From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/powernv/opal-hmi.c | 381 ++++++++++++++++++++++++++++++ 1 file changed, 381 insertions(+) create mode 100644 arch/powerpc/platforms/powernv/opal-hmi.c (limited to 'arch/powerpc/platforms/powernv/opal-hmi.c') diff --git a/arch/powerpc/platforms/powernv/opal-hmi.c b/arch/powerpc/platforms/powernv/opal-hmi.c new file mode 100644 index 000000000..f0c1830de --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-hmi.c @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * OPAL hypervisor Maintenance interrupt handling support in PowerNV. + * + * Copyright 2014 IBM Corporation + * Author: Mahesh Salgaonkar + */ + +#undef DEBUG + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "powernv.h" + +static int opal_hmi_handler_nb_init; +struct OpalHmiEvtNode { + struct list_head list; + struct OpalHMIEvent hmi_evt; +}; + +struct xstop_reason { + uint32_t xstop_reason; + const char *unit_failed; + const char *description; +}; + +static LIST_HEAD(opal_hmi_evt_list); +static DEFINE_SPINLOCK(opal_hmi_evt_lock); + +static void print_core_checkstop_reason(const char *level, + struct OpalHMIEvent *hmi_evt) +{ + int i; + static const struct xstop_reason xstop_reason[] = { + { CORE_CHECKSTOP_IFU_REGFILE, "IFU", + "RegFile core check stop" }, + { CORE_CHECKSTOP_IFU_LOGIC, "IFU", "Logic core check stop" }, + { CORE_CHECKSTOP_PC_DURING_RECOV, "PC", + "Core checkstop during recovery" }, + { CORE_CHECKSTOP_ISU_REGFILE, "ISU", + "RegFile core check stop (mapper error)" }, + { CORE_CHECKSTOP_ISU_LOGIC, "ISU", "Logic core check stop" }, + { CORE_CHECKSTOP_FXU_LOGIC, "FXU", "Logic core check stop" }, + { CORE_CHECKSTOP_VSU_LOGIC, "VSU", "Logic core check stop" }, + { CORE_CHECKSTOP_PC_RECOV_IN_MAINT_MODE, "PC", + "Recovery in maintenance mode" }, + { CORE_CHECKSTOP_LSU_REGFILE, "LSU", + "RegFile core check stop" }, + { CORE_CHECKSTOP_PC_FWD_PROGRESS, "PC", + "Forward Progress Error" }, + { CORE_CHECKSTOP_LSU_LOGIC, "LSU", "Logic core check stop" }, + { CORE_CHECKSTOP_PC_LOGIC, "PC", "Logic core check stop" }, + { CORE_CHECKSTOP_PC_HYP_RESOURCE, "PC", + "Hypervisor Resource error - core check stop" }, + { CORE_CHECKSTOP_PC_HANG_RECOV_FAILED, "PC", + "Hang Recovery Failed (core check stop)" }, + { CORE_CHECKSTOP_PC_AMBI_HANG_DETECTED, "PC", + "Ambiguous Hang Detected (unknown source)" }, + { CORE_CHECKSTOP_PC_DEBUG_TRIG_ERR_INJ, "PC", + "Debug Trigger Error inject" }, + { CORE_CHECKSTOP_PC_SPRD_HYP_ERR_INJ, "PC", + "Hypervisor check stop via SPRC/SPRD" }, + }; + + /* Validity check */ + if (!hmi_evt->u.xstop_error.xstop_reason) { + printk("%s Unknown Core check stop.\n", level); + return; + } + + printk("%s CPU PIR: %08x\n", level, + be32_to_cpu(hmi_evt->u.xstop_error.u.pir)); + for (i = 0; i < ARRAY_SIZE(xstop_reason); i++) + if (be32_to_cpu(hmi_evt->u.xstop_error.xstop_reason) & + xstop_reason[i].xstop_reason) + printk("%s [Unit: %-3s] %s\n", level, + xstop_reason[i].unit_failed, + xstop_reason[i].description); +} + +static void print_nx_checkstop_reason(const char *level, + struct OpalHMIEvent *hmi_evt) +{ + int i; + static const struct xstop_reason xstop_reason[] = { + { NX_CHECKSTOP_SHM_INVAL_STATE_ERR, "DMA & Engine", + "SHM invalid state error" }, + { NX_CHECKSTOP_DMA_INVAL_STATE_ERR_1, "DMA & Engine", + "DMA invalid state error bit 15" }, + { NX_CHECKSTOP_DMA_INVAL_STATE_ERR_2, "DMA & Engine", + "DMA invalid state error bit 16" }, + { NX_CHECKSTOP_DMA_CH0_INVAL_STATE_ERR, "DMA & Engine", + "Channel 0 invalid state error" }, + { NX_CHECKSTOP_DMA_CH1_INVAL_STATE_ERR, "DMA & Engine", + "Channel 1 invalid state error" }, + { NX_CHECKSTOP_DMA_CH2_INVAL_STATE_ERR, "DMA & Engine", + "Channel 2 invalid state error" }, + { NX_CHECKSTOP_DMA_CH3_INVAL_STATE_ERR, "DMA & Engine", + "Channel 3 invalid state error" }, + { NX_CHECKSTOP_DMA_CH4_INVAL_STATE_ERR, "DMA & Engine", + "Channel 4 invalid state error" }, + { NX_CHECKSTOP_DMA_CH5_INVAL_STATE_ERR, "DMA & Engine", + "Channel 5 invalid state error" }, + { NX_CHECKSTOP_DMA_CH6_INVAL_STATE_ERR, "DMA & Engine", + "Channel 6 invalid state error" }, + { NX_CHECKSTOP_DMA_CH7_INVAL_STATE_ERR, "DMA & Engine", + "Channel 7 invalid state error" }, + { NX_CHECKSTOP_DMA_CRB_UE, "DMA & Engine", + "UE error on CRB(CSB address, CCB)" }, + { NX_CHECKSTOP_DMA_CRB_SUE, "DMA & Engine", + "SUE error on CRB(CSB address, CCB)" }, + { NX_CHECKSTOP_PBI_ISN_UE, "PowerBus Interface", + "CRB Kill ISN received while holding ISN with UE error" }, + }; + + /* Validity check */ + if (!hmi_evt->u.xstop_error.xstop_reason) { + printk("%s Unknown NX check stop.\n", level); + return; + } + + printk("%s NX checkstop on CHIP ID: %x\n", level, + be32_to_cpu(hmi_evt->u.xstop_error.u.chip_id)); + for (i = 0; i < ARRAY_SIZE(xstop_reason); i++) + if (be32_to_cpu(hmi_evt->u.xstop_error.xstop_reason) & + xstop_reason[i].xstop_reason) + printk("%s [Unit: %-3s] %s\n", level, + xstop_reason[i].unit_failed, + xstop_reason[i].description); +} + +static void print_npu_checkstop_reason(const char *level, + struct OpalHMIEvent *hmi_evt) +{ + uint8_t reason, reason_count, i; + + /* + * We may not have a checkstop reason on some combination of + * hardware and/or skiboot version + */ + if (!hmi_evt->u.xstop_error.xstop_reason) { + printk("%s NPU checkstop on chip %x\n", level, + be32_to_cpu(hmi_evt->u.xstop_error.u.chip_id)); + return; + } + + /* + * NPU2 has 3 FIRs. Reason encoded on a byte as: + * 2 bits for the FIR number + * 6 bits for the bit number + * It may be possible to find several reasons. + * + * We don't display a specific message per FIR bit as there + * are too many and most are meaningless without the workbook + * and/or hw team help anyway. + */ + reason_count = sizeof(hmi_evt->u.xstop_error.xstop_reason) / + sizeof(reason); + for (i = 0; i < reason_count; i++) { + reason = (hmi_evt->u.xstop_error.xstop_reason >> (8 * i)) & 0xFF; + if (reason) + printk("%s NPU checkstop on chip %x: FIR%d bit %d is set\n", + level, + be32_to_cpu(hmi_evt->u.xstop_error.u.chip_id), + reason >> 6, reason & 0x3F); + } +} + +static void print_checkstop_reason(const char *level, + struct OpalHMIEvent *hmi_evt) +{ + uint8_t type = hmi_evt->u.xstop_error.xstop_type; + switch (type) { + case CHECKSTOP_TYPE_CORE: + print_core_checkstop_reason(level, hmi_evt); + break; + case CHECKSTOP_TYPE_NX: + print_nx_checkstop_reason(level, hmi_evt); + break; + case CHECKSTOP_TYPE_NPU: + print_npu_checkstop_reason(level, hmi_evt); + break; + default: + printk("%s Unknown Malfunction Alert of type %d\n", + level, type); + break; + } +} + +static void print_hmi_event_info(struct OpalHMIEvent *hmi_evt) +{ + const char *level, *sevstr, *error_info; + static const char *hmi_error_types[] = { + "Malfunction Alert", + "Processor Recovery done", + "Processor recovery occurred again", + "Processor recovery occurred for masked error", + "Timer facility experienced an error", + "TFMR SPR is corrupted", + "UPS (Uninterrupted Power System) Overflow indication", + "An XSCOM operation failure", + "An XSCOM operation completed", + "SCOM has set a reserved FIR bit to cause recovery", + "Debug trigger has set a reserved FIR bit to cause recovery", + "A hypervisor resource error occurred", + "CAPP recovery process is in progress", + }; + static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, + DEFAULT_RATELIMIT_BURST); + + /* Print things out */ + if (hmi_evt->version < OpalHMIEvt_V1) { + pr_err("HMI Interrupt, Unknown event version %d !