From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/pasemi/setup.c | 455 ++++++++++++++++++++++++++++++++++ 1 file changed, 455 insertions(+) create mode 100644 arch/powerpc/platforms/pasemi/setup.c (limited to 'arch/powerpc/platforms/pasemi/setup.c') diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c new file mode 100644 index 000000000..2aef49e04 --- /dev/null +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -0,0 +1,455 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Authors: Kip Walker, PA Semi + * Olof Johansson, PA Semi + * + * Maintained by: Olof Johansson + * + * Based on arch/powerpc/platforms/maple/setup.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "pasemi.h" + +/* SDC reset register, must be pre-mapped at reset time */ +static void __iomem *reset_reg; + +/* Various error status registers, must be pre-mapped at MCE time */ + +#define MAX_MCE_REGS 32 +struct mce_regs { + char *name; + void __iomem *addr; +}; + +static struct mce_regs mce_regs[MAX_MCE_REGS]; +static int num_mce_regs; +static int nmi_virq = 0; + + +static void __noreturn pas_restart(char *cmd) +{ + /* Need to put others cpu in hold loop so they're not sleeping */ + smp_send_stop(); + udelay(10000); + printk("Restarting...\n"); + while (1) + out_le32(reset_reg, 0x6000000); +} + +#ifdef CONFIG_PPC_PASEMI_NEMO +void pas_shutdown(void) +{ + /* Set the PLD bit that makes the SB600 think the power button is being pressed */ + void __iomem *pld_map = ioremap(0xf5000000,4096); + while (1) + out_8(pld_map+7,0x01); +} + +/* RTC platform device structure as is not in device tree */ +static struct resource rtc_resource[] = {{ + .name = "rtc", + .start = 0x70, + .end = 0x71, + .flags = IORESOURCE_IO, +}, { + .name = "rtc", + .start = 8, + .end = 8, + .flags = IORESOURCE_IRQ, +}}; + +static inline void nemo_init_rtc(void) +{ + platform_device_register_simple("rtc_cmos", -1, rtc_resource, 2); +} + +#else + +static inline void nemo_init_rtc(void) +{ +} +#endif + +#ifdef CONFIG_SMP +static arch_spinlock_t timebase_lock; +static unsigned long timebase; + +static void pas_give_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + hard_irq_disable(); + arch_spin_lock(&timebase_lock); + mtspr(SPRN_TBCTL, TBCTL_FREEZE); + isync(); + timebase = get_tb(); + arch_spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + mtspr(SPRN_TBCTL, TBCTL_RESTART); + local_irq_restore(flags); +} + +static void pas_take_timebase(void) +{ + while (!timebase) + smp_rmb(); + + arch_spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + arch_spin_unlock(&timebase_lock); +} + +static struct smp_ops_t pas_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .kick_cpu = smp_generic_kick_cpu, + .setup_cpu = smp_mpic_setup_cpu, + .give_timebase = pas_give_timebase, + .take_timebase = pas_take_timebase, +}; +#endif /* CONFIG_SMP */ + +static void __init pas_setup_arch(void) +{ +#ifdef CONFIG_SMP + /* Setup SMP callback */ + smp_ops = &pas_smp_ops; +#endif + + /* Remap SDC register for doing reset */ + /* XXXOJN This should maybe come out of the device tree */ + reset_reg = ioremap(0xfc101100, 4); +} + +static int __init pas_setup_mce_regs(void) +{ + struct pci_dev *dev; + int reg; + + /* Remap various SoC status registers for use by the MCE handler */ + + reg = 0; + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL); + while (dev && reg < MAX_MCE_REGS) { + mce_regs[reg].name = kasprintf(GFP_KERNEL, + "mc%d_mcdebug_errsta", reg); + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730); + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev); + reg++; + } + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); + if (dev && reg+4 < MAX_MCE_REGS) { + mce_regs[reg].name = "iobdbg_IntStatus1"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438); + reg++; + mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454); + reg++; + mce_regs[reg].name = "iobiom_IntStatus"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10); + reg++; + mce_regs[reg].name = "iobiom_IntDbgReg"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c); + reg++; + } + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL); + if (dev && reg+2 < MAX_MCE_REGS) { + mce_regs[reg].name = "l2csts_IntStatus"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200); + reg++; + mce_regs[reg].name = "l2csts_Cnt"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214); + reg++; + } + + num_mce_regs = reg; + + return 0; +} +machine_device_initcall(pasemi, pas_setup_mce_regs); + +#ifdef CONFIG_PPC_PASEMI_NEMO +static void sb600_8259_cascade(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +static void __init nemo_init_IRQ(struct mpic *mpic) +{ + struct device_node *np; + int gpio_virq; + /* Connect the SB600's legacy i8259 controller */ + np = of_find_node_by_path("/pxp@0,e0000000"); + i8259_init(np, 0); + of_node_put(np); + + gpio_virq = irq_create_mapping(NULL, 3); + irq_set_irq_type(gpio_virq, IRQ_TYPE_LEVEL_HIGH); + irq_set_chained_handler(gpio_virq, sb600_8259_cascade); + mpic_unmask_irq(irq_get_irq_data(gpio_virq)); + + irq_set_default_host(mpic->irqhost); +} + +#else + +static inline void nemo_init_IRQ(struct mpic *mpic) +{ +} +#endif + +static __init void pas_init_IRQ(void) +{ + struct device_node *np; + struct device_node *root, *mpic_node; + unsigned long openpic_addr; + const unsigned int *opprop; + int naddr, opplen; + int mpic_flags; + const unsigned int *nmiprop; + struct mpic *mpic; + + mpic_node = NULL; + + for_each_node_by_type(np, "interrupt-controller") + if (of_device_is_compatible(np, "open-pic")) { + mpic_node = np; + break; + } + if (!mpic_node) + for_each_node_by_type(np, "open-pic") { + mpic_node = np; + break; + } + if (!mpic_node) { + pr_err("Failed to locate the MPIC interrupt controller\n"); + return; + } + + /* Find address list in /platform-open-pic */ + root = of_find_node_by_path("/"); + naddr = of_n_addr_cells(root); + opprop = of_get_property(root, "platform-open-pic", &opplen); + if (!opprop) { + pr_err("No platform-open-pic property.\n"); + of_node_put(root); + return; + } + openpic_addr = of_read_number(opprop, naddr); + pr_debug("OpenPIC addr: %lx\n", openpic_addr); + + mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET; + + nmiprop = of_get_property(mpic_node, "nmi-source", NULL); + if (nmiprop) + mpic_flags |= MPIC_ENABLE_MCK; + + mpic = mpic_alloc(mpic_node, openpic_addr, + mpic_flags, 0, 0, "PASEMI-OPIC"); + BUG_ON(!mpic); + + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000); + mpic_init(mpic); + /* The NMI/MCK source needs to be prio 15 */ + if (nmiprop) { + nmi_virq = irq_create_mapping(NULL, *nmiprop); + mpic_irq_set_priority(nmi_virq, 15); + irq_set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING); + mpic_unmask_irq(irq_get_irq_data(nmi_virq)); + } + + nemo_init_IRQ(mpic); + + of_node_put(mpic_node); + of_node_put(root); +} + +static void __init pas_progress(char *s, unsigned short hex) +{ + printk("[%04x] : %s\n", hex, s ? s : ""); +} + + +static int pas_machine_check_handler(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + unsigned long srr0, srr1, dsisr; + int