From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/82xx/Kconfig | 72 ++++++ arch/powerpc/platforms/82xx/Makefile | 10 + arch/powerpc/platforms/82xx/ep8248e.c | 322 +++++++++++++++++++++++++++ arch/powerpc/platforms/82xx/km82xx.c | 209 +++++++++++++++++ arch/powerpc/platforms/82xx/m82xx_pci.h | 14 ++ arch/powerpc/platforms/82xx/mpc8272_ads.c | 213 ++++++++++++++++++ arch/powerpc/platforms/82xx/pq2.c | 80 +++++++ arch/powerpc/platforms/82xx/pq2.h | 21 ++ arch/powerpc/platforms/82xx/pq2ads-pci-pic.c | 172 ++++++++++++++ arch/powerpc/platforms/82xx/pq2ads.h | 40 ++++ arch/powerpc/platforms/82xx/pq2fads.c | 191 ++++++++++++++++ 11 files changed, 1344 insertions(+) create mode 100644 arch/powerpc/platforms/82xx/Kconfig create mode 100644 arch/powerpc/platforms/82xx/Makefile create mode 100644 arch/powerpc/platforms/82xx/ep8248e.c create mode 100644 arch/powerpc/platforms/82xx/km82xx.c create mode 100644 arch/powerpc/platforms/82xx/m82xx_pci.h create mode 100644 arch/powerpc/platforms/82xx/mpc8272_ads.c create mode 100644 arch/powerpc/platforms/82xx/pq2.c create mode 100644 arch/powerpc/platforms/82xx/pq2.h create mode 100644 arch/powerpc/platforms/82xx/pq2ads-pci-pic.c create mode 100644 arch/powerpc/platforms/82xx/pq2ads.h create mode 100644 arch/powerpc/platforms/82xx/pq2fads.c (limited to 'arch/powerpc/platforms/82xx') diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig new file mode 100644 index 000000000..1af81de1c --- /dev/null +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +menuconfig PPC_82xx + bool "82xx-based boards (PQ II)" + depends on PPC_BOOK3S_32 + +if PPC_82xx + +config MPC8272_ADS + bool "Freescale MPC8272 ADS" + select DEFAULT_UIMAGE + select PQ2ADS + select 8272 + select 8260 + select FSL_SOC + select PQ2_ADS_PCI_PIC if PCI + help + This option enables support for the MPC8272 ADS board + +config PQ2FADS + bool "Freescale PQ2FADS" + select DEFAULT_UIMAGE + select PQ2ADS + select 8260 + select FSL_SOC + select PQ2_ADS_PCI_PIC if PCI + help + This option enables support for the PQ2FADS board + +config EP8248E + bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)" + select 8272 + select 8260 + select FSL_SOC + select PHYLIB if NETDEVICES + select MDIO_BITBANG if PHYLIB + help + This enables support for the Embedded Planet EP8248E board. + + This board is also resold by Freescale as the QUICCStart + MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE. + +config MGCOGE + bool "Keymile MGCOGE" + select 8272 + select 8260 + select FSL_SOC + help + This enables support for the Keymile MGCOGE board. + +endif + +config PQ2ADS + bool + +config 8260 + bool + depends on PPC_BOOK3S_32 + select CPM2 + help + The MPC8260 is a typical embedded CPU made by Freescale. Selecting + this option means that you wish to build a kernel for a machine with + an 8260 class CPU. + +config 8272 + bool + select 8260 + help + The MPC8272 CPM has a different internal dpram setup than other CPM2 + devices + +config PQ2_ADS_PCI_PIC + bool diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile new file mode 100644 index 000000000..8d713c601 --- /dev/null +++ b/arch/powerpc/platforms/82xx/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the PowerPC 82xx linux kernel. +# +obj-$(CONFIG_MPC8272_ADS) += mpc8272_ads.o +obj-$(CONFIG_CPM2) += pq2.o +obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o +obj-$(CONFIG_PQ2FADS) += pq2fads.o +obj-$(CONFIG_EP8248E) += ep8248e.o +obj-$(CONFIG_MGCOGE) += km82xx.o diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c new file mode 100644 index 000000000..28e627f8a --- /dev/null +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Embedded Planet EP8248E support + * + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "pq2.h" + +static u8 __iomem *ep8248e_bcsr; +static struct device_node *ep8248e_bcsr_node; + +#define BCSR7_SCC2_ENABLE 0x10 + +#define BCSR8_PHY1_ENABLE 0x80 +#define BCSR8_PHY1_POWER 0x40 +#define BCSR8_PHY2_ENABLE 0x20 +#define BCSR8_PHY2_POWER 0x10 +#define BCSR8_MDIO_READ 0x04 +#define BCSR8_MDIO_CLOCK 0x02 +#define BCSR8_MDIO_DATA 0x01 + +#define BCSR9_USB_ENABLE 0x80 +#define BCSR9_USB_POWER 0x40 +#define BCSR9_USB_HOST 0x20 +#define BCSR9_USB_FULL_SPEED_TARGET 0x10 + +static void __init ep8248e_pic_init(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic"); + if (!np) { + printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + return; + } + + cpm2_pic_init(np); + of_node_put(np); +} + +static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level) +{ + if (level) + setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK); + else + clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK); + + /* Read back to flush the write. */ + in_8(&ep8248e_bcsr[8]); +} + +static void ep8248e_set_mdio_dir(struct mdiobb_ctrl *ctrl, int output) +{ + if (output) + clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ); + else + setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ); + + /* Read back to flush the write. */ + in_8(&ep8248e_bcsr[8]); +} + +static void ep8248e_set_mdio_data(struct mdiobb_ctrl *ctrl, int data) +{ + if (data) + setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA); + else + clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA); + + /* Read back to flush the write. */ + in_8(&ep8248e_bcsr[8]); +} + +static int ep8248e_get_mdio_data(struct mdiobb_ctrl *ctrl) +{ + return in_8(&ep8248e_bcsr[8]) & BCSR8_MDIO_DATA; +} + +static const struct mdiobb_ops ep8248e_mdio_ops = { + .set_mdc = ep8248e_set_mdc, + .set_mdio_dir = ep8248e_set_mdio_dir, + .set_mdio_data = ep8248e_set_mdio_data, + .get_mdio_data = ep8248e_get_mdio_data, + .owner = THIS_MODULE, +}; + +static struct mdiobb_ctrl ep8248e_mdio_ctrl = { + .ops = &ep8248e_mdio_ops, +}; + +static int ep8248e_mdio_probe(struct platform_device *ofdev) +{ + struct mii_bus *bus; + struct resource res; + struct device_node *node; + int ret; + + node = of_get_parent(ofdev->dev.of_node); + of_node_put(node); + if (node != ep8248e_bcsr_node) + return -ENODEV; + + ret = of_address_to_resource(ofdev->dev.of_node, 0, &res); + if (ret) + return ret; + + bus = alloc_mdio_bitbang(&ep8248e_mdio_ctrl); + if (!bus) + return -ENOMEM; + + bus->name = "ep8248e-mdio-bitbang"; + bus->parent = &ofdev->dev; + snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start); + + ret = of_mdiobus_register(bus, ofdev->dev.of_node); + if (ret) + goto err_free_bus; + + return 0; +err_free_bus: + free_mdio_bitbang(bus); + return ret; +} + +static int ep8248e_mdio_remove(struct platform_device *ofdev) +{ + BUG(); + return 0; +} + +static const struct of_device_id ep8248e_mdio_match[] = { + { + .compatible = "fsl,ep8248e-mdio-bitbang", + }, + {}, +}; + +static struct platform_driver ep8248e_mdio_driver = { + .driver = { + .name = "ep8248e-mdio-bitbang", + .of_match_table = ep8248e_mdio_match, + }, + .probe = ep8248e_mdio_probe, + .remove = ep8248e_mdio_remove, +}; + +struct cpm_pin { + int port, pin, flags; +}; + +static __initdata struct cpm_pin ep8248e_pins[] = { + /* SMC1 */ + {2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + /* SCC1 */ + {2, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC1 */ + {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC2 */ + {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* I2C */ + {4, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {4, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + + /* USB */ + {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ep8248e_pins); i++) { + const struct cpm_pin *pin = &ep8248e_pins[i]; + cpm2_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); /* USB */ + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); +} + +static void __init ep8248e_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("ep8248e_setup_arch()", 0); + + cpm2_reset(); + + /* When this is set, snooping CPM DMA from RAM causes + * machine checks. See erratum SIU18. + */ + clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP); + + ep8248e_bcsr_node = + of_find_compatible_node(NULL, NULL, "fsl,ep8248e-bcsr"); + if (!ep8248e_bcsr_node) { + printk(KERN_ERR "No bcsr in device tree\n"); + return; + } + + ep8248e_bcsr = of_iomap(ep8248e_bcsr_node, 0); + if (!ep8248e_bcsr) { + printk(KERN_ERR "Cannot map BCSR registers\n"); + of_node_put(ep8248e_bcsr_node); + ep8248e_bcsr_node = NULL; + return; + } + + setbits8(&ep8248e_bcsr[7], BCSR7_SCC2_ENABLE); + setbits8(&ep8248e_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER | + BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER); + + init_ioports(); + + if (ppc_md.progress) + ppc_md.progress("ep8248e_setup_arch(), finish", 0); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .compatible = "simple-bus", }, + { .compatible = "fsl,ep8248e-bcsr", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + if (IS_ENABLED(CONFIG_MDIO_BITBANG)) + platform_driver_register(&ep8248e_mdio_driver); + + return 