From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/powerpc/sysdev/xics/ics-native.c | 254 ++++++++++++++++++++++++++++++++++ 1 file changed, 254 insertions(+) create mode 100644 arch/powerpc/sysdev/xics/ics-native.c (limited to 'arch/powerpc/sysdev/xics/ics-native.c') diff --git a/arch/powerpc/sysdev/xics/ics-native.c b/arch/powerpc/sysdev/xics/ics-native.c new file mode 100644 index 000000000..112c8a1e8 --- /dev/null +++ b/arch/powerpc/sysdev/xics/ics-native.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ICS backend for OPAL managed interrupts. + * + * Copyright 2011 IBM Corp. + */ + +//#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +struct ics_native { + struct ics ics; + struct device_node *node; + void __iomem *base; + u32 ibase; + u32 icount; +}; +#define to_ics_native(_ics) container_of(_ics, struct ics_native, ics) + +static void __iomem *ics_native_xive(struct ics_native *in, unsigned int vec) +{ + return in->base + 0x800 + ((vec - in->ibase) << 2); +} + +static void ics_native_unmask_irq(struct irq_data *d) +{ + unsigned int vec = (unsigned int)irqd_to_hwirq(d); + struct ics *ics = irq_data_get_irq_chip_data(d); + struct ics_native *in = to_ics_native(ics); + unsigned int server; + + pr_devel("ics-native: unmask virq %d [hw 0x%x]\n", d->irq, vec); + + if (vec < in->ibase || vec >= (in->ibase + in->icount)) + return; + + server = xics_get_irq_server(d->irq, irq_data_get_affinity_mask(d), 0); + out_be32(ics_native_xive(in, vec), (server << 8) | DEFAULT_PRIORITY); +} + +static unsigned int ics_native_startup(struct irq_data *d) +{ +#ifdef CONFIG_PCI_MSI + /* + * The generic MSI code returns with the interrupt disabled on the + * card, using the MSI mask bits. Firmware doesn't appear to unmask + * at that level, so we do it here by hand. + */ + if (irq_data_get_msi_desc(d)) + pci_msi_unmask_irq(d); +#endif + + /* unmask it */ + ics_native_unmask_irq(d); + return 0; +} + +static void ics_native_do_mask(struct ics_native *in, unsigned int vec) +{ + out_be32(ics_native_xive(in, vec), 0xff); +} + +static void ics_native_mask_irq(struct irq_data *d) +{ + unsigned int vec = (unsigned int)irqd_to_hwirq(d); + struct ics *ics = irq_data_get_irq_chip_data(d); + struct ics_native *in = to_ics_native(ics); + + pr_devel("ics-native: mask virq %d [hw 0x%x]\n", d->irq, vec); + + if (vec < in->ibase || vec >= (in->ibase + in->icount)) + return; + ics_native_do_mask(in, vec); +} + +static int ics_native_set_affinity(struct irq_data *d, + const struct cpumask *cpumask, + bool force) +{ + unsigned int vec = (unsigned int)irqd_to_hwirq(d); + struct ics *ics = irq_data_get_irq_chip_data(d); + struct ics_native *in = to_ics_native(ics); + int server; + u32 xive; + + if (vec < in->ibase || vec >= (in->ibase + in->icount)) + return -EINVAL; + + server = xics_get_irq_server(d->irq, cpumask, 1); + if (server == -1) { + pr_warn("%s: No online cpus in the mask %*pb for irq %d\n", + __func__, cpumask_pr_args(cpumask), d->irq); + return -1; + } + + xive = in_be32(ics_native_xive(in, vec)); + xive = (xive & 0xff) | (server << 8); + out_be32(ics_native_xive(in, vec), xive); + + return IRQ_SET_MASK_OK; +} + +static struct irq_chip ics_native_irq_chip = { + .name = "ICS", + .irq_startup = ics_native_startup, + .irq_mask = ics_native_mask_irq, + .irq_unmask = ics_native_unmask_irq, + .irq_eoi = NULL, /* Patched at init time */ + .irq_set_affinity = ics_native_set_affinity, + .irq_set_type = xics_set_irq_type, + .irq_retrigger = xics_retrigger, +}; + +static int ics_native_check(struct ics *ics, unsigned int hw_irq) +{ + struct ics_native *in = to_ics_native(ics); + + pr_devel("%s: hw_irq=0x%x\n", __func__, hw_irq); + + if (hw_irq < in->ibase || hw_irq >= (in->ibase + in->icount)) + return -EINVAL; + + return 0; +} + +static void ics_native_mask_unknown(struct ics *ics, unsigned long vec) +{ + struct ics_native *in = to_ics_native(ics); + + if (vec < in->ibase || vec >= (in->ibase + in->icount)) + return; + + ics_native_do_mask(in, vec); +} + +static long ics_native_get_server(struct ics *ics, unsigned long vec) +{ + struct ics_native *in = to_ics_native(ics); + u32 xive; + + if (vec < in->ibase || vec >= (in->ibase + in->icount)) + return -EINVAL; + + xive = in_be32(ics_native_xive(in, vec)); + return (xive >> 8) & 0xfff; +} + +static int ics_native_host_match(struct ics *ics, struct device_node *node) +{ + struct ics_native *in = to_ics_native(ics); + + return in->node == node; +} + +static struct ics ics_native_template = { + .check = ics_native_check, + .mask_unknown = ics_native_mask_unknown, + .get_server = ics_native_get_server, + .host_match = ics_native_host_match, + .chip = &ics_native_irq_chip, +}; + +static int __init ics_native_add_one(struct device_node *np) +{ + struct ics_native *ics; + u32 ranges[2]; + int rc, count; + + ics = kzalloc(sizeof(struct ics_native), GFP_KERNEL); + if (!ics) + return -ENOMEM; + ics->node = of_node_get(np); + memcpy(&ics->ics, &ics_native_template, sizeof(struct ics)); + + ics->base = of_iomap(np, 0); + if (!ics->base) { + pr_err("Failed to map %pOFP\n", np); + rc = -ENOMEM; + goto fail; + } + + count = of_property_count_u32_elems(np, "interrupt-ranges"); + if (count < 2 || count & 1) { + pr_err("Failed to read interrupt-ranges of %pOFP\n", np); + rc = -EINVAL; + goto fail; + } + if (count > 2) { + pr_warn("ICS %pOFP has %d ranges, only one supported\n", + np, count >> 1); + } + rc = of_property_read_u32_array(np, "interrupt-ranges", + ranges, 2); + if (rc) { + pr_err("Failed to read interrupt-ranges of %pOFP\n", np); + goto fail; + } + ics->ibase = ranges[0]; + ics->icount = ranges[1]; + + pr_info("ICS native initialized for sources %d..%d\n", + ics->ibase, ics->ibase + ics->icount - 1); + + /* Register ourselves */ + xics_register_ics(&ics->ics); + + return 0; +fail: + of_node_put(ics->node); + kfree(ics); + return rc; +} + +int __init ics_native_init(void) +{ + struct device_node *ics; + bool found_one = false; + + /* We need to patch our irq chip's EOI to point to the + * right ICP + */ + ics_native_irq_chip.irq_eoi = icp_ops->eoi; + + /* Find native ICS in the device-tree */ + for_each_compatible_node(ics, NULL, "openpower,xics-sources") { + if (ics_native_add_one(ics) == 0) + found_one = true; + } + + if (found_one) + pr_info("ICS native backend registered\n"); + + return found_one ? 0 : -ENODEV; +} -- cgit v1.2.3