From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/s390/include/asm/pci_io.h | 202 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 202 insertions(+) create mode 100644 arch/s390/include/asm/pci_io.h (limited to 'arch/s390/include/asm/pci_io.h') diff --git a/arch/s390/include/asm/pci_io.h b/arch/s390/include/asm/pci_io.h new file mode 100644 index 000000000..287bb88f7 --- /dev/null +++ b/arch/s390/include/asm/pci_io.h @@ -0,0 +1,202 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_S390_PCI_IO_H +#define _ASM_S390_PCI_IO_H + +#ifdef CONFIG_PCI + +#include +#include +#include + +/* I/O size constraints */ +#define ZPCI_MAX_READ_SIZE 8 +#define ZPCI_MAX_WRITE_SIZE 128 + +/* I/O Map */ +#define ZPCI_IOMAP_SHIFT 48 +#define ZPCI_IOMAP_ADDR_SHIFT 62 +#define ZPCI_IOMAP_ADDR_BASE (1UL << ZPCI_IOMAP_ADDR_SHIFT) +#define ZPCI_IOMAP_ADDR_OFF_MASK ((1UL << ZPCI_IOMAP_SHIFT) - 1) +#define ZPCI_IOMAP_MAX_ENTRIES \ + (1UL << (ZPCI_IOMAP_ADDR_SHIFT - ZPCI_IOMAP_SHIFT)) +#define ZPCI_IOMAP_ADDR_IDX_MASK \ + ((ZPCI_IOMAP_ADDR_BASE - 1) & ~ZPCI_IOMAP_ADDR_OFF_MASK) + +struct zpci_iomap_entry { + u32 fh; + u8 bar; + u16 count; +}; + +extern struct zpci_iomap_entry *zpci_iomap_start; + +#define ZPCI_ADDR(idx) (ZPCI_IOMAP_ADDR_BASE | ((u64) idx << ZPCI_IOMAP_SHIFT)) +#define ZPCI_IDX(addr) \ + (((__force u64) addr & ZPCI_IOMAP_ADDR_IDX_MASK) >> ZPCI_IOMAP_SHIFT) +#define ZPCI_OFFSET(addr) \ + ((__force u64) addr & ZPCI_IOMAP_ADDR_OFF_MASK) + +#define ZPCI_CREATE_REQ(handle, space, len) \ + ((u64) handle << 32 | space << 16 | len) + +#define zpci_read(LENGTH, RETTYPE) \ +static inline RETTYPE zpci_read_##RETTYPE(const volatile void __iomem *addr) \ +{ \ + u64 data; \ + int rc; \ + \ + rc = zpci_load(&data, addr, LENGTH); \ + if (rc) \ + data = -1ULL; \ + return (RETTYPE) data; \ +} + +#define zpci_write(LENGTH, VALTYPE) \ +static inline void zpci_write_##VALTYPE(VALTYPE val, \ + const volatile void __iomem *addr) \ +{ \ + u64 data = (VALTYPE) val; \ + \ + zpci_store(addr, data, LENGTH); \ +} + +zpci_read(8, u64) +zpci_read(4, u32) +zpci_read(2, u16) +zpci_read(1, u8) +zpci_write(8, u64) +zpci_write(4, u32) +zpci_write(2, u16) +zpci_write(1, u8) + +static inline int zpci_write_single(volatile void __iomem *dst, const void *src, + unsigned long len) +{ + u64 val; + + switch (len) { + case 1: + val = (u64) *((u8 *) src); + break; + case 2: + val = (u64) *((u16 *) src); + break; + case 4: + val = (u64) *((u32 *) src); + break; + case 8: + val = (u64) *((u64 *) src); + break; + default: + val = 0; /* let FW report error */ + break; + } + return zpci_store(dst, val, len); +} + +static inline int zpci_read_single(void *dst, const volatile void __iomem *src, + unsigned long len) +{ + u64 data; + int cc; + + cc = zpci_load(&data, src, len); + if (cc) + goto out; + + switch (len) { + case 1: + *((u8 *) dst) = (u8) data; + break; + case 2: + *((u16 *) dst) = (u16) data; + break; + case 4: + *((u32 *) dst) = (u32) data; + break; + case 8: + *((u64 *) dst) = (u64) data; + break; + } +out: + return cc; +} + +int zpci_write_block(volatile void __iomem *dst, const void *src, + unsigned long len); + +static inline u8 zpci_get_max_write_size(u64 src, u64 dst, int len, int max) +{ + int count = len > max ? max : len, size = 1; + + while (!(src & 0x1) && !(dst & 0x1) && ((size << 1) <= count)) { + dst = dst >> 1; + src = src >> 1; + size = size << 1; + } + return size; +} + +static inline int zpci_memcpy_fromio(void *dst, + const volatile void __iomem *src, + unsigned long n) +{ + int size, rc = 0; + + while (n > 0) { + size = zpci_get_max_write_size((u64 __force) src, + (u64) dst, n, + ZPCI_MAX_READ_SIZE); + rc = zpci_read_single(dst, src, size); + if (rc) + break; + src += size; + dst += size; + n -= size; + } + return rc; +} + +static inline int zpci_memcpy_toio(volatile void __iomem *dst, + const void *src, unsigned long n) +{ + int size, rc = 0; + + if (!src) + return -EINVAL; + + while (n > 0) { + size = zpci_get_max_write_size((u64 __force) dst, + (u64) src, n, + ZPCI_MAX_WRITE_SIZE); + if (size > 8) /* main path */ + rc = zpci_write_block(dst, src, size); + else + rc = zpci_write_single(dst, src, size); + if (rc) + break; + src += size; + dst += size; + n -= size; + } + return rc; +} + +static inline int zpci_memset_io(volatile void __iomem *dst, + unsigned char val, size_t count) +{ + u8 *src = kmalloc(count, GFP_KERNEL); + int rc; + + if (src == NULL) + return -ENOMEM; + memset(src, val, count); + + rc = zpci_memcpy_toio(dst, src, count); + kfree(src); + return rc; +} + +#endif /* CONFIG_PCI */ + +#endif /* _ASM_S390_PCI_IO_H */ -- cgit v1.2.3