identifier: GPL-2.0 +config PPC_47x + bool "Support for 47x variant" + depends on 44x + select MPIC + help + This option enables support for the 47x family of processors and is + not currently compatible with other 44x or 46x variants + +config BAMBOO + bool "Bamboo" + depends on 44x + select PPC44x_SIMPLE + select 440EP + select FORCE_PCI + help + This option enables support for the IBM PPC440EP evaluation board. + +config BLUESTONE + bool "Bluestone" + depends on 44x + select PPC44x_SIMPLE + select APM821xx + select FORCE_PCI + select PCI_MSI + select PPC4xx_PCI_EXPRESS + select IBM_EMAC_RGMII if IBM_EMAC + help + This option enables support for the APM APM821xx Evaluation board. + +config EBONY + bool "Ebony" + depends on 44x + default y + select 440GP + select FORCE_PCI + select OF_RTC + help + This option enables support for the IBM PPC440GP evaluation board. + +config SAM440EP + bool "Sam440ep" + depends on 44x + select 440EP + select FORCE_PCI + help + This option enables support for the ACube Sam440ep board. + +config SEQUOIA + bool "Sequoia" + depends on 44x + select PPC44x_SIMPLE + select 440EPX + help + This option enables support for the AMCC PPC440EPX evaluation board. + +config TAISHAN + bool "Taishan" + depends on 44x + select PPC44x_SIMPLE + select 440GX + select FORCE_PCI + help + This option enables support for the AMCC PPC440GX "Taishan" + evaluation board. + +config KATMAI + bool "Katmai" + depends on 44x + select PPC44x_SIMPLE + select 440SPe + select FORCE_PCI + select PPC4xx_PCI_EXPRESS + select PCI_MSI + help + This option enables support for the AMCC PPC440SPe evaluation board. + +config RAINIER + bool "Rainier" + depends on 44x + select PPC44x_SIMPLE + select 440GRX + select FORCE_PCI + help + This option enables support for the AMCC PPC440GRX evaluation board. + +config WARP + bool "PIKA Warp" + depends on 44x + select 440EP + help + This option enables support for the PIKA Warp(tm) Appliance. The Warp + is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP + stations and trunks. + + See http://www.pikatechnologies.com/ and follow the "PIKA for Computer + Telephony Developers" link for more information. + +config ARCHES + bool "Arches" + depends on 44x + select PPC44x_SIMPLE + select 460EX # Odd since it uses 460GT but the effects are the same + select FORCE_PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC Dual PPC460GT evaluation board. + +config CANYONLANDS + bool "Canyonlands" + depends on 44x + select 460EX + select FORCE_PCI + select PPC4xx_PCI_EXPRESS + select PCI_MSI + select IBM_EMAC_RGMII if IBM_EMAC + select IBM_EMAC_ZMII if IBM_EMAC + help + This option enables support for the AMCC PPC460EX evaluation board. + +config GLACIER + bool "Glacier" + depends on 44x + select PPC44x_SIMPLE + select 460EX # Odd since it uses 460GT but the effects are the same + select FORCE_PCI + select PPC4xx_PCI_EXPRESS + select IBM_EMAC_RGMII if IBM_EMAC + select IBM_EMAC_ZMII if IBM_EMAC + help + This option enables support for the AMCC PPC460GT evaluation board. + +config REDWOOD + bool "Redwood" + depends on 44x + select PPC44x_SIMPLE + select 460SX + select FORCE_PCI + select PPC4xx_PCI_EXPRESS + select PCI_MSI + help + This option enables support for the AMCC PPC460SX Redwood board. + +config EIGER + bool "Eiger" + depends on 44x + select PPC44x_SIMPLE + select 460SX + select FORCE_PCI + select PPC4xx_PCI_EXPRESS + select IBM_EMAC_RGMII if IBM_EMAC + help + This option enables support for the AMCC PPC460SX evaluation board. + +config YOSEMITE + bool "Yosemite" + depends on 44x + select PPC44x_SIMPLE + select 440EP + select FORCE_PCI + help + This option enables support