dump_slb = 0; + int i; + + srr0 = regs->nip; + srr1 = regs->msr; + + if (nmi_virq && mpic_get_mcirq() == nmi_virq) { + pr_err("NMI delivered\n"); + debugger(regs); + mpic_end_irq(irq_get_irq_data(nmi_virq)); + goto out; + } + + dsisr = mfspr(SPRN_DSISR); + pr_err("Machine Check on CPU %d\n", cpu); + pr_err("SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); + pr_err("DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); + pr_err("BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER), + mfspr(SPRN_PA6T_MER)); + pr_err("IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER), + mfspr(SPRN_PA6T_DER)); + pr_err("Cause:\n"); + + if (srr1 & 0x200000) + pr_err("Signalled by SDC\n"); + + if (srr1 & 0x100000) { + pr_err("Load/Store detected error:\n"); + if (dsisr & 0x8000) + pr_err("D-cache ECC double-bit error or bus error\n"); + if (dsisr & 0x4000) + pr_err("LSU snoop response error\n"); + if (dsisr & 0x2000) { + pr_err("MMU SLB multi-hit or invalid B field\n"); + dump_slb = 1; + } + if (dsisr & 0x1000) + pr_err("Recoverable Duptags\n"); + if (dsisr & 0x800) + pr_err("Recoverable D-cache parity error count overflow\n"); + if (dsisr & 0x400) + pr_err("TLB parity error count overflow\n"); + } + + if (srr1 & 0x80000) + pr_err("Bus Error\n"); + + if (srr1 & 0x40000) { + pr_err("I-side SLB multiple hit\n"); + dump_slb = 1; + } + + if (srr1 & 0x20000) + pr_err("I-cache parity error hit\n"); + + if (num_mce_regs == 0) + pr_err("No MCE registers mapped yet, can't dump\n"); + else + pr_err("SoC debug registers:\n"); + + for (i = 0; i < num_mce_regs; i++) + pr_err("%s: 0x%08x\n", mce_regs[i].name, + in_le32(mce_regs[i].addr)); + + if (dump_slb) { + unsigned long e, v; + int i; + + pr_err("slb contents:\n"); + for (i = 0; i < mmu_slb_size; i++) { + asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i)); + asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i)); + pr_err("%02d %016lx %016lx\n", i, e, v); + } + } + +out: + /* SRR1[62] is from MSR[62] if recoverable, so pass that back */ + return !!(srr1 & 0x2); +} + +static const struct of_device_id pasemi_bus_ids[] = { + /* Unfortunately needed for legacy firmwares */ + { .type = "localbus", }, + { .type = "sdc", }, + /* These are the proper entries, which newer firmware uses */ + { .compatible = "pasemi,localbus", }, + { .compatible = "pasemi,sdc", }, + {}, +}; + +static int __init pasemi_publish_devices(void) +{ + /* Publish OF platform devices for SDC and other non-PCI devices */ + of_platform_bus_probe(NULL, pasemi_bus_ids, NULL); + + nemo_init_rtc(); + + return 0; +} +machine_device_initcall(pasemi, pasemi_publish_devices); + + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init pas_probe(void) +{ + if (!of_machine_is_compatible("PA6T-1682M") && + !of_machine_is_compatible("pasemi,pwrficient")) + return 0; + +#ifdef CONFIG_PPC_PASEMI_NEMO + /* + * Check for the Nemo motherboard here, if we are running on one + * change the machine definition to fit + */ + if (of_machine_is_compatible("pasemi,nemo")) { + pm_power_off = pas_shutdown; + ppc_md.name = "A-EON Amigaone X1000"; + } +#endif + + iommu_init_early_pasemi(); + + return 1; +} + +define_machine(pasemi) { + .name = "PA Semi PWRficient", + .probe = pas_probe, + .setup_arch = pas_setup_arch, + .discover_phbs = pas_pci_init, + .init_IRQ = pas_init_IRQ, + .get_irq = mpic_get_irq, + .restart = pas_restart, + .get_boot_time = pas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .progress = pas_progress, + .machine_check_exception = pas_machine_check_handler, +}; -- cgit v1.2.3