0; +} +machine_device_initcall(ep8248e, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ep8248e_probe(void) +{ + return of_machine_is_compatible("fsl,ep8248e"); +} + +define_machine(ep8248e) +{ + .name = "Embedded Planet EP8248E", + .probe = ep8248e_probe, + .setup_arch = ep8248e_setup_arch, + .init_IRQ = ep8248e_pic_init, + .get_irq = cpm2_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = pq2_restart, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/82xx/km82xx.c b/arch/powerpc/platforms/82xx/km82xx.c new file mode 100644 index 000000000..1c8bbf425 --- /dev/null +++ b/arch/powerpc/platforms/82xx/km82xx.c @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Keymile km82xx support + * Copyright 2008-2011 DENX Software Engineering GmbH + * Author: Heiko Schocher + * + * based on code from: + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "pq2.h" + +static void __init km82xx_pic_init(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "fsl,pq2-pic"); + if (!np) { + pr_err("PIC init: can not find cpm-pic node\n"); + return; + } + + cpm2_pic_init(np); + of_node_put(np); +} + +struct cpm_pin { + int port, pin, flags; +}; + +static __initdata struct cpm_pin km82xx_pins[] = { + /* SMC1 */ + {2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + /* SMC2 */ + {0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + /* SCC1 */ + {2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + + /* SCC4 */ + {2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + /* FCC1 */ + {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + + {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC2 */ + {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* MDC */ + {0, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, + +#if defined(CONFIG_I2C_CPM) + /* I2C */ + {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, + {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, +#endif + + /* USB */ + {0, 10, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, /* FULL_SPEED */ + {0, 11, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, /*/SLAVE */ + {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXN */ + {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXP */ + {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* /OE */ + {2, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXCLK */ + {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXP */ + {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXN */ + {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXD */ + + /* SPI */ + {3, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MISO PD16 */ + {3, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MOSI PD17 */ + {3, 18, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_CLK PD18 */ +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(km82xx_pins); i++) { + const struct cpm_pin *pin = &km82xx_pins[i]; + cpm2_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8); + cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RTX); + cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); + + /* Force USB FULL SPEED bit to '1' */ + setbits32(&cpm2_immr->im_ioport.iop_pdata, 1 << (31 - 10)); + /* clear USB_SLAVE */ + clrbits32(&cpm2_immr->im_ioport.iop_pdata, 1 << (31 - 11)); +} + +static void __init km82xx_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("km82xx_setup_arch()", 0); + + cpm2_reset(); + + /* When this is set, snooping CPM DMA from RAM causes + * machine checks. See erratum SIU18. + */ + clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP); + + init_ioports(); + + if (ppc_md.progress) + ppc_md.progress("km82xx_setup_arch(), finish", 0); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(km82xx, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init km82xx_probe(void) +{ + return of_machine_is_compatible("keymile,km82xx"); +} + +define_machine(km82xx) +{ + .name = "Keymile km82xx", + .probe = km82xx_probe, + .setup_arch = km82xx_setup_arch, + .init_IRQ = km82xx_pic_init, + .get_irq = cpm2_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = pq2_restart, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/82xx/m82xx_pci.h b/arch/powerpc/platforms/82xx/m82xx_pci.h new file mode 100644 index 000000000..d07c4d760 --- /dev/null +++ b/arch/powerpc/platforms/82xx/m82xx_pci.