From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/riscv/net/bpf_jit_core.c | 199 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 199 insertions(+) create mode 100644 arch/riscv/net/bpf_jit_core.c (limited to 'arch/riscv/net/bpf_jit_core.c') diff --git a/arch/riscv/net/bpf_jit_core.c b/arch/riscv/net/bpf_jit_core.c new file mode 100644 index 000000000..737baf871 --- /dev/null +++ b/arch/riscv/net/bpf_jit_core.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common functionality for RV32 and RV64 BPF JIT compilers + * + * Copyright (c) 2019 Björn Töpel + * + */ + +#include +#include +#include "bpf_jit.h" + +/* Number of iterations to try until offsets converge. */ +#define NR_JIT_ITERATIONS 32 + +static int build_body(struct rv_jit_context *ctx, bool extra_pass, int *offset) +{ + const struct bpf_prog *prog = ctx->prog; + int i; + + for (i = 0; i < prog->len; i++) { + const struct bpf_insn *insn = &prog->insnsi[i]; + int ret; + + ret = bpf_jit_emit_insn(insn, ctx, extra_pass); + /* BPF_LD | BPF_IMM | BPF_DW: skip the next instruction. */ + if (ret > 0) + i++; + if (offset) + offset[i] = ctx->ninsns; + if (ret < 0) + return ret; + } + return 0; +} + +bool bpf_jit_needs_zext(void) +{ + return true; +} + +struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) +{ + unsigned int prog_size = 0, extable_size = 0; + bool tmp_blinded = false, extra_pass = false; + struct bpf_prog *tmp, *orig_prog = prog; + int pass = 0, prev_ninsns = 0, prologue_len, i; + struct rv_jit_data *jit_data; + struct rv_jit_context *ctx; + + if (!prog->jit_requested) + return orig_prog; + + tmp = bpf_jit_blind_constants(prog); + if (IS_ERR(tmp)) + return orig_prog; + if (tmp != prog) { + tmp_blinded = true; + prog = tmp; + } + + jit_data = prog->aux->jit_data; + if (!jit_data) { + jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL); + if (!jit_data) { + prog = orig_prog; + goto out; + } + prog->aux->jit_data = jit_data; + } + + ctx = &jit_data->ctx; + + if (ctx->offset) { + extra_pass = true; + prog_size = sizeof(*ctx->insns) * ctx->ninsns; + goto skip_init_ctx; + } + + ctx->prog = prog; + ctx->offset = kcalloc(prog->len, sizeof(int), GFP_KERNEL); + if (!ctx->offset) { + prog = orig_prog; + goto out_offset; + } + for (i = 0; i < prog->len; i++) { + prev_ninsns += 32; + ctx->offset[i] = prev_ninsns; + } + + for (i = 0; i < NR_JIT_ITERATIONS; i++) { + pass++; + ctx->ninsns = 0; + if (build_body(ctx, extra_pass, ctx->offset)) { + prog = orig_prog; + goto out_offset; + } + ctx->body_len = ctx->ninsns; + bpf_jit_build_prologue(ctx); + ctx->epilogue_offset = ctx->ninsns; + bpf_jit_build_epilogue(ctx); + + if (ctx->ninsns == prev_ninsns) { + if (jit_data->header) + break; + /* obtain the actual image size */ + extable_size = prog->aux->num_exentries * + sizeof(struct exception_table_entry); + prog_size = sizeof(*ctx->insns) * ctx->ninsns; + + jit_data->header = + bpf_jit_binary_alloc(prog_size + extable_size, + &jit_data->image, + sizeof(u32), + bpf_fill_ill_insns); + if (!jit_data->header) { + prog = orig_prog; + goto out_offset; + } + + ctx->insns = (u16 *)jit_data->image; + /* + * Now, when the image is allocated, the image can + * potentially shrink more (auipc/jalr -> jal). + */ + } + prev_ninsns = ctx->ninsns; + } + + if (i == NR_JIT_ITERATIONS) { + pr_err("bpf-jit: image did not converge in <%d passes!\n", i); + if (jit_data->header) + bpf_jit_binary_free(jit_data->header); + prog = orig_prog; + goto out_offset; + } + + if (extable_size) + prog->aux->extable = (void *)ctx->insns + prog_size; + +skip_init_ctx: + pass++; + ctx->ninsns = 0; + ctx->nexentries = 0; + + bpf_jit_build_prologue(ctx); + if (build_body(ctx, extra_pass, NULL)) { + bpf_jit_binary_free(jit_data->header); + prog = orig_prog; + goto out_offset; + } + bpf_jit_build_epilogue(ctx); + + if (bpf_jit_enable > 1) + bpf_jit_dump(prog->len, prog_size, pass, ctx->insns); + + prog->bpf_func = (void *)ctx->insns; + prog->jited = 1; + prog->jited_len = prog_size; + + bpf_flush_icache(jit_data->header, ctx->insns + ctx->ninsns); + + if (!prog->is_func || extra_pass) { + bpf_jit_binary_lock_ro(jit_data->header); + prologue_len = ctx->epilogue_offset - ctx->body_len; + for (i = 0; i < prog->len; i++) + ctx->offset[i] = ninsns_rvoff(prologue_len + + ctx->offset[i]); + bpf_prog_fill_jited_linfo(prog, ctx->offset); +out_offset: + kfree(ctx->offset); + kfree(jit_data); + prog->aux->jit_data = NULL; + } +out: + + if (tmp_blinded) + bpf_jit_prog_release_other(prog, prog == orig_prog ? + tmp : orig_prog); + return prog; +} + +u64 bpf_jit_alloc_exec_limit(void) +{ + return BPF_JIT_REGION_SIZE; +} + +void *bpf_jit_alloc_exec(unsigned long size) +{ + return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START, + BPF_JIT_REGION_END, GFP_KERNEL, + PAGE_KERNEL, 0, NUMA_NO_NODE, + __builtin_return_address(0)); +} + +void bpf_jit_free_exec(void *addr) +{ + return vfree(addr); +} -- cgit v1.2.3