From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/44x/fsp2.c | 317 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 317 insertions(+) create mode 100644 arch/powerpc/platforms/44x/fsp2.c (limited to 'arch/powerpc/platforms/44x/fsp2.c') diff --git a/arch/powerpc/platforms/44x/fsp2.c b/arch/powerpc/platforms/44x/fsp2.c new file mode 100644 index 000000000..e2e4f6d81 --- /dev/null +++ b/arch/powerpc/platforms/44x/fsp2.c @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * FSP-2 board specific routines + * + * Based on earlier code: + * Matt Porter + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin or + * Copyright (c) 2003-2005 Zultys Technologies + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 David Gibson , IBM Corporation. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include "fsp2.h" + +#define FSP2_BUS_ERR "ibm,bus-error-irq" +#define FSP2_CMU_ERR "ibm,cmu-error-irq" +#define FSP2_CONF_ERR "ibm,conf-error-irq" +#define FSP2_OPBD_ERR "ibm,opbd-error-irq" +#define FSP2_MCUE "ibm,mc-ue-irq" +#define FSP2_RST_WRN "ibm,reset-warning-irq" + +static __initdata struct of_device_id fsp2_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,plb6", }, + { .compatible = "ibm,opb", }, + {}, +}; + +static void l2regs(void) +{ + pr_err("L2 Controller:\n"); + pr_err("MCK: 0x%08x\n", mfl2(L2MCK)); + pr_err("INT: 0x%08x\n", mfl2(L2INT)); + pr_err("PLBSTAT0: 0x%08x\n", mfl2(L2PLBSTAT0)); + pr_err("PLBSTAT1: 0x%08x\n", mfl2(L2PLBSTAT1)); + pr_err("ARRSTAT0: 0x%08x\n", mfl2(L2ARRSTAT0)); + pr_err("ARRSTAT1: 0x%08x\n", mfl2(L2ARRSTAT1)); + pr_err("ARRSTAT2: 0x%08x\n", mfl2(L2ARRSTAT2)); + pr_err("CPUSTAT: 0x%08x\n", mfl2(L2CPUSTAT)); + pr_err("RACSTAT0: 0x%08x\n", mfl2(L2RACSTAT0)); + pr_err("WACSTAT0: 0x%08x\n", mfl2(L2WACSTAT0)); + pr_err("WACSTAT1: 0x%08x\n", mfl2(L2WACSTAT1)); + pr_err("WACSTAT2: 0x%08x\n", mfl2(L2WACSTAT2)); + pr_err("WDFSTAT: 0x%08x\n", mfl2(L2WDFSTAT)); + pr_err("LOG0: 0x%08x\n", mfl2(L2LOG0)); + pr_err("LOG1: 0x%08x\n", mfl2(L2LOG1)); + pr_err("LOG2: 0x%08x\n", mfl2(L2LOG2)); + pr_err("LOG3: 0x%08x\n", mfl2(L2LOG3)); + pr_err("LOG4: 0x%08x\n", mfl2(L2LOG4)); + pr_err("LOG5: 0x%08x\n", mfl2(L2LOG5)); +} + +static void show_plbopb_regs(u32 base, int num) +{ + pr_err("\nPLBOPB Bridge %d:\n", num); + pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0)); + pr_err("GESR1: 0x%08x\n", mfdcr(base + PLB4OPB_GESR1)); + pr_err("GESR2: 0x%08x\n", mfdcr(base + PLB4OPB_GESR2)); + pr_err("GEARU: 0x%08x\n", mfdcr(base + PLB4OPB_GEARU)); + pr_err("GEAR: 0x%08x\n", mfdcr(base + PLB4OPB_GEAR)); +} + +static irqreturn_t bus_err_handler(int irq, void *data) +{ + pr_err("Bus Error\n"); + + l2regs(); + + pr_err("\nPLB6 Controller:\n"); + pr_err("BC_SHD: 0x%08x\n", mfdcr(DCRN_PLB6_SHD)); + pr_err("BC_ERR: 0x%08x\n", mfdcr(DCRN_PLB6_ERR)); + + pr_err("\nPLB6-to-PLB4 Bridge:\n"); + pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_ESR)); + pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARH)); + pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARL)); + + pr_err("\nPLB4-to-PLB6 Bridge:\n"); + pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_ESR)); + pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARH)); + pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARL)); + + pr_err("\nPLB6-to-MCIF