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _PPC_KERNEL_M82XX_PCI_H +#define _PPC_KERNEL_M82XX_PCI_H + +/* + */ + +#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) + +#ifndef _IO_BASE +#define _IO_BASE isa_io_base +#endif + +#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c new file mode 100644 index 000000000..0b5b9dec1 --- /dev/null +++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8272 ADS board support + * + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood + * + * Based on code by Vitaly Bordug + * Copyright (c) 2006 MontaVista Software, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include +#include + +#include "pq2.h" + +static void __init mpc8272_ads_pic_init(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "fsl,cpm2-pic"); + if (!np) { + printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); + return; + } + + cpm2_pic_init(np); + of_node_put(np); + + /* Initialize stuff for the 82xx CPLD IC and install demux */ + pq2ads_pci_init_irq(); +} + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin mpc8272_ads_pins[] = { + /* SCC1 */ + {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* SCC4 */ + {3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC1 */ + {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC2 */ + {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* I2C */ + {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, + {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, + + /* USB */ + {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mpc8272_ads_pins); i++) { + struct cpm_pin *pin = &mpc8272_ads_pins[i]; + cpm2_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK15, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK16, CPM_CLK_TX); +} + +static void __init mpc8272_ads_setup_arch(void) +{ + struct device_node *np; + __be32 __iomem *bcsr; + + if (ppc_md.progress) + ppc_md.progress("mpc8272_ads_setup_arch()", 0); + + cpm2_reset(); + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc8272ads-bcsr"); + if (!np) { + printk(KERN_ERR "No bcsr in device tree\n"); + return; + } + + bcsr = of_iomap(np, 0); + of_node_put(np); + if (!bcsr) { + printk(KERN_ERR "Cannot map BCSR registers\n"); + return; + } + +#define BCSR1_FETHIEN 0x08000000 +#define BCSR1_FETH_RST 0x04000000 +#define BCSR1_RS232_EN1 0x02000000 +#define BCSR1_RS232_EN2 0x01000000 +#define BCSR3_USB_nEN 0x80000000 +#define BCSR3_FETHIEN2 0x10000000 +#define BCSR3_FETH2_RST 0x08000000 + + clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN); + setbits32(&bcsr[1], BCSR1_FETH_RST); + + clrbits32(&bcsr[3], BCSR3_FETHIEN2); + setbits32(&bcsr[3], BCSR3_FETH2_RST); + + clrbits32(&bcsr[3], BCSR3_USB_nEN); + + iounmap(bcsr); + + init_ioports(); + + if (ppc_md.progress) + ppc_md.progress("mpc8272_ads_setup_arch(), finish", 0); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(mpc8272_ads, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc8272_ads_probe(void) +{ + return of_machine_is_compatible("fsl,mpc8272ads"); +} + +define_machine(mpc8272_ads) +{ + .name = "Freescale MPC8272 ADS", + .probe = mpc8272_ads_probe, + .setup_arch = mpc8272_ads_setup_arch, + .discover_phbs = pq2_init_pci, + .init_IRQ = mpc8272_ads_pic_init, + .get_irq = cpm2_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = pq2_restart, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/82xx/pq2.c b/arch/powerpc/platforms/82xx/pq2.c new file mode 100644 index 000000000..3b5cb39a5 --- /dev/null +++ b/arch/powerpc/platforms/82xx/pq2.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Common PowerQUICC II code. + * + * Author: Scott Wood + * Copyright (c) 2007 Freescale Semiconductor + * + * Based on code by Vitaly Bordug + * pq2_restart fix by Wade Farnsworth + * Copyright (c) 2006 MontaVista Software, Inc. + */ + +#include + +#include +#include +#include + +#include + +#define RMR_CSRE 0x00000001 + +void __noreturn pq2_restart(char *cmd) +{ + local_irq_disable(); + setbits32(&cpm2_immr->im_clkrst.car_rmr, RMR_CSRE); + + /* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */ + mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR)); + in_8(&cpm2_immr->im_clkrst.res[0]); + + panic("Restart failed\n"); +} +NOKPROBE_SYMBOL(pq2_restart) + +#ifdef CONFIG_PCI +static int pq2_pci_exclude_device(struct pci_controller *hose, + u_char bus, u8 devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +static void __init pq2_pci_add_bridge(struct device_node *np) +{ + struct pci_controller *hose; + struct resource r; + + if (of_address_to_resource(np, 0, &r) || r.end - r.start < 0x10b) + goto