From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/52xx/lite5200_sleep.S | 422 +++++++++++++++++++++++++++ 1 file changed, 422 insertions(+) create mode 100644 arch/powerpc/platforms/52xx/lite5200_sleep.S (limited to 'arch/powerpc/platforms/52xx/lite5200_sleep.S') diff --git a/arch/powerpc/platforms/52xx/lite5200_sleep.S b/arch/powerpc/platforms/52xx/lite5200_sleep.S new file mode 100644 index 000000000..0b12647e7 --- /dev/null +++ b/arch/powerpc/platforms/52xx/lite5200_sleep.S @@ -0,0 +1,422 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include + +#include +#include +#include +#include + + +#define SDRAM_CTRL 0x104 +#define SC_MODE_EN (1<<31) +#define SC_CKE (1<<30) +#define SC_REF_EN (1<<28) +#define SC_SOFT_PRE (1<<1) + +#define GPIOW_GPIOE 0xc00 +#define GPIOW_DDR 0xc08 +#define GPIOW_DVO 0xc0c + +#define CDM_CE 0x214 +#define CDM_SDRAM (1<<3) + + +/* helpers... beware: r10 and r4 are overwritten */ +#define SAVE_SPRN(reg, addr) \ + mfspr r10, SPRN_##reg; \ + stw r10, ((addr)*4)(r4); + +#define LOAD_SPRN(reg, addr) \ + lwz r10, ((addr)*4)(r4); \ + mtspr SPRN_##reg, r10; \ + sync; \ + isync; + + + .data +registers: + .space 0x5c*4 + .text + +/* ---------------------------------------------------------------------- */ +/* low-power mode with help of M68HLC908QT1 */ + + .globl lite5200_low_power +lite5200_low_power: + + mr r7, r3 /* save SRAM va */ + mr r8, r4 /* save MBAR va */ + + /* setup wakeup address for u-boot at physical location 0x0 */ + lis r3, CONFIG_KERNEL_START@h + lis r4, lite5200_wakeup@h + ori r4, r4, lite5200_wakeup@l + sub r4, r4, r3 + stw r4, 0(r3) + + + /* + * save stuff BDI overwrites + * 0xf0 (0xe0->0x100 gets overwritten when BDI connected; + * even when CONFIG_BDI_SWITCH is disabled and MMU XLAT commented; heisenbug?)) + * WARNING: self-refresh doesn't seem to work when BDI2000 is connected, + * possibly because BDI sets SDRAM registers before wakeup code does + */ + lis r4, registers@h + ori r4, r4, registers@l + lwz r10, 0xf0(r3) + stw r10, (0x1d*4)(r4) + + /* save registers to r4 [destroys r10] */ + SAVE_SPRN(LR, 0x1c) + bl save_regs + + /* flush caches [destroys r3, r4] */ + bl flush_data_cache + + + /* copy code to sram */ + mr r4, r7 + li r3, (sram_code_end - sram_code)/4 + mtctr r3 + lis r3, sram_code@h + ori r3, r3, sram_code@l +1: + lwz r5, 0(r3) + stw r5, 0(r4) + addi r3, r3, 4 + addi r4, r4, 4 + bdnz 1b + + /* get tb_ticks_per_usec */ + lis r3, tb_ticks_per_usec@h + lwz r11, tb_ticks_per_usec@l(r3) + + /* disable I and D caches */ + mfspr r3, SPRN_HID0 + ori r3, r3, HID0_ICE | HID0_DCE + xori r3, r3, HID0_ICE | HID0_DCE + sync; isync; + mtspr SPRN_HID0, r3 + sync; isync; + + /* jump to sram */ + mtlr r7 + blrl + /* doesn't return */ + + +sram_code: + /* self refresh */ + lwz r4, SDRAM_CTRL(r8) + + /* send NOP (precharge) */ + oris r4, r4, SC_MODE_EN@h /* mode_en */ + stw r4, SDRAM_CTRL(r8) + sync + + ori r4, r4, SC_SOFT_PRE /* soft_pre */ + stw r4, SDRAM_CTRL(r8) + sync + xori r4, r4, SC_SOFT_PRE + + xoris r4, r4, SC_MODE_EN@h /* !mode_en */ + stw r4, SDRAM_CTRL(r8) + sync + + /* delay (for NOP to finish) */ + li r12, 1 + bl udelay + + /* + * mode_en must not be set when enabling self-refresh + * send AR with CKE low (self-refresh) + */ + oris r4, r4, (SC_REF_EN | SC_CKE)@h + xoris r4, r4, (SC_CKE)@h /* ref_en !cke */ + stw r4, SDRAM_CTRL(r8) + sync + + /* delay (after !CKE there should be two cycles) */ + li r12, 1 + bl udelay + + /* disable clock */ + lwz r4, CDM_CE(r8) + ori r4, r4, CDM_SDRAM + xori r4, r4, CDM_SDRAM + stw r4, CDM_CE(r8) + sync + + /* delay a bit */ + li r12, 1 + bl udelay + + + /* turn off with QT chip */ + li r4, 0x02 + stb r4, GPIOW_GPIOE(r8) /* enable gpio_wkup1 */ + sync + + stb r4, GPIOW_DVO(r8) /* "output" high */ + sync + stb r4, GPIOW_DDR(r8) /* output */ + sync + stb r4, GPIOW_DVO(r8) /* output high */ + sync + + /* 10uS delay */ + li r12, 10 + bl udelay + + /* turn off */ + li r4, 0 + stb r4, GPIOW_DVO(r8) /* output low */ + sync + + /* wait until we're offline */ + 1: + b 1b + + + /* local udelay in sram is needed */ +SYM_FUNC_START_LOCAL(udelay) + /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */ + mullw r12, r12, r11 + mftb r13 /* start */ + add r12, r13, r12 /* end */ + 1: + mftb r13 /* current */ + cmp cr0, r13, r12 + blt 1b + blr +SYM_FUNC_END(udelay) + +sram_code_end: + + + +/* uboot jumps here on resume */ +lite5200_wakeup: + bl restore_regs + + + /* HIDs, MSR */ + LOAD_SPRN(HID1, 0x19) + LOAD_SPRN(HID2, 0x1a) + + + /* address translation is tricky (see turn_on_mmu) */ + mfmsr r10 + ori r10, r10, MSR_DR | MSR_IR + + + mtspr SPRN_SRR1, r10 + lis r10, mmu_on@h + ori r10, r10, mmu_on@l + mtspr SPRN_SRR0, r10 + sync + rfi +mmu_on: + /* kernel offset (r4 is still set from restore_registers) */ + addis r4, r4, CONFIG_KERNEL_START@h + + + /* restore MSR */ + lwz r10, (4*0x1b)(r4) + mtmsr r10 + sync; isync; + + /* invalidate caches */ + mfspr r10, SPRN_HID0 + ori r5, r10, HID0_ICFI | HID0_DCI + mtspr SPRN_HID0, r5 /* invalidate caches */ + sync; isync; + mtspr SPRN_HID0, r10 + sync; isync; + + /* enable caches */ + lwz r10, (4*0x18)(r4) + mtspr SPRN_HID0, r10 /* restore (enable caches, DPM) */ + /* ^ this has to be after address translation set in MSR */ + sync + isync + + + /* restore 0xf0 (BDI2000) */ + lis r3, CONFIG_KERNEL_START@h + lwz r10, (0x1d*4)(r4) + stw r10, 0xf0(r3) + + LOAD_SPRN(LR, 0x1c) + + + blr +_ASM_NOKPROBE_SYMBOL(lite5200_wakeup) + + +/* ---------------------------------------------------------------------- */ +/* boring code: helpers */ + +/* save registers */ +#define SAVE_BAT(n, addr) \ + SAVE_SPRN(DBAT##n##L, addr); \ + SAVE_SPRN(DBAT##n##U, addr+1); \ + SAVE_SPRN(IBAT##n##L, addr+2); \ + SAVE_SPRN(IBAT##n##U, addr+3); + +#define SAVE_SR(n, addr) \ + mfsr r10, n; \ + stw r10, ((addr)*4)(r4); + +#define SAVE_4SR(n, addr) \ + SAVE_SR(n, addr); \ + SAVE_SR(n+1, addr+1); \ + SAVE_SR(n+2, addr+2); \ + SAVE_SR(n+3, addr+3); + +SYM_FUNC_START_LOCAL(save_regs) + stw