Bridge:\n"); + pr_err("BESR0: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR0)); + pr_err("BESR1: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR1)); + pr_err("BEARH: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARH)); + pr_err("BEARL: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARL)); + + pr_err("\nPLB4 Arbiter:\n"); + pr_err("P0ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRH)); + pr_err("P0ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRL)); + pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH)); + pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH)); + pr_err("P1ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRH)); + pr_err("P1ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRL)); + pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH)); + pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH)); + + show_plbopb_regs(DCRN_PLB4OPB0_BASE, 0); + show_plbopb_regs(DCRN_PLB4OPB1_BASE, 1); + show_plbopb_regs(DCRN_PLB4OPB2_BASE, 2); + show_plbopb_regs(DCRN_PLB4OPB3_BASE, 3); + + pr_err("\nPLB4-to-AHB Bridge:\n"); + pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_ESR)); + pr_err("SEUAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SEUAR)); + pr_err("SELAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SELAR)); + + pr_err("\nAHB-to-PLB4 Bridge:\n"); + pr_err("\nESR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_ESR)); + pr_err("\nEAR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_EAR)); + panic("Bus Error\n"); +} + +static irqreturn_t cmu_err_handler(int irq, void *data) { + pr_err("CMU Error\n"); + pr_err("FIR0: 0x%08x\n", mfcmu(CMUN_FIR0)); + panic("CMU Error\n"); +} + +static irqreturn_t conf_err_handler(int irq, void *data) { + pr_err("Configuration Logic Error\n"); + pr_err("CONF_FIR: 0x%08x\n", mfdcr(DCRN_CONF_FIR_RWC)); + pr_err("RPERR0: 0x%08x\n", mfdcr(DCRN_CONF_RPERR0)); + pr_err("RPERR1: 0x%08x\n", mfdcr(DCRN_CONF_RPERR1)); + panic("Configuration Logic Error\n"); +} + +static irqreturn_t opbd_err_handler(int irq, void *data) { + panic("OPBD Error\n"); +} + +static irqreturn_t mcue_handler(int irq, void *data) { + pr_err("DDR: Uncorrectable Error\n"); + pr_err("MCSTAT: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCSTAT)); + pr_err("MCOPT1: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCOPT1)); + pr_err("MCOPT2: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCOPT2)); + pr_err("PHYSTAT: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_PHYSTAT)); + pr_err("CFGR0: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR0)); + pr_err("CFGR1: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR1)); + pr_err("CFGR2: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR2)); + pr_err("CFGR3: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR3)); + pr_err("SCRUB_CNTL: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_SCRUB_CNTL)); + pr_err("ECCERR_PORT0: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_PORT0)); + pr_err("ECCERR_ADDR_PORT0: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_ADDR_PORT0)); + pr_err("ECCERR_CNT_PORT0: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_COUNT_PORT0)); + pr_err("ECC_CHECK_PORT0: 0x%08x\n", + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECC_CHECK_PORT0)); + pr_err("MCER0: 0x%08x\n", + mfdcr(DCRN_CW_BASE + DCRN_CW_MCER0)); + pr_err("MCER1: 0x%08x\n", + mfdcr(DCRN_CW_BASE + DCRN_CW_MCER1)); + pr_err("BESR: 0x%08x\n", + mfdcr(DCRN_PLB6MCIF_BESR0)); + pr_err("BEARL: 0x%08x\n", + mfdcr(DCRN_PLB6MCIF_BEARL)); + pr_err("BEARH: 