From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/sysdev/i8259.c | 283 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 283 insertions(+) create mode 100644 arch/powerpc/sysdev/i8259.c (limited to 'arch/powerpc/sysdev/i8259.c') diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c new file mode 100644 index 000000000..06e391485 --- /dev/null +++ b/arch/powerpc/sysdev/i8259.c @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * i8259 interrupt controller driver. + */ +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include + +static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */ + +static unsigned char cached_8259[2] = { 0xff, 0xff }; +#define cached_A1 (cached_8259[0]) +#define cached_21 (cached_8259[1]) + +static DEFINE_RAW_SPINLOCK(i8259_lock); + +static struct irq_domain *i8259_host; + +/* + * Acknowledge the IRQ using either the PCI host bridge's interrupt + * acknowledge feature or poll. How i8259_init() is called determines + * which is called. It should be noted that polling is broken on some + * IBM and Motorola PReP boxes so we must use the int-ack feature on them. + */ +unsigned int i8259_irq(void) +{ + int irq; + int lock = 0; + + /* Either int-ack or poll for the IRQ */ + if (pci_intack) + irq = readb(pci_intack); + else { + raw_spin_lock(&i8259_lock); + lock = 1; + + /* Perform an interrupt acknowledge cycle on controller 1. */ + outb(0x0C, 0x20); /* prepare for poll */ + irq = inb(0x20) & 7; + if (irq == 2 ) { + /* + * Interrupt is cascaded so perform interrupt + * acknowledge on controller 2. + */ + outb(0x0C, 0xA0); /* prepare for poll */ + irq = (inb(0xA0) & 7) + 8; + } + } + + if (irq == 7) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + if (!pci_intack) + outb(0x0B, 0x20); /* ISR register */ + if(~inb(0x20) & 0x80) + irq = 0; + } else if (irq == 0xff) + irq = 0; + + if (lock) + raw_spin_unlock(&i8259_lock); + return irq; +} + +static void i8259_mask_and_ack_irq(struct irq_data *d) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&i8259_lock, flags); + if (d->irq > 7) { + cached_A1 |= 1 << (d->irq-8); + inb(0xA1); /* DUMMY */ + outb(cached_A1, 0xA1); + outb(0x20, 0xA0); /* Non-specific EOI */ + outb(0x20, 0x20); /* Non-specific EOI to cascade */ + } else { + cached_21 |= 1 << d->irq; + inb(0x21); /* DUMMY */ + outb(cached_21, 0x21); + outb(0x20, 0x20); /* Non-specific EOI */ + } + raw_spin_unlock_irqrestore(&i8259_lock, flags); +} + +static void i8259_set_irq_mask(int irq_nr) +{ + outb(cached_A1,0xA1); + outb(cached_21,0x21); +} + +static void i8259_mask_irq(struct irq_data *d) +{ + unsigned long flags; + + pr_debug("i8259_mask_irq(%d)\n", d->irq); + + raw_spin_lock_irqsave(&i8259_lock, flags); + if (d->irq < 8) + cached_21 |= 1 << d->irq; + else + cached_A1 |= 1 << (d->irq-8); + i8259_set_irq_mask(d->irq); + raw_spin_unlock_irqrestore(&i8259_lock, flags); +} + +static void i8259_unmask_irq(struct irq_data *d) +{ + unsigned long flags; + + pr_debug("i8259_unmask_irq(%d)\n", d->irq); + + raw_spin_lock_irqsave(&i8259_lock, flags); + if (d->irq < 8) + cached_21 &= ~(1 << d->irq); + else + cached_A1 &= ~(1 << (d->irq-8)); + i8259_set_irq_mask(d->irq); + raw_spin_unlock_irqrestore(&i8259_lock, flags); +} + +static struct irq_chip i8259_pic = { + .name = "i8259", + .irq_mask = i8259_mask_irq, + .irq_disable = i8259_mask_irq, + .irq_unmask = i8259_unmask_irq, + .irq_mask_ack = i8259_mask_and_ack_irq, +}; + +static struct resource pic1_iores = { + .name = "8259 (master)", + .start = 0x20, + .end = 0x21, + .flags = IORESOURCE_IO | IORESOURCE_BUSY, +}; + +static