\n", + hmi_evt->version); + return; + } + switch (hmi_evt->severity) { + case OpalHMI_SEV_NO_ERROR: + level = KERN_INFO; + sevstr = "Harmless"; + break; + case OpalHMI_SEV_WARNING: + level = KERN_WARNING; + sevstr = ""; + break; + case OpalHMI_SEV_ERROR_SYNC: + level = KERN_ERR; + sevstr = "Severe"; + break; + case OpalHMI_SEV_FATAL: + default: + level = KERN_ERR; + sevstr = "Fatal"; + break; + } + + if (hmi_evt->severity != OpalHMI_SEV_NO_ERROR || __ratelimit(&rs)) { + printk("%s%s Hypervisor Maintenance interrupt [%s]\n", + level, sevstr, + hmi_evt->disposition == OpalHMI_DISPOSITION_RECOVERED ? + "Recovered" : "Not recovered"); + error_info = hmi_evt->type < ARRAY_SIZE(hmi_error_types) ? + hmi_error_types[hmi_evt->type] + : "Unknown"; + printk("%s Error detail: %s\n", level, error_info); + printk("%s HMER: %016llx\n", level, + be64_to_cpu(hmi_evt->hmer)); + if ((hmi_evt->type == OpalHMI_ERROR_TFAC) || + (hmi_evt->type == OpalHMI_ERROR_TFMR_PARITY)) + printk("%s TFMR: %016llx\n", level, + be64_to_cpu(hmi_evt->tfmr)); + } + + if (hmi_evt->version < OpalHMIEvt_V2) + return; + + /* OpalHMIEvt_V2 and above provides reason for malfunction alert. */ + if (hmi_evt->type == OpalHMI_ERROR_MALFUNC_ALERT) + print_checkstop_reason(level, hmi_evt); +} + +static void hmi_event_handler(struct work_struct *work) +{ + unsigned long flags; + struct OpalHMIEvent *hmi_evt; + struct OpalHmiEvtNode *msg_node; + uint8_t disposition; + struct opal_msg msg; + int unrecoverable = 0; + + spin_lock_irqsave(&opal_hmi_evt_lock, flags); + while (!list_empty(&opal_hmi_evt_list)) { + msg_node = list_entry(opal_hmi_evt_list.next, + struct OpalHmiEvtNode, list); + list_del(&msg_node->list); + spin_unlock_irqrestore(&opal_hmi_evt_lock, flags); + + hmi_evt = (struct OpalHMIEvent *) &msg_node->hmi_evt; + print_hmi_event_info(hmi_evt); + disposition = hmi_evt->disposition; + kfree(msg_node); + + /* + * Check if HMI event has been recovered or not. If not + * then kernel can't continue, we need to panic. + * But before we do that, display all the HMI event + * available on the list and set unrecoverable flag to 1. + */ + if (disposition != OpalHMI_DISPOSITION_RECOVERED) + unrecoverable = 1; + + spin_lock_irqsave(&opal_hmi_evt_lock, flags); + } + spin_unlock_irqrestore(&opal_hmi_evt_lock, flags); + + if (unrecoverable) { + /* Pull all HMI events from OPAL before we panic. */ + while (opal_get_msg(__pa(&msg), sizeof(msg)) == OPAL_SUCCESS) { + u32 type; + + type = be32_to_cpu(msg.msg_type); + + /* skip if not HMI event */ + if (type != OPAL_MSG_HMI_EVT) + continue; + + /* HMI event info starts from param[0] */ + hmi_evt = (struct OpalHMIEvent *)&msg.params[0]; + print_hmi_event_info(hmi_evt); + } + + pnv_platform_error_reboot(NULL, "Unrecoverable HMI exception"); + } +} + +static DECLARE_WORK(hmi_event_work, hmi_event_handler); +/* + * opal_handle_hmi_event - notifier handler that queues up HMI events + * to be preocessed later. + */ +static int opal_handle_hmi_event(struct notifier_block *nb, + unsigned long msg_type, void *msg) +{ + unsigned long flags; + struct OpalHMIEvent *hmi_evt; + struct opal_msg *hmi_msg = msg; + struct OpalHmiEvtNode *msg_node; + + /* Sanity Checks */ + if (msg_type != OPAL_MSG_HMI_EVT) + return 0; + + /* HMI event info starts from param[0] */ + hmi_evt = (struct OpalHMIEvent *)&hmi_msg->params[0]; + + /* Delay the logging of HMI events to workqueue. */ + msg_node = kzalloc(sizeof(*msg_node), GFP_ATOMIC); + if (!msg_node) { + pr_err("HMI: out of memory, Opal message event not handled\n"); + return -ENOMEM; + } + memcpy(&msg_node->hmi_evt, hmi_evt, sizeof(*hmi_evt)); + + spin_lock_irqsave(&opal_hmi_evt_lock, flags); + list_add(&msg_node->list, &opal_hmi_evt_list); + spin_unlock_irqrestore(&opal_hmi_evt_lock, flags); + + schedule_work(&hmi_event_work); + return 0; +} + +static struct notifier_block opal_hmi_handler_nb = { + .notifier_call = opal_handle_hmi_event, + .next = NULL, + .priority = 0, +}; + +int __init opal_hmi_handler_init(void) +{ + int ret; + + if (!opal_hmi_handler_nb_init) { + ret = opal_message_notifier_register( + OPAL_MSG_HMI_EVT, &opal_hmi_handler_nb); + if (ret) { + pr_err("%s: Can't register OPAL event notifier (%d)\n", + __func__, ret); + return ret; + } + opal_hmi_handler_nb_init = 1; + } + return 0; +} -- cgit v1.2.3