0x%08x\n", + mfdcr(DCRN_PLB6MCIF_BEARH)); + panic("DDR: Uncorrectable Error\n"); +} + +static irqreturn_t rst_wrn_handler(int irq, void *data) { + u32 crcs = mfcmu(CMUN_CRCS); + switch (crcs & CRCS_STAT_MASK) { + case CRCS_STAT_CHIP_RST_B: + panic("Received chassis-initiated reset request"); + default: + panic("Unknown external reset: CRCS=0x%x", crcs); + } +} + +static void __init node_irq_request(const char *compat, irq_handler_t errirq_handler) +{ + struct device_node *np; + unsigned int irq; + int32_t rc; + + for_each_compatible_node(np, NULL, compat) { + irq = irq_of_parse_and_map(np, 0); + if (irq == NO_IRQ) { + pr_err("device tree node %pOFn is missing a interrupt", + np); + of_node_put(np); + return; + } + + rc = request_irq(irq, errirq_handler, 0, np->name, np); + if (rc) { + pr_err("fsp_of_probe: request_irq failed: np=%pOF rc=%d", + np, rc); + of_node_put(np); + return; + } + } +} + +static void __init critical_irq_setup(void) +{ + node_irq_request(FSP2_CMU_ERR, cmu_err_handler); + node_irq_request(FSP2_BUS_ERR, bus_err_handler); + node_irq_request(FSP2_CONF_ERR, conf_err_handler); + node_irq_request(FSP2_OPBD_ERR, opbd_err_handler); + node_irq_request(FSP2_MCUE, mcue_handler); + node_irq_request(FSP2_RST_WRN, rst_wrn_handler); +} + +static int __init fsp2_device_probe(void) +{ + of_platform_bus_probe(NULL, fsp2_of_bus, NULL); + return 0; +} +machine_device_initcall(fsp2, fsp2_device_probe); + +static int __init fsp2_probe(void) +{ + u32 val; + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "ibm,fsp2")) + return 0; + + /* Clear BC_ERR and mask snoopable request plb errors. */ + val = mfdcr(DCRN_PLB6_CR0); + val |= 0x20000000; + mtdcr(DCRN_PLB6_BASE, val); + mtdcr(DCRN_PLB6_HD, 0xffff0000); + mtdcr(DCRN_PLB6_SHD, 0xffff0000); + + /* TVSENSE reset is blocked (clock gated) by the POR default of the TVS + * sleep config bit. As a consequence, TVSENSE will provide erratic + * sensor values, which may result in spurious (parity) errors + * recorded in the CMU FIR and leading to erroneous interrupt requests + * once the CMU interrupt is unmasked. + */ + + /* 1. set TVS1[UNDOZE] */ + val = mfcmu(CMUN_TVS1); + val |= 0x4; + mtcmu(CMUN_TVS1, val); + + /* 2. clear FIR[TVS] and FIR[TVSPAR] */ + val = mfcmu(CMUN_FIR0); + val |= 0x30000000; + mtcmu(CMUN_FIR0, val); + + /* L2 machine checks */ + mtl2(L2PLBMCKEN0, 0xffffffff); + mtl2(L2PLBMCKEN1, 0x0000ffff); + mtl2(L2ARRMCKEN0, 0xffffffff); + mtl2(L2ARRMCKEN1, 0xffffffff); + mtl2(L2ARRMCKEN2, 0xfffff000); + mtl2(L2CPUMCKEN, 0xffffffff); + mtl2(L2RACMCKEN0, 0xffffffff); + mtl2(L2WACMCKEN0, 0xffffffff); + mtl2(L2WACMCKEN1, 0xffffffff); + mtl2(L2WACMCKEN2, 0xffffffff); + mtl2(L2WDFMCKEN, 0xffffffff); + + /* L2 interrupts */ + mtl2(L2PLBINTEN1, 0xffff0000); + + /* + * At a global level, enable all L2 machine checks and interrupts + * reported by the L2 subsystems, except for the external machine check + * input (UIC0.1). + */ + mtl2(L2MCKEN, 0x000007ff); + mtl2(L2INTEN, 0x000004ff); + + /* Enable FSP-2 configuration logic parity errors */ + mtdcr(DCRN_CONF_EIR_RS, 0x80000000); + return 1; +} + +static void __init fsp2_irq_init(void) +{ + uic_init_tree(); + critical_irq_setup(); +} + +define_machine(fsp2) { + .name = "FSP-2", + .probe = fsp2_probe, + .progress = udbg_progress, + .init_IRQ = fsp2_irq_init, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; -- cgit v1.2.3