err; + + pci_add_flags(PCI_REASSIGN_ALL_BUS); + + hose = pcibios_alloc_controller(np); + if (!hose) + return; + + hose->dn = np; + + setup_indirect_pci(hose, r.start + 0x100, r.start + 0x104, 0); + pci_process_bridge_OF_ranges(hose, np, 1); + + return; + +err: + printk(KERN_ERR "No valid PCI reg property in device tree\n"); +} + +void __init pq2_init_pci(void) +{ + struct device_node *np; + + ppc_md.pci_exclude_device = pq2_pci_exclude_device; + + for_each_compatible_node(np, NULL, "fsl,pq2-pci") + pq2_pci_add_bridge(np); +} +#endif diff --git a/arch/powerpc/platforms/82xx/pq2.h b/arch/powerpc/platforms/82xx/pq2.h new file mode 100644 index 000000000..902ef0bd4 --- /dev/null +++ b/arch/powerpc/platforms/82xx/pq2.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PQ2_H +#define _PQ2_H + +void __noreturn pq2_restart(char *cmd); + +#ifdef CONFIG_PCI +int pq2ads_pci_init_irq(void); +void pq2_init_pci(void); +#else +static inline int pq2ads_pci_init_irq(void) +{ + return 0; +} + +static inline void pq2_init_pci(void) +{ +} +#endif + +#endif diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c new file mode 100644 index 000000000..cf3210042 --- /dev/null +++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PQ2 ADS-style PCI interrupt controller + * + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood + * + * Loosely based on mpc82xx ADS support by Vitaly Bordug + * Copyright (c) 2006 MontaVista Software, Inc. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "pq2.h" + +static DEFINE_RAW_SPINLOCK(pci_pic_lock); + +struct pq2ads_pci_pic { + struct device_node *node; + struct irq_domain *host; + + struct { + u32 stat; + u32 mask; + } __iomem *regs; +}; + +#define NUM_IRQS 32 + +static void pq2ads_pci_mask_irq(struct irq_data *d) +{ + struct pq2ads_pci_pic *priv = irq_data_get_irq_chip_data(d); + int irq = NUM_IRQS - irqd_to_hwirq(d) - 1; + + if (irq != -1) { + unsigned long flags; + raw_spin_lock_irqsave(&pci_pic_lock, flags); + + setbits32(&priv->regs->mask, 1 << irq); + mb(); + + raw_spin_unlock_irqrestore(&pci_pic_lock, flags); + } +} + +static void pq2ads_pci_unmask_irq(struct irq_data *d) +{ + struct pq2ads_pci_pic *priv = irq_data_get_irq_chip_data(d); + int irq = NUM_IRQS - irqd_to_hwirq(d) - 1; + + if (irq != -1) { + unsigned long flags; + + raw_spin_lock_irqsave(&pci_pic_lock, flags); + clrbits32(&priv->regs->mask, 1 << irq); + raw_spin_unlock_irqrestore(&pci_pic_lock, flags); + } +} + +static struct irq_chip pq2ads_pci_ic = { + .name = "PQ2 ADS PCI", + .irq_mask = pq2ads_pci_mask_irq, + .irq_mask_ack = pq2ads_pci_mask_irq, + .irq_ack = pq2ads_pci_mask_irq, + .irq_unmask = pq2ads_pci_unmask_irq, + .irq_enable = pq2ads_pci_unmask_irq, + .irq_disable = pq2ads_pci_mask_irq +}; + +static void pq2ads_pci_irq_demux(struct irq_desc *desc) +{ + struct pq2ads_pci_pic *priv = irq_desc_get_handler_data(desc); + u32 stat, mask, pend; + int bit; + + for (;;) { + stat = in_be32(&priv->regs->stat); + mask = in_be32(&priv->regs->mask); + + pend = stat & ~mask; + + if (!pend) + break; + + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + generic_handle_domain_irq(priv->host, bit); + } + } +} + +static int pci_pic_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_data(virq, h->host_data); + irq_set_chip_and_handler(virq, &pq2ads_pci_ic, handle_level_irq); + return 0; +} + +static const struct irq_domain_ops pci_pic_host_ops = { + .map = pci_pic_host_map, +}; + +int __init pq2ads_pci_init_irq(void) +{ + struct pq2ads_pci_pic *priv; + struct irq_domain *host; + struct device_node *np; + int ret = -ENODEV; + int irq; + + np = of_find_compatible_node(NULL, NULL, "fsl,pq2ads-pci-pic"); + if (!np) { + printk(KERN_ERR "No pci pic node in device tree.\n"); + goto out; + } + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + printk(KERN_ERR "No interrupt in pci pic node.\n"); + goto out_put_node; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto out_unmap_irq; + } + + /* PCI interrupt controller registers: status and mask */ + priv->regs = of_iomap(np, 0); + if (!priv->regs) { + printk(KERN_ERR "Cannot map PCI PIC registers.