From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/8xx/cpm1-ic.c | 188 +++++++++++++++++++++++++++++++++++ 1 file changed, 188 insertions(+) create mode 100644 arch/powerpc/platforms/8xx/cpm1-ic.c (limited to 'arch/powerpc/platforms/8xx/cpm1-ic.c') diff --git a/arch/powerpc/platforms/8xx/cpm1-ic.c b/arch/powerpc/platforms/8xx/cpm1-ic.c new file mode 100644 index 000000000..a18fc7c99 --- /dev/null +++ b/arch/powerpc/platforms/8xx/cpm1-ic.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Interrupt controller for the + * Communication Processor Module. + * Copyright (c) 1997 Dan error_act (dmalek@jlc.net) + */ +#include +#include +#include +#include +#include + +struct cpm_pic_data { + cpic8xx_t __iomem *reg; + struct irq_domain *host; +}; + +static void cpm_mask_irq(struct irq_data *d) +{ + struct cpm_pic_data *data = irq_data_get_irq_chip_data(d); + unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d); + + clrbits32(&data->reg->cpic_cimr, (1 << cpm_vec)); +} + +static void cpm_unmask_irq(struct irq_data *d) +{ + struct cpm_pic_data *data = irq_data_get_irq_chip_data(d); + unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d); + + setbits32(&data->reg->cpic_cimr, (1 << cpm_vec)); +} + +static void cpm_end_irq(struct irq_data *d) +{ + struct cpm_pic_data *data = irq_data_get_irq_chip_data(d); + unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d); + + out_be32(&data->reg->cpic_cisr, (1 << cpm_vec)); +} + +static struct irq_chip cpm_pic = { + .name = "CPM PIC", + .irq_mask = cpm_mask_irq, + .irq_unmask = cpm_unmask_irq, + .irq_eoi = cpm_end_irq, +}; + +static int cpm_get_irq(struct irq_desc *desc) +{ + struct cpm_pic_data *data = irq_desc_get_handler_data(desc); + int cpm_vec; + + /* + * Get the vector by setting the ACK bit and then reading + * the register. + */ + out_be16(&data->reg->cpic_civr, 1); + cpm_vec = in_be16(&data->reg->cpic_civr); + cpm_vec >>= 11; + + return irq_linear_revmap(data->host, cpm_vec); +} + +static void cpm_cascade(struct irq_desc *desc) +{ + generic_handle_irq(cpm_get_irq(desc)); +} + +static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_data(virq, h->host_data); + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq); + return 0; +} + +static const struct irq_domain_ops cpm_pic_host_ops = { + .map = cpm_pic_host_map, +}; + +static int cpm_pic_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + int irq; + struct cpm_pic_data *data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->reg = devm_ioremap(dev, res->start, resource_size(res)); + if (!data->reg) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* Initialize the CPM interrupt controller. */ + out_be32(&data->reg->cpic_cicr, + (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) | + ((virq_to_hw(irq) / 2) << 13) | CICR_HP_MASK); + + out_be32(&data->reg->cpic_cimr, 0); + + data->host = irq_domain_add_linear(dev->of_node, 64, &cpm_pic_host_ops, data); + if (!data->host) + return -ENODEV; + + irq_set_handler_data(irq, data); + irq_set_chained_handler(irq, cpm_cascade); + + setbits32(&data->reg->cpic_cicr, CICR_IEN); + + return 0; +} + +static const struct of_device_id cpm_pic_match[] = { + { + .compatible = "fsl,cpm1-pic", + }, { + .type = "cpm-pic", + .compatible = "CPM", + }, {}, +}; + +static struct platform_driver cpm_pic_driver = { + .driver = { + .name = "cpm-pic", + .of_match_table = cpm_pic_match, + }, + .probe = cpm_pic_probe, +}; + +static int __init cpm_pic_init(void) +{ + return platform_driver_register(&cpm_pic_driver); +} +arch_initcall(cpm_pic_init); + +/* + * The CPM can generate the error interrupt when there is a race condition + * between generating and masking interrupts. All we have to do is ACK it + * and return. This is a no-op function so we don't need any special + * tests in the interrupt handler. + */ +static irqreturn_t cpm_error_interrupt(int irq, void *dev) +{ + return IRQ_HANDLED; +} + +static int cpm_error_probe(struct platform_device *pdev) +{ + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + return request_irq(irq, cpm_error_interrupt, IRQF_NO_THREAD, "error", NULL); +} + +static const struct of_device_id cpm_error_ids[] = { + { .compatible = "fsl,cpm1" }, + { .type = "cpm" }, + {}, +}; + +static struct platform_driver cpm_error_driver = { + .driver = { + .name = "cpm-error", + .of_match_table = cpm_error_ids, + }, + .probe = cpm_error_probe, +}; + +static int __init cpm_error_init(void) +{ + return platform_driver_register(&cpm_error_driver); +} +subsys_initcall(cpm_error_init); -- cgit v1.2.3