for the AMCC PPC440EP evaluation board. + +config ISS4xx + bool "ISS 4xx Simulator" + depends on 44x + select 440GP if 44x && !PPC_47x + select PPC_FPU + select OF_RTC + help + This option enables support for the IBM ISS simulation environment + +config CURRITUCK + bool "IBM Currituck (476fpe) Support" + depends on PPC_47x + select SWIOTLB + select 476FPE + select FORCE_PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the IBM Currituck (476fpe) evaluation board + +config FSP2 + bool "IBM FSP2 (476fpe) Support" + depends on PPC_47x + select 476FPE + select IBM_EMAC_EMAC4 if IBM_EMAC + select IBM_EMAC_RGMII if IBM_EMAC + select COMMON_CLK + select DEFAULT_UIMAGE + help + This option enables support for the IBM FSP2 (476fpe) board + +config AKEBONO + bool "IBM Akebono (476gtr) Support" + depends on PPC_47x + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + select FORCE_PCI + select PCI_MSI + select PPC4xx_HSTA_MSI + select I2C + select I2C_IBM_IIC + select IBM_EMAC_EMAC4 if IBM_EMAC + select USB if USB_SUPPORT + select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD + select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD + help + This option enables support for the IBM Akebono (476gtr) evaluation board + + +config ICON + bool "Icon" + depends on 44x + select PPC44x_SIMPLE + select 440SPe + select FORCE_PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC440SPe evaluation board. + +config PPC44x_SIMPLE + bool "Simple PowerPC 44x board support" + depends on 44x + help + This option enables the simple PowerPC 44x platform support. + +config PPC4xx_GPIO + bool "PPC4xx GPIO support" + depends on 44x + select GPIOLIB + help + Enable gpiolib support for ppc440 based boards + +# 44x specific CPU modules, selected based on the board above. +config 440EP + bool + select PPC_FPU + select IBM440EP_ERR42 + select IBM_EMAC_ZMII if IBM_EMAC + +config 440EPX + bool + select PPC_FPU + select IBM_EMAC_EMAC4 if IBM_EMAC + select IBM_EMAC_RGMII if IBM_EMAC + select IBM_EMAC_ZMII if IBM_EMAC + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC + +config 440GRX + bool + select IBM_EMAC_EMAC4 if IBM_EMAC + select IBM_EMAC_RGMII if IBM_EMAC + select IBM_EMAC_ZMII if IBM_EMAC + +config 440GP + bool + select IBM_EMAC_ZMII if IBM_EMAC + +config 440GX + bool + select IBM_EMAC_EMAC4 if IBM_EMAC + select IBM_EMAC_RGMII if IBM_EMAC + select IBM_EMAC_ZMII if IBM_EMAC #test only + select IBM_EMAC_TAH if IBM_EMAC #test only + +config 440SP + bool + +config 440SPe + bool + select IBM_EMAC_EMAC4 if IBM_EMAC + +config 460EX + bool + select PPC_FPU + select IBM_EMAC_EMAC4 if IBM_EMAC + select IBM_EMAC_TAH if IBM_EMAC + +config 460SX + bool + select PPC_FPU + select IBM_EMAC_EMAC4 if IBM_EMAC + select IBM_EMAC_RGMII if IBM_EMAC + select IBM_EMAC_ZMII if IBM_EMAC + select IBM_EMAC_TAH if IBM_EMAC + +config 476FPE + bool + select PPC_FPU + +config APM821xx + bool + select PPC_FPU + select IBM_EMAC_EMAC4 if IBM_EMAC + select IBM_EMAC_TAH if IBM_EMAC + +config 476FPE_ERR46 + depends on 476FPE + bool "Enable linker work around for PPC476FPE errata #46" + help + This option enables a work around for an icache bug on 476 + that can cause execution of stale instructions when falling + through pages (IBM errata #46). It requires a recent version + of binutils which supports the --ppc476-workaround option. + + The work around enables the appropriate linker options and + ensures that all module output sections are aligned to 4K + page boundaries. The work around is only required when + building modules. + +# 44x errata/workaround config symbols, selected by the CPU models above +config IBM440EP_ERR42 + bool + -- cgit v1.2.3