From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/platforms/powernv/opal-irqchip.c | 310 ++++++++++++++++++++++++++ 1 file changed, 310 insertions(+) create mode 100644 arch/powerpc/platforms/powernv/opal-irqchip.c (limited to 'arch/powerpc/platforms/powernv/opal-irqchip.c') diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c new file mode 100644 index 000000000..d55652b5f --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-irqchip.c @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * This file implements an irqchip for OPAL events. Whenever there is + * an interrupt that is handled by OPAL we get passed a list of events + * that Linux needs to do something about. These basically look like + * interrupts to Linux so we implement an irqchip to handle them. + * + * Copyright Alistair Popple, IBM Corporation 2014. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "powernv.h" + +/* Maximum number of events supported by OPAL firmware */ +#define MAX_NUM_EVENTS 64 + +struct opal_event_irqchip { + struct irq_chip irqchip; + struct irq_domain *domain; + unsigned long mask; +}; +static struct opal_event_irqchip opal_event_irqchip; +static u64 last_outstanding_events; +static int opal_irq_count; +static struct resource *opal_irqs; + +void opal_handle_events(void) +{ + __be64 events = 0; + u64 e; + + e = READ_ONCE(last_outstanding_events) & opal_event_irqchip.mask; +again: + while (e) { + int hwirq; + + hwirq = fls64(e) - 1; + e &= ~BIT_ULL(hwirq); + + local_irq_disable(); + irq_enter(); + generic_handle_domain_irq(opal_event_irqchip.domain, hwirq); + irq_exit(); + local_irq_enable(); + + cond_resched(); + } + last_outstanding_events = 0; + if (opal_poll_events(&events) != OPAL_SUCCESS) + return; + e = be64_to_cpu(events) & opal_event_irqchip.mask; + if (e) + goto again; +} + +bool opal_have_pending_events(void) +{ + if (last_outstanding_events & opal_event_irqchip.mask) + return true; + return false; +} + +static void opal_event_mask(struct irq_data *d) +{ + clear_bit(d->hwirq, &opal_event_irqchip.mask); +} + +static void opal_event_unmask(struct irq_data *d) +{ + set_bit(d->hwirq, &opal_event_irqchip.mask); + if (opal_have_pending_events()) + opal_wake_poller(); +} + +static int opal_event_set_type(struct irq_data *d, unsigned int flow_type) +{ + /* + * For now we only support level triggered events. The irq + * handler will be called continuously until the event has + * been cleared in OPAL. + */ + if (flow_type != IRQ_TYPE_LEVEL_HIGH) + return -EINVAL; + + return 0; +} + +static struct opal_event_irqchip opal_event_irqchip = { + .irqchip = { + .name = "OPAL EVT", + .irq_mask = opal_event_mask, + .irq_unmask = opal_event_unmask, + .irq_set_type = opal_event_set_type, + }, + .mask = 0, +}; + +static int opal_event_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, &opal_event_irqchip); + irq_set_chip_and_handler(irq, &opal_event_irqchip.irqchip, + handle_level_irq); + + return 0; +} + +static irqreturn_t opal_interrupt(int irq, void *data) +{ + __be64 events; + + opal_handle_interrupt(virq_to_hw(irq), &events); + last_outstanding_events = be64_to_cpu(events); + if (opal_have_pending_events()) + opal_wake_poller(); + + return IRQ_HANDLED; +} + +static int opal_event_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) +{ + return irq_domain_get_of_node(h) == node; +} + +static int opal_event_xlate(struct irq_domain *h, struct device_node *np, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + *out_hwirq = intspec[0]; + *out_flags = IRQ_TYPE_LEVEL_HIGH; + + return 0; +} + +static const struct irq_domain_ops opal_event_domain_ops = { + .match = opal_event_match, + .map = opal_event_map, + .xlate = opal_event_xlate, +}; + +void opal_event_shutdown(void) +{ + unsigned int i; + + /* First free interrupts, which will also mask them */ + for (i = 0; i < opal_irq_count; i++) { + if (!opal_irqs || !opal_irqs[i].start) + continue; + + if (in_interrupt() || irqs_disabled()) + disable_irq_nosync(opal_irqs[i].start); + else + free_irq(opal_irqs[i].start, NULL); + + opal_irqs[i].start = 0; + } +} + +int __init opal_event_init(void) +{ + struct device_node *dn, *opal_node; + bool old_style = false; + int i, rc = 0; + + opal_node = of_find_node_by_path("/ibm,opal"); + if (!opal_node) { + pr_warn("opal: Node not found\n"); + return -ENODEV; + } + + /* If dn is NULL it means the domain won't be linked to a DT + * node so therefore irq_of_parse_and_map(...) wont work. But + * that shouldn't be problem because if we're running a + * version of skiboot that doesn't have the dn then the + * devices won't have the correct properties and will have to + * fall back to the legacy method (opal_event_request(...)) + * anyway. */ + dn = of_find_compatible_node(NULL, NULL, "ibm,opal-event"); + opal_event_irqchip.domain = irq_domain_add_linear(dn, MAX_NUM_EVENTS, + &opal_event_domain_ops, &opal_event_irqchip); + of_node_put(dn); + if (!opal_event_irqchip.domain) { + pr_warn("opal: Unable to create irq domain\n"); + rc = -ENOMEM; + goto out; + } + + /* Look for new-style (standard) "interrupts" property */ + opal_irq_count = of_irq_count(opal_node); + + /* Absent ? Look for the old one */ + if (opal_irq_count < 1) { + /* Get opal-interrupts property and names if present */ + rc = of_property_count_u32_elems(opal_node, "opal-interrupts"); + if (rc > 0) + opal_irq_count = rc; + old_style = true; + } + + /* No interrupts ? Bail out */ + if (!opal_irq_count) + goto out; + + pr_debug("OPAL: Found %d interrupts reserved for OPAL using %s scheme\n", + opal_irq_count, old_style ? "old" : "new"); + + /* Allocate an IRQ resources array */ + opal_irqs = kcalloc(opal_irq_count, sizeof(struct resource), GFP_KERNEL); + if (WARN_ON(!opal_irqs)) { + rc = -ENOMEM; + goto out; + } + + /* Build the resources array */ + if (old_style) { + /* Old style "opal-interrupts" property */ + for (i = 0; i < opal_irq_count; i++) { + struct resource *r = &opal_irqs[i]; + const char *name = NULL; + u32 hw_irq; + int virq; + + rc = of_property_read_u32_index(opal_node, "opal-interrupts", + i, &hw_irq); + if (WARN_ON(rc < 0)) { + opal_irq_count = i; + break; + } + of_property_read_string_index(opal_node, "opal-interrupts-names", + i, &name); + virq = irq_create_mapping(NULL, hw_irq); + if (!virq) { + pr_warn("Failed to map OPAL irq 0x%x\n", hw_irq); + continue; + } + r->start = r->end = virq; + r->flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW; + r->name = name; + } + } else { + /* new style standard "interrupts" property */ + rc = of_irq_to_resource_table(opal_node, opal_irqs, opal_irq_count); + if (WARN_ON(rc < 0)) { + opal_irq_count = 0; + kfree(opal_irqs); + goto out; + } + if (WARN_ON(rc < opal_irq_count)) + opal_irq_count = rc; + } + + /* Install interrupt handlers */ + for (i = 0; i < opal_irq_count; i++) { + struct resource *r = &opal_irqs[i]; + const char *name; + + /* Prefix name */ + if (r->name && strlen(r->name)) + name = kasprintf(GFP_KERNEL, "opal-%s", r->name); + else + name = kasprintf(GFP_KERNEL, "opal"); + + /* Install interrupt handler */ + rc = request_irq(r->start, opal_interrupt, r->flags & IRQD_TRIGGER_MASK, + name, NULL); + if (rc) { + pr_warn("Error %d requesting OPAL irq %d\n", rc, (int)r->start); + continue; + } + } + rc = 0; + out: + of_node_put(opal_node); + return rc; +} +machine_arch_initcall(powernv, opal_event_init); + +/** + * opal_event_request(unsigned int opal_event_nr) - Request an event + * @opal_event_nr: the opal event number to request + * + * This routine can be used to find the linux virq number which can + * then be passed to request_irq to assign a handler for a particular + * opal event. This should only be used by legacy devices which don't + * have proper device tree bindings. Most devices should use + * irq_of_parse_and_map() instead. + */ +int opal_event_request(unsigned int opal_event_nr) +{ + if (WARN_ON_ONCE(!opal_event_irqchip.domain)) + return 0; + + return irq_create_mapping(opal_event_irqchip.domain, opal_event_nr); +} +EXPORT_SYMBOL(opal_event_request); -- cgit v1.2.3