From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/pasemi/msi.c | 162 ++++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100644 arch/powerpc/platforms/pasemi/msi.c (limited to 'arch/powerpc/platforms/pasemi/msi.c') diff --git a/arch/powerpc/platforms/pasemi/msi.c b/arch/powerpc/platforms/pasemi/msi.c new file mode 100644 index 000000000..166c97fff --- /dev/null +++ b/arch/powerpc/platforms/pasemi/msi.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2007, Olof Johansson, PA Semi + * + * Based on arch/powerpc/sysdev/mpic_u3msi.c: + * + * Copyright 2006, Segher Boessenkool, IBM Corporation. + * Copyright 2006-2007, Michael Ellerman, IBM Corporation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Allocate 16 interrupts per device, to give an alignment of 16, + * since that's the size of the grouping w.r.t. affinity. If someone + * needs more than 32 MSI's down the road we'll have to rethink this, + * but it should be OK for now. + */ +#define ALLOC_CHUNK 16 + +#define PASEMI_MSI_ADDR 0xfc080000 + +/* A bit ugly, can we get this from the pci_dev somehow? */ +static struct mpic *msi_mpic; + + +static void mpic_pasemi_msi_mask_irq(struct irq_data *data) +{ + pr_debug("mpic_pasemi_msi_mask_irq %d\n", data->irq); + pci_msi_mask_irq(data); + mpic_mask_irq(data); +} + +static void mpic_pasemi_msi_unmask_irq(struct irq_data *data) +{ + pr_debug("mpic_pasemi_msi_unmask_irq %d\n", data->irq); + mpic_unmask_irq(data); + pci_msi_unmask_irq(data); +} + +static struct irq_chip mpic_pasemi_msi_chip = { + .irq_shutdown = mpic_pasemi_msi_mask_irq, + .irq_mask = mpic_pasemi_msi_mask_irq, + .irq_unmask = mpic_pasemi_msi_unmask_irq, + .irq_eoi = mpic_end_irq, + .irq_set_type = mpic_set_irq_type, + .irq_set_affinity = mpic_set_affinity, + .name = "PASEMI-MSI", +}; + +static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev) +{ + struct msi_desc *entry; + irq_hw_number_t hwirq; + + pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev); + + msi_for_each_desc(entry, &pdev->dev, MSI_DESC_ASSOCIATED) { + hwirq = virq_to_hw(entry->irq); + irq_set_msi_desc(entry->irq, NULL); + irq_dispose_mapping(entry->irq); + entry->irq = 0; + msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, ALLOC_CHUNK); + } +} + +static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) +{ + unsigned int virq; + struct msi_desc *entry; + struct msi_msg msg; + int hwirq; + + if (type == PCI_CAP_ID_MSIX) + pr_debug("pasemi_msi: MSI-X untested, trying anyway\n"); + pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n", + pdev, nvec, type); + + msg.address_hi = 0; + msg.address_lo = PASEMI_MSI_ADDR; + + msi_for_each_desc(entry, &pdev->dev, MSI_DESC_NOTASSOCIATED) { + /* Allocate 16 interrupts for now, since that's the grouping for + * affinity. This can be changed later if it turns out 32 is too + * few MSIs for someone, but restrictions will apply to how the + * sources can be changed independently. + */ + hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, + ALLOC_CHUNK); + if (hwirq < 0) { + pr_debug("pasemi_msi: failed allocating hwirq\n"); + return hwirq; + } + + virq = irq_create_mapping(msi_mpic->irqhost, hwirq); + if (!virq) { + pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n", + hwirq); + msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, + ALLOC_CHUNK); + return -ENOSPC; + } + + /* Vector on MSI is really an offset, the hardware adds + * it to the value written at the magic address. So set + * it to 0 to remain sane. + */ + mpic_set_vector(virq, 0); + + irq_set_msi_desc(virq, entry); + irq_set_chip(virq, &mpic_pasemi_msi_chip); + irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING); + + pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%x) " \ + "addr 0x%x\n", virq, hwirq, msg.address_lo); + + /* Likewise, the device writes [0...511] into the target + * register to generate MSI [512...1023] + */ + msg.data = hwirq-0x200; + pci_write_msi_msg(virq, &msg); + } + + return 0; +} + +int __init mpic_pasemi_msi_init(struct mpic *mpic) +{ + int rc; + struct pci_controller *phb; + struct device_node *of_node; + + of_node = irq_domain_get_of_node(mpic->irqhost); + if (!of_node || + !of_device_is_compatible(of_node, + "pasemi,pwrficient-openpic")) + return -ENODEV; + + rc = mpic_msi_init_allocator(mpic); + if (rc) { + pr_debug("pasemi_msi: Error allocating bitmap!\n"); + return rc; + } + + pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n"); + + msi_mpic = mpic; + list_for_each_entry(phb, &hose_list, list_node) { + WARN_ON(phb->controller_ops.setup_msi_irqs); + phb->controller_ops.setup_msi_irqs = pasemi_msi_setup_msi_irqs; + phb->controller_ops.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs; + } + + return 0; +} -- cgit v1.2.3