struct resource pic2_iores = { + .name = "8259 (slave)", + .start = 0xa0, + .end = 0xa1, + .flags = IORESOURCE_IO | IORESOURCE_BUSY, +}; + +static struct resource pic_edgectrl_iores = { + .name = "8259 edge control", + .start = 0x4d0, + .end = 0x4d1, + .flags = IORESOURCE_IO | IORESOURCE_BUSY, +}; + +static int i8259_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) +{ + struct device_node *of_node = irq_domain_get_of_node(h); + return of_node == NULL || of_node == node; +} + +static int i8259_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw); + + /* We block the internal cascade */ + if (hw == 2) + irq_set_status_flags(virq, IRQ_NOREQUEST); + + /* We use the level handler only for now, we might want to + * be more cautious here but that works for now + */ + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &i8259_pic, handle_level_irq); + return 0; +} + +static int i8259_host_xlate(struct irq_domain *h, struct device_node *ct, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + static unsigned char map_isa_senses[4] = { + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_EDGE_RISING, + }; + + *out_hwirq = intspec[0]; + if (intsize > 1 && intspec[1] < 4) + *out_flags = map_isa_senses[intspec[1]]; + else + *out_flags = IRQ_TYPE_NONE; + + return 0; +} + +static const struct irq_domain_ops i8259_host_ops = { + .match = i8259_host_match, + .map = i8259_host_map, + .xlate = i8259_host_xlate, +}; + +struct irq_domain *__init i8259_get_host(void) +{ + return i8259_host; +} + +/** + * i8259_init - Initialize the legacy controller + * @node: device node of the legacy PIC (can be NULL, but then, it will match + * all interrupts, so beware) + * @intack_addr: PCI interrupt acknowledge (real) address which will return + * the active irq from the 8259 + */ +void i8259_init(struct device_node *node, unsigned long intack_addr) +{ + unsigned long flags; + + /* initialize the controller */ + raw_spin_lock_irqsave(&i8259_lock, flags); + + /* Mask all first */ + outb(0xff, 0xA1); + outb(0xff, 0x21); + + /* init master interrupt controller */ + outb(0x11, 0x20); /* Start init sequence */ + outb(0x00, 0x21); /* Vector base */ + outb(0x04, 0x21); /* edge triggered, Cascade (slave) on IRQ2 */ + outb(0x01, 0x21); /* Select 8086 mode */ + + /* init slave interrupt controller */ + outb(0x11, 0xA0); /* Start init sequence */ + outb(0x08, 0xA1); /* Vector base */ + outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */ + outb(0x01, 0xA1); /* Select 8086 mode */ + + /* That thing is slow */ + udelay(100); + + /* always read ISR */ + outb(0x0B, 0x20); + outb(0x0B, 0xA0); + + /* Unmask the internal cascade */ + cached_21 &= ~(1 << 2); + + /* Set interrupt masks */ + outb(cached_A1, 0xA1); + outb(cached_21, 0x21); + + raw_spin_unlock_irqrestore(&i8259_lock, flags); + + /* create a legacy host */ + i8259_host = irq_domain_add_legacy(node, NR_IRQS_LEGACY, 0, 0, + &i8259_host_ops, NULL); + if (i8259_host == NULL) { + printk(KERN_ERR "i8259: failed to allocate irq host !\n"); + return; + } + + /* reserve our resources */ + /* XXX should we continue doing that ? it seems to cause problems + * with further requesting of PCI IO resources for that range... + * need to look into it. + */ + request_resource(&ioport_resource, &pic1_iores); + request_resource(&ioport_resource, &pic2_iores); + request_resource(&ioport_resource, &pic_edgectrl_iores); + + if (intack_addr != 0) + pci_intack = ioremap(intack_addr, 1); + + printk(KERN_INFO "i8259 legacy interrupt controller initialized\n"); +} -- cgit v1.2.3