From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/s390/include/asm/trace/diag.h | 44 +++++++++++++ arch/s390/include/asm/trace/zcrypt.h | 123 +++++++++++++++++++++++++++++++++++ 2 files changed, 167 insertions(+) create mode 100644 arch/s390/include/asm/trace/diag.h create mode 100644 arch/s390/include/asm/trace/zcrypt.h (limited to 'arch/s390/include/asm/trace') diff --git a/arch/s390/include/asm/trace/diag.h b/arch/s390/include/asm/trace/diag.h new file mode 100644 index 000000000..22fcac4ff --- /dev/null +++ b/arch/s390/include/asm/trace/diag.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Tracepoint header for s390 diagnose calls + * + * Copyright IBM Corp. 2015 + * Author(s): Martin Schwidefsky + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM s390 + +#if !defined(_TRACE_S390_DIAG_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_S390_DIAG_H + +#include + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH asm/trace +#define TRACE_INCLUDE_FILE diag + +TRACE_EVENT(s390_diagnose, + TP_PROTO(unsigned short nr), + TP_ARGS(nr), + TP_STRUCT__entry( + __field(unsigned short, nr) + ), + TP_fast_assign( + __entry->nr = nr; + ), + TP_printk("nr=0x%x", __entry->nr) +); + +#ifdef CONFIG_TRACEPOINTS +void trace_s390_diagnose_norecursion(int diag_nr); +#else +static inline void trace_s390_diagnose_norecursion(int diag_nr) { } +#endif + +#endif /* _TRACE_S390_DIAG_H */ + +/* This part must be outside protection */ +#include diff --git a/arch/s390/include/asm/trace/zcrypt.h b/arch/s390/include/asm/trace/zcrypt.h new file mode 100644 index 000000000..457ddaa99 --- /dev/null +++ b/arch/s390/include/asm/trace/zcrypt.h @@ -0,0 +1,123 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Tracepoint definitions for the s390 zcrypt device driver + * + * Copyright IBM Corp. 2016 + * Author(s): Harald Freudenberger + * + * Currently there are two tracepoint events defined here. + * An s390_zcrypt_req request event occurs as soon as the request is + * recognized by the zcrypt ioctl function. This event may act as some kind + * of request-processing-starts-now indication. + * As late as possible within the zcrypt ioctl function there occurs the + * s390_zcrypt_rep event which may act as the point in time where the + * request has been processed by the kernel and the result is about to be + * transferred back to userspace. + * The glue which binds together request and reply event is the ptr + * parameter, which is the local buffer address where the request from + * userspace has been stored by the ioctl function. + * + * The main purpose of this zcrypt tracepoint api is to get some data for + * performance measurements together with information about on which card + * and queue the request has been processed. It is not an ffdc interface as + * there is already code in the zcrypt device driver to serve the s390 + * debug feature interface. + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM s390 + +#if !defined(_TRACE_S390_ZCRYPT_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_S390_ZCRYPT_H + +#include + +#define TP_ICARSAMODEXPO 0x0001 +#define TP_ICARSACRT 0x0002 +#define TB_ZSECSENDCPRB 0x0003 +#define TP_ZSENDEP11CPRB 0x0004 +#define TP_HWRNGCPRB 0x0005 + +#define show_zcrypt_tp_type(type) \ + __print_symbolic(type, \ + { TP_ICARSAMODEXPO, "ICARSAMODEXPO" }, \ + { TP_ICARSACRT, "ICARSACRT" }, \ + { TB_ZSECSENDCPRB, "ZSECSENDCPRB" }, \ + { TP_ZSENDEP11CPRB, "ZSENDEP11CPRB" }, \ + { TP_HWRNGCPRB, "HWRNGCPRB" }) + +/** + * trace_s390_zcrypt_req - zcrypt request tracepoint function + * @ptr: Address of the local buffer where the request from userspace + * is stored. Can be used as a unique id to relate together + * request and reply. + * @type: One of the TP_ defines above. + * + * Called when a request from userspace is recognised within the ioctl + * function of the zcrypt device driver and may act as an entry + * timestamp. + */ +TRACE_EVENT(s390_zcrypt_req, + TP_PROTO(void *ptr, u32 type), + TP_ARGS(ptr, type), + TP_STRUCT__entry( + __field(void *, ptr) + __field(u32, type)), + TP_fast_assign( + __entry->ptr = ptr; + __entry->type = type;), + TP_printk("ptr=%p type=%s", + __entry->ptr, + show_zcrypt_tp_type(__entry->type)) +); + +/** + * trace_s390_zcrypt_rep - zcrypt reply tracepoint function + * @ptr: Address of the local buffer where the request from userspace + * is stored. Can be used as a unique id to match together + * request and reply. + * @fc: Function code. + * @rc: The bare returncode as returned by the device driver ioctl + * function. + * @dev: The adapter nr where this request was actually processed. + * @dom: Domain id of the device where this request was processed. + * + * Called upon recognising the reply from the crypto adapter. This + * message may act as the exit timestamp for the request but also + * carries some info about on which adapter the request was processed + * and the returncode from the device driver. + */ +TRACE_EVENT(s390_zcrypt_rep, + TP_PROTO(void *ptr, u32 fc, u32 rc, u16 dev, u16 dom), + TP_ARGS(ptr, fc, rc, dev, dom), + TP_STRUCT__entry( + __field(void *, ptr) + __field(u32, fc) + __field(u32, rc) + __field(u16, device) + __field(u16, domain)), + TP_fast_assign( + __entry->ptr = ptr; + __entry->fc = fc; + __entry->rc = rc; + __entry->device = dev; + __entry->domain = dom;), + TP_printk("ptr=%p fc=0x%04x rc=%d dev=0x%02hx domain=0x%04hx", + __entry->ptr, + (unsigned int) __entry->fc, + (int) __entry->rc, + (unsigned short) __entry->device, + (unsigned short) __entry->domain) +); + +#endif /* _TRACE_S390_ZCRYPT_H */ + +/* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH asm/trace +#define TRACE_INCLUDE_FILE zcrypt + +#include -- cgit v1.2.3