From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/s390/boot/Makefile | 131 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 131 insertions(+) create mode 100644 arch/s390/boot/Makefile (limited to 'arch/s390/boot/Makefile') diff --git a/arch/s390/boot/Makefile b/arch/s390/boot/Makefile new file mode 100644 index 000000000..47a397da0 --- /dev/null +++ b/arch/s390/boot/Makefile @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the linux s390-specific parts of the memory manager. +# + +KCOV_INSTRUMENT := n +GCOV_PROFILE := n +UBSAN_SANITIZE := n +KASAN_SANITIZE := n +KCSAN_SANITIZE := n + +KBUILD_AFLAGS := $(KBUILD_AFLAGS_DECOMPRESSOR) +KBUILD_CFLAGS := $(KBUILD_CFLAGS_DECOMPRESSOR) + +# +# Use minimum architecture for als.c to be able to print an error +# message if the kernel is started on a machine which is too old +# +ifndef CONFIG_CC_IS_CLANG +CC_FLAGS_MARCH_MINIMUM := -march=z900 +else +CC_FLAGS_MARCH_MINIMUM := -march=z10 +endif + +ifneq ($(CC_FLAGS_MARCH),$(CC_FLAGS_MARCH_MINIMUM)) +AFLAGS_REMOVE_head.o += $(CC_FLAGS_MARCH) +AFLAGS_head.o += $(CC_FLAGS_MARCH_MINIMUM) +AFLAGS_REMOVE_mem.o += $(CC_FLAGS_MARCH) +AFLAGS_mem.o += $(CC_FLAGS_MARCH_MINIMUM) +CFLAGS_REMOVE_als.o += $(CC_FLAGS_MARCH) +CFLAGS_als.o += $(CC_FLAGS_MARCH_MINIMUM) +CFLAGS_REMOVE_sclp_early_core.o += $(CC_FLAGS_MARCH) +CFLAGS_sclp_early_core.o += $(CC_FLAGS_MARCH_MINIMUM) +endif + +CFLAGS_sclp_early_core.o += -I$(srctree)/drivers/s390/char + +obj-y := head.o als.o startup.o mem_detect.o ipl_parm.o ipl_report.o vmem.o +obj-y += string.o ebcdic.o sclp_early_core.o mem.o ipl_vmparm.o cmdline.o +obj-y += version.o pgm_check_info.o ctype.o ipl_data.o machine_kexec_reloc.o +obj-$(findstring y, $(CONFIG_PROTECTED_VIRTUALIZATION_GUEST) $(CONFIG_PGSTE)) += uv.o +obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o +obj-y += $(if $(CONFIG_KERNEL_UNCOMPRESSED),,decompressor.o) info.o +obj-$(CONFIG_KERNEL_ZSTD) += clz_ctz.o +obj-all := $(obj-y) piggy.o syms.o + +targets := bzImage section_cmp.boot.data section_cmp.boot.preserved.data $(obj-y) +targets += vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 +targets += vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.lz4 +targets += vmlinux.bin.zst info.bin syms.bin vmlinux.syms $(obj-all) + +OBJECTS := $(addprefix $(obj)/,$(obj-y)) +OBJECTS_ALL := $(addprefix $(obj)/,$(obj-all)) + +quiet_cmd_section_cmp = SECTCMP $* +define cmd_section_cmp + s1=`$(OBJDUMP) -t -j "$*" "$<" | sort | \ + sed -n "/0000000000000000/! s/.*\s$*\s\+//p" | sha256sum`; \ + s2=`$(OBJDUMP) -t -j "$*" "$(word 2,$^)" | sort | \ + sed -n "/0000000000000000/! s/.*\s$*\s\+//p" | sha256sum`; \ + if [ "$$s1" != "$$s2" ]; then \ + echo "error: section $* differs between $< and $(word 2,$^)" >&2; \ + exit 1; \ + fi; \ + touch $@ +endef + +$(obj)/bzImage: $(obj)/vmlinux $(obj)/section_cmp.boot.data $(obj)/section_cmp.boot.preserved.data FORCE + $(call if_changed,objcopy) + +$(obj)/section_cmp%: vmlinux $(obj)/vmlinux FORCE + $(call if_changed,section_cmp) + +LDFLAGS_vmlinux := --oformat $(LD_BFD) -e startup --build-id=sha1 -T +$(obj)/vmlinux: $(obj)/vmlinux.lds $(OBJECTS_ALL) FORCE + $(call if_changed,ld) + +LDFLAGS_vmlinux.syms := --oformat $(LD_BFD) -e startup -T +$(obj)/vmlinux.syms: $(obj)/vmlinux.lds $(OBJECTS) FORCE + $(call if_changed,ld) + +quiet_cmd_dumpsyms = DUMPSYMS $< +define cmd_dumpsyms + $(NM) -n -S --format=bsd "$<" | sed -nE 's/^0*([0-9a-fA-F]+) 0*([0-9a-fA-F]+) [tT] ([^ ]*)$$/\1 \2 \3/p' | tr '\n' '\0' > "$@" +endef + +$(obj)/syms.bin: $(obj)/vmlinux.syms FORCE + $(call if_changed,dumpsyms) + +OBJCOPYFLAGS_syms.o := -I binary -O elf64-s390 -B s390:64-bit --rename-section .data=.decompressor.syms +$(obj)/syms.o: $(obj)/syms.bin FORCE + $(call if_changed,objcopy) + +OBJCOPYFLAGS_info.bin := -O binary --only-section=.vmlinux.info --set-section-flags .vmlinux.info=load +$(obj)/info.bin: vmlinux FORCE + $(call if_changed,objcopy) + +OBJCOPYFLAGS_info.o := -I binary -O elf64-s390 -B s390:64-bit --rename-section .data=.vmlinux.info +$(obj)/info.o: $(obj)/info.bin FORCE + $(call if_changed,objcopy) + +OBJCOPYFLAGS_vmlinux.bin := -O binary --remove-section=.comment --remove-section=.vmlinux.info -S +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +suffix-$(CONFIG_KERNEL_GZIP) := .gz +suffix-$(CONFIG_KERNEL_BZIP2) := .bz2 +suffix-$(CONFIG_KERNEL_LZ4) := .lz4 +suffix-$(CONFIG_KERNEL_LZMA) := .lzma +suffix-$(CONFIG_KERNEL_LZO) := .lzo +suffix-$(CONFIG_KERNEL_XZ) := .xz +suffix-$(CONFIG_KERNEL_ZSTD) := .zst + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE + $(call if_changed,bzip2_with_size) +$(obj)/vmlinux.bin.lz4: $(obj)/vmlinux.bin FORCE + $(call if_changed,lz4_with_size) +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma_with_size) +$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzo_with_size) +$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE + $(call if_changed,xzkern_with_size) +$(obj)/vmlinux.bin.zst: $(obj)/vmlinux.bin FORCE + $(call if_changed,zstd22_with_size) + +OBJCOPYFLAGS_piggy.o := -I binary -O elf64-s390 -B s390:64-bit --rename-section .data=.vmlinux.bin.compressed +$(obj)/piggy.o: $(obj)/vmlinux.bin$(suffix-y) FORCE + $(call if_changed,objcopy) -- cgit v1.2.3