From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/powermac/udbg_scc.c | 184 +++++++++++++++++++++++++++++ 1 file changed, 184 insertions(+) create mode 100644 arch/powerpc/platforms/powermac/udbg_scc.c (limited to 'arch/powerpc/platforms/powermac/udbg_scc.c') diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c new file mode 100644 index 000000000..1b7c39e84 --- /dev/null +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * udbg for zilog scc ports as found on Apple PowerMacs + * + * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp + */ +#include +#include +#include +#include +#include +#include + +extern u8 real_readb(volatile u8 __iomem *addr); +extern void real_writeb(u8 data, volatile u8 __iomem *addr); + +#define SCC_TXRDY 4 +#define SCC_RXRDY 1 + +static volatile u8 __iomem *sccc; +static volatile u8 __iomem *sccd; + +static void udbg_scc_putc(char c) +{ + if (sccc) { + while ((in_8(sccc) & SCC_TXRDY) == 0) + ; + out_8(sccd, c); + if (c == '\n') + udbg_scc_putc('\r'); + } +} + +static int udbg_scc_getc_poll(void) +{ + if (sccc) { + if ((in_8(sccc) & SCC_RXRDY) != 0) + return in_8(sccd); + else + return -1; + } + return -1; +} + +static int udbg_scc_getc(void) +{ + if (sccc) { + while ((in_8(sccc) & SCC_RXRDY) == 0) + ; + return in_8(sccd); + } + return -1; +} + +static unsigned char scc_inittab[] = { + 13, 0, /* set baud rate divisor */ + 12, 0, + 14, 1, /* baud rate gen enable, src=rtxc */ + 11, 0x50, /* clocks = br gen */ + 5, 0xea, /* tx 8 bits, assert DTR & RTS */ + 4, 0x46, /* x16 clock, 1 stop */ + 3, 0xc1, /* rx enable, 8 bits */ +}; + +void __init udbg_scc_init(int force_scc) +{ + const u32 *reg; + unsigned long addr; + struct device_node *stdout = NULL, *escc = NULL, *macio = NULL; + struct device_node *ch, *ch_def = NULL, *ch_a = NULL; + const char *path; + int i; + + escc = of_find_node_by_name(NULL, "escc"); + if (escc == NULL) + goto bail; + macio = of_get_parent(escc); + if (macio == NULL) + goto bail; + path = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (path != NULL) + stdout = of_find_node_by_path(path); + for_each_child_of_node(escc, ch) { + if (ch == stdout) { + of_node_put(ch_def); + ch_def = of_node_get(ch); + } + if (of_node_name_eq(ch, "ch-a")) { + of_node_put(ch_a); + ch_a = of_node_get(ch); + } + } + if (ch_def == NULL && !force_scc) + goto bail; + + ch = ch_def ? ch_def : ch_a; + + /* Get address within mac-io ASIC */ + reg = of_get_property(escc, "reg", NULL); + if (reg == NULL) + goto bail; + addr = reg[0]; + + /* Get address of mac-io PCI itself */ + reg = of_get_property(macio, "assigned-addresses", NULL); + if (reg == NULL) + goto bail; + addr += reg[2]; + + /* Lock the serial port */ + pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch, + PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1); + + if (ch == ch_a) + addr += 0x20; + sccc = ioremap(addr & PAGE_MASK, PAGE_SIZE) ; + sccc += addr & ~PAGE_MASK; + sccd = sccc + 0x10; + + mb(); + + for (i = 20000; i != 0; --i) + in_8(sccc); + out_8(sccc, 0x09); /* reset A or B side */ + out_8(sccc, 0xc0); + + /* If SCC was the OF output port, read the BRG value, else + * Setup for 38400 or 57600 8N1 depending on the machine + */ + if (ch_def != NULL) { + out_8(sccc, 13); + scc_inittab[1] = in_8(sccc); + out_8(sccc, 12); + scc_inittab[3] = in_8(sccc); + } else if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) { + /* Xserves and G5s default to 57600 */ + scc_inittab[1] = 0; + scc_inittab[3] = 0; + } else { + /* Others default to 38400 */ + scc_inittab[1] = 0; + scc_inittab[3] = 1; + } + + for (i = 0; i < sizeof(scc_inittab); ++i) + out_8(sccc, scc_inittab[i]); + + + udbg_putc = udbg_scc_putc; + udbg_getc = udbg_scc_getc; + udbg_getc_poll = udbg_scc_getc_poll; + + udbg_puts("Hello World !\n"); + + bail: + of_node_put(macio); + of_node_put(escc); + of_node_put(stdout); + of_node_put(ch_def); + of_node_put(ch_a); +} + +#ifdef CONFIG_PPC64 +static void udbg_real_scc_putc(char c) +{ + while ((real_readb(sccc) & SCC_TXRDY) == 0) + ; + real_writeb(c, sccd); + if (c == '\n') + udbg_real_scc_putc('\r'); +} + +void __init udbg_init_pmac_realmode(void) +{ + sccc = (volatile u8 __iomem *)0x80013020ul; + sccd = (volatile u8 __iomem *)0x80013030ul; + + udbg_putc = udbg_real_scc_putc; + udbg_getc = NULL; + udbg_getc_poll = NULL; +} +#endif /* CONFIG_PPC64 */ -- cgit v1.2.3