\n"); + goto out_free_kmalloc; + } + + /* mask all PCI interrupts */ + out_be32(&priv->regs->mask, ~0); + mb(); + + host = irq_domain_add_linear(np, NUM_IRQS, &pci_pic_host_ops, priv); + if (!host) { + ret = -ENOMEM; + goto out_unmap_regs; + } + + priv->host = host; + irq_set_handler_data(irq, priv); + irq_set_chained_handler(irq, pq2ads_pci_irq_demux); + ret = 0; + goto out_put_node; + +out_unmap_regs: + iounmap(priv->regs); +out_free_kmalloc: + kfree(priv); +out_unmap_irq: + irq_dispose_mapping(irq); +out_put_node: + of_node_put(np); +out: + return ret; +} diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h new file mode 100644 index 000000000..9d0bf7449 --- /dev/null +++ b/arch/powerpc/platforms/82xx/pq2ads.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * PQ2/mpc8260 board-specific stuff + * + * A collection of structures, addresses, and values associated with + * the Freescale MPC8260ADS/MPC8266ADS-PCI boards. + * Copied from the RPX-Classic and SBS8260 stuff. + * + * Author: Vitaly Bordug + * + * Originally written by Dan Malek for Motorola MPC8260 family + * + * Copyright (c) 2001 Dan Malek + * Copyright (c) 2006 MontaVista Software, Inc. + */ + +#ifdef __KERNEL__ +#ifndef __MACH_ADS8260_DEFS +#define __MACH_ADS8260_DEFS + +#include + +/* The ADS8260 has 16, 32-bit wide control/status registers, accessed + * only on word boundaries. + * Not all are used (yet), or are interesting to us (yet). + */ + +/* Things of interest in the CSR. + */ +#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */ +#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */ +#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable*/ +#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */ +#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */ +#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */ +#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/ +#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */ + +#endif /* __MACH_ADS8260_DEFS */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/82xx/pq2fads.c b/arch/powerpc/platforms/82xx/pq2fads.c new file mode 100644 index 000000000..ac9113d52 --- /dev/null +++ b/arch/powerpc/platforms/82xx/pq2fads.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PQ2FADS board support + * + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood + * + * Loosely based on mp82xx ADS support by Vitaly Bordug + * Copyright (c) 2006 MontaVista Software, Inc. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include "pq2ads.h" +#include "pq2.h" + +static void __init pq2fads_pic_init(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); + if (!np) { + printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); + return; + } + + cpm2_pic_init(np); + of_node_put(np); + + /* Initialize stuff for the 82xx CPLD IC and install demux */ + pq2ads_pci_init_irq(); +} + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin pq2fads_pins[] = { + /* SCC1 */ + {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* SCC2 */ + {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC2 */ + {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC3 */ + {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pq2fads_pins); i++) { + struct cpm_pin *pin = &pq2fads_pins[i]; + cpm2_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX); +} + +static void __init pq2fads_setup_arch(void) +{ + struct device_node *np; + __be32 __iomem *bcsr; + + if (ppc_md.progress) + ppc_md.progress("pq2fads_setup_arch()", 0); + + cpm2_reset(); + + np = of_find_compatible_node(NULL, NULL, "fsl,pq2fads-bcsr"); + if (!np) { + printk(KERN_ERR "No fsl,pq2fads-bcsr in device tree\n"); + return; + } + + bcsr = of_iomap(np, 0); + of_node_put(np); + if (!bcsr) { + printk(KERN_ERR "Cannot map BCSR registers\n"); + return; + } + + /* Enable the serial and ethernet ports */ + + clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN); + setbits32(&bcsr[1], BCSR1_FETH_RST); + + clrbits32(&bcsr[3], BCSR3_FETHIEN2); + setbits32(&bcsr[3], BCSR3_FETH2_RST); + + iounmap(bcsr); + + init_ioports(); + + /* Enable external IRQs */ + clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_siumcr, 0x0c000000); + + if (ppc_md.progress) + ppc_md.progress("pq2fads_setup_arch(), finish", 0); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init pq2fads_probe(void) +{ + return of_machine_is_compatible("fsl,pq2fads"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(pq2fads, declare_of_platform_devices); + +define_machine(pq2fads) +{ + .name = "Freescale PQ2FADS", + .probe = pq2fads_probe, + .setup_arch = pq2fads_setup_arch, + .discover_phbs = pq2_init_pci, + .init_IRQ = pq2fads_pic_init, + .get_irq = cpm2_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = pq2_restart, + .progress = udbg_progress, +}; -- cgit v1.2.3