From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/riscv/include/asm/uaccess.h | 341 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 341 insertions(+) create mode 100644 arch/riscv/include/asm/uaccess.h (limited to 'arch/riscv/include/asm/uaccess.h') diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h new file mode 100644 index 000000000..ec0cab9fb --- /dev/null +++ b/arch/riscv/include/asm/uaccess.h @@ -0,0 +1,341 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2012 Regents of the University of California + * + * This file was copied from include/asm-generic/uaccess.h + */ + +#ifndef _ASM_RISCV_UACCESS_H +#define _ASM_RISCV_UACCESS_H + +#include +#include /* for TASK_SIZE */ + +/* + * User space memory access functions + */ +#ifdef CONFIG_MMU +#include +#include +#include +#include +#include +#include +#include + +#define __enable_user_access() \ + __asm__ __volatile__ ("csrs sstatus, %0" : : "r" (SR_SUM) : "memory") +#define __disable_user_access() \ + __asm__ __volatile__ ("csrc sstatus, %0" : : "r" (SR_SUM) : "memory") + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +#define __LSW 0 +#define __MSW 1 + +/* + * The "__xxx" versions of the user access functions do not verify the address + * space - it must have been done previously with a separate "access_ok()" + * call. + */ + +#define __get_user_asm(insn, x, ptr, err) \ +do { \ + __typeof__(x) __x; \ + __asm__ __volatile__ ( \ + "1:\n" \ + " " insn " %1, %2\n" \ + "2:\n" \ + _ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 2b, %0, %1) \ + : "+r" (err), "=&r" (__x) \ + : "m" (*(ptr))); \ + (x) = __x; \ +} while (0) + +#ifdef CONFIG_64BIT +#define __get_user_8(x, ptr, err) \ + __get_user_asm("ld", x, ptr, err) +#else /* !CONFIG_64BIT */ +#define __get_user_8(x, ptr, err) \ +do { \ + u32 __user *__ptr = (u32 __user *)(ptr); \ + u32 __lo, __hi; \ + __asm__ __volatile__ ( \ + "1:\n" \ + " lw %1, %3\n" \ + "2:\n" \ + " lw %2, %4\n" \ + "3:\n" \ + _ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 3b, %0, %1) \ + _ASM_EXTABLE_UACCESS_ERR_ZERO(2b, 3b, %0, %1) \ + : "+r" (err), "=&r" (__lo), "=r" (__hi) \ + : "m" (__ptr[__LSW]), "m" (__ptr[__MSW])); \ + if (err) \ + __hi = 0; \ + (x) = (__typeof__(x))((__typeof__((x)-(x)))( \ + (((u64)__hi << 32) | __lo))); \ +} while (0) +#endif /* CONFIG_64BIT */ + +#define __get_user_nocheck(x, __gu_ptr, __gu_err) \ +do { \ + switch (sizeof(*__gu_ptr)) { \ + case 1: \ + __get_user_asm("lb", (x), __gu_ptr, __gu_err); \ + break; \ + case 2: \ + __get_user_asm("lh", (x), __gu_ptr, __gu_err); \ + break; \ + case 4: \ + __get_user_asm("lw", (x), __gu_ptr, __gu_err); \ + break; \ + case 8: \ + __get_user_8((x), __gu_ptr, __gu_err); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ +} while (0) + +/** + * __get_user: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user(x, ptr) \ +({ \ + const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \ + long __gu_err = 0; \ + \ + __chk_user_ptr(__gu_ptr); \ + \ + __enable_user_access(); \ + __get_user_nocheck(x, __gu_ptr, __gu_err); \ + __disable_user_access(); \ + \ + __gu_err; \ +}) + +/** + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user(x, ptr) \ +({ \ + const __typeof__(*(ptr)) __user *__p = (ptr); \ + might_fault(); \ + access_ok(__p, sizeof(*__p)) ? \ + __get_user((x), __p) : \ + ((x) = (__force __typeof__(x))0, -EFAULT); \ +}) + +#define __put_user_asm(insn, x, ptr, err) \ +do { \ + __typeof__(*(ptr)) __x = x; \ + __asm__ __volatile__ ( \ + "1:\n" \ + " " insn " %z2, %1\n" \ + "2:\n" \ + _ASM_EXTABLE_UACCESS_ERR(1b, 2b, %0) \ + : "+r" (err), "=m" (*(ptr)) \ + : "rJ" (__x)); \ +} while (0) + +#ifdef CONFIG_64BIT +#define __put_user_8(x, ptr, err) \ + __put_user_asm("sd", x, ptr, err) +#else /* !CONFIG_64BIT */ +#define __put_user_8(x, ptr, err) \ +do { \ + u32 __user *__ptr = (u32 __user *)(ptr); \ + u64 __x = (__typeof__((x)-(x)))(x); \ + __asm__ __volatile__ ( \ + "1:\n" \ + " sw %z3, %1\n" \ + "2:\n" \ + " sw %z4, %2\n" \ + "3:\n" \ + _ASM_EXTABLE_UACCESS_ERR(1b, 3b, %0) \ + _ASM_EXTABLE_UACCESS_ERR(2b, 3b, %0) \ + : "+r" (err), \ + "=m" (__ptr[__LSW]), \ + "=m" (__ptr[__MSW]) \ + : "rJ" (__x), "rJ" (__x >> 32)); \ +} while (0) +#endif /* CONFIG_64BIT */ + +#define __put_user_nocheck(x, __gu_ptr, __pu_err) \ +do { \ + switch (sizeof(*__gu_ptr)) { \ + case 1: \ + __put_user_asm("sb", (x), __gu_ptr, __pu_err); \ + break; \ + case 2: \ + __put_user_asm("sh", (x), __gu_ptr, __pu_err); \ + break; \ + case 4: \ + __put_user_asm("sw", (x), __gu_ptr, __pu_err); \ + break; \ + case 8: \ + __put_user_8((x), __gu_ptr, __pu_err); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ +} while (0) + +/** + * __put_user: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. The value of @x is copied to avoid + * re-ordering where @x is evaluated inside the block that enables user-space + * access (thus bypassing user space protection if @x is a function). + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user(x, ptr) \ +({ \ + __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \ + __typeof__(*__gu_ptr) __val = (x); \ + long __pu_err = 0; \ + \ + __chk_user_ptr(__gu_ptr); \ + \ + __enable_user_access(); \ + __put_user_nocheck(__val, __gu_ptr, __pu_err); \ + __disable_user_access(); \ + \ + __pu_err; \ +}) + +/** + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user(x, ptr) \ +({ \ + __typeof__(*(ptr)) __user *__p = (ptr); \ + might_fault(); \ + access_ok(__p, sizeof(*__p)) ? \ + __put_user((x), __p) : \ + -EFAULT; \ +}) + + +unsigned long __must_check __asm_copy_to_user(void __user *to, + const void *from, unsigned long n); +unsigned long __must_check __asm_copy_from_user(void *to, + const void __user *from, unsigned long n); + +static inline unsigned long +raw_copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __asm_copy_from_user(to, from, n); +} + +static inline unsigned long +raw_copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __asm_copy_to_user(to, from, n); +} + +extern long strncpy_from_user(char *dest, const char __user *src, long count); + +extern long __must_check strnlen_user(const char __user *str, long n); + +extern +unsigned long __must_check __clear_user(void __user *addr, unsigned long n); + +static inline +unsigned long __must_check clear_user(void __user *to, unsigned long n) +{ + might_fault(); + return access_ok(to, n) ? + __clear_user(to, n) : n; +} + +#define __get_kernel_nofault(dst, src, type, err_label) \ +do { \ + long __kr_err; \ + \ + __get_user_nocheck(*((type *)(dst)), (type *)(src), __kr_err); \ + if (unlikely(__kr_err)) \ + goto err_label; \ +} while (0) + +#define __put_kernel_nofault(dst, src, type, err_label) \ +do { \ + long __kr_err; \ + \ + __put_user_nocheck(*((type *)(src)), (type *)(dst), __kr_err); \ + if (unlikely(__kr_err)) \ + goto err_label; \ +} while (0) + +#else /* CONFIG_MMU */ +#include +#endif /* CONFIG_MMU */ +#endif /* _ASM_RISCV_UACCESS_H */ -- cgit v1.2.3