r0, 0(r4) + stw r1, 0x4(r4) + stw r2, 0x8(r4) + stmw r11, 0xc(r4) /* 0xc -> 0x5f, (0x18*4-1) */ + + SAVE_SPRN(HID0, 0x18) + SAVE_SPRN(HID1, 0x19) + SAVE_SPRN(HID2, 0x1a) + mfmsr r10 + stw r10, (4*0x1b)(r4) + /*SAVE_SPRN(LR, 0x1c) have to save it before the call */ + /* 0x1d reserved by 0xf0 */ + SAVE_SPRN(RPA, 0x1e) + SAVE_SPRN(SDR1, 0x1f) + + /* save MMU regs */ + SAVE_BAT(0, 0x20) + SAVE_BAT(1, 0x24) + SAVE_BAT(2, 0x28) + SAVE_BAT(3, 0x2c) + SAVE_BAT(4, 0x30) + SAVE_BAT(5, 0x34) + SAVE_BAT(6, 0x38) + SAVE_BAT(7, 0x3c) + + SAVE_4SR(0, 0x40) + SAVE_4SR(4, 0x44) + SAVE_4SR(8, 0x48) + SAVE_4SR(12, 0x4c) + + SAVE_SPRN(SPRG0, 0x50) + SAVE_SPRN(SPRG1, 0x51) + SAVE_SPRN(SPRG2, 0x52) + SAVE_SPRN(SPRG3, 0x53) + SAVE_SPRN(SPRG4, 0x54) + SAVE_SPRN(SPRG5, 0x55) + SAVE_SPRN(SPRG6, 0x56) + SAVE_SPRN(SPRG7, 0x57) + + SAVE_SPRN(IABR, 0x58) + SAVE_SPRN(DABR, 0x59) + SAVE_SPRN(TBRL, 0x5a) + SAVE_SPRN(TBRU, 0x5b) + + blr +SYM_FUNC_END(save_regs) + + +/* restore registers */ +#define LOAD_BAT(n, addr) \ + LOAD_SPRN(DBAT##n##L, addr); \ + LOAD_SPRN(DBAT##n##U, addr+1); \ + LOAD_SPRN(IBAT##n##L, addr+2); \ + LOAD_SPRN(IBAT##n##U, addr+3); + +#define LOAD_SR(n, addr) \ + lwz r10, ((addr)*4)(r4); \ + mtsr n, r10; + +#define LOAD_4SR(n, addr) \ + LOAD_SR(n, addr); \ + LOAD_SR(n+1, addr+1); \ + LOAD_SR(n+2, addr+2); \ + LOAD_SR(n+3, addr+3); + +SYM_FUNC_START_LOCAL(restore_regs) + lis r4, registers@h + ori r4, r4, registers@l + + /* MMU is not up yet */ + subis r4, r4, CONFIG_KERNEL_START@h + + lwz r0, 0(r4) + lwz r1, 0x4(r4) + lwz r2, 0x8(r4) + lmw r11, 0xc(r4) + + /* + * these are a bit tricky + * + * 0x18 - HID0 + * 0x19 - HID1 + * 0x1a - HID2 + * 0x1b - MSR + * 0x1c - LR + * 0x1d - reserved by 0xf0 (BDI2000) + */ + LOAD_SPRN(RPA, 0x1e); + LOAD_SPRN(SDR1, 0x1f); + + /* restore MMU regs */ + LOAD_BAT(0, 0x20) + LOAD_BAT(1, 0x24) + LOAD_BAT(2, 0x28) + LOAD_BAT(3, 0x2c) + LOAD_BAT(4, 0x30) + LOAD_BAT(5, 0x34) + LOAD_BAT(6, 0x38) + LOAD_BAT(7, 0x3c) + + LOAD_4SR(0, 0x40) + LOAD_4SR(4, 0x44) + LOAD_4SR(8, 0x48) + LOAD_4SR(12, 0x4c) + + /* rest of regs */ + LOAD_SPRN(SPRG0, 0x50); + LOAD_SPRN(SPRG1, 0x51); + LOAD_SPRN(SPRG2, 0x52); + LOAD_SPRN(SPRG3, 0x53); + LOAD_SPRN(SPRG4, 0x54); + LOAD_SPRN(SPRG5, 0x55); + LOAD_SPRN(SPRG6, 0x56); + LOAD_SPRN(SPRG7, 0x57); + + LOAD_SPRN(IABR, 0x58); + LOAD_SPRN(DABR, 0x59); + LOAD_SPRN(TBWL, 0x5a); /* these two have separate R/W regs */ + LOAD_SPRN(TBWU, 0x5b); + + blr +_ASM_NOKPROBE_SYMBOL(restore_regs) +SYM_FUNC_END(restore_regs) + + + +/* cache flushing code. copied from arch/ppc/boot/util.S */ +#define NUM_CACHE_LINES (128*8) + +/* + * Flush data cache + * Do this by just reading lots of stuff into the cache. + */ +SYM_FUNC_START_LOCAL(flush_data_cache) + lis r3,CONFIG_KERNEL_START@h + ori r3,r3,CONFIG_KERNEL_START@l + li r4,NUM_CACHE_LINES + mtctr r4 +1: + lwz r4,0(r3) + addi r3,r3,L1_CACHE_BYTES /* Next line, please */ + bdnz 1b + blr +SYM_FUNC_END(flush_data_cache) -- cgit v1.2.3