From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/s390/include/uapi/asm/pkey.h | 447 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 447 insertions(+) create mode 100644 arch/s390/include/uapi/asm/pkey.h (limited to 'arch/s390/include/uapi/asm/pkey.h') diff --git a/arch/s390/include/uapi/asm/pkey.h b/arch/s390/include/uapi/asm/pkey.h new file mode 100644 index 000000000..924b876f9 --- /dev/null +++ b/arch/s390/include/uapi/asm/pkey.h @@ -0,0 +1,447 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Userspace interface to the pkey device driver + * + * Copyright IBM Corp. 2017, 2019 + * + * Author: Harald Freudenberger + * + */ + +#ifndef _UAPI_PKEY_H +#define _UAPI_PKEY_H + +#include +#include + +/* + * Ioctl calls supported by the pkey device driver + */ + +#define PKEY_IOCTL_MAGIC 'p' + +#define SECKEYBLOBSIZE 64 /* secure key blob size is always 64 bytes */ +#define PROTKEYBLOBSIZE 80 /* protected key blob size is always 80 bytes */ +#define MAXPROTKEYSIZE 64 /* a protected key blob may be up to 64 bytes */ +#define MAXCLRKEYSIZE 32 /* a clear key value may be up to 32 bytes */ +#define MAXAESCIPHERKEYSIZE 136 /* our aes cipher keys have always 136 bytes */ +#define MINEP11AESKEYBLOBSIZE 256 /* min EP11 AES key blob size */ +#define MAXEP11AESKEYBLOBSIZE 320 /* max EP11 AES key blob size */ + +/* Minimum size of a key blob */ +#define MINKEYBLOBSIZE SECKEYBLOBSIZE + +/* defines for the type field within the pkey_protkey struct */ +#define PKEY_KEYTYPE_AES_128 1 +#define PKEY_KEYTYPE_AES_192 2 +#define PKEY_KEYTYPE_AES_256 3 +#define PKEY_KEYTYPE_ECC 4 + +/* the newer ioctls use a pkey_key_type enum for type information */ +enum pkey_key_type { + PKEY_TYPE_CCA_DATA = (__u32) 1, + PKEY_TYPE_CCA_CIPHER = (__u32) 2, + PKEY_TYPE_EP11 = (__u32) 3, + PKEY_TYPE_CCA_ECC = (__u32) 0x1f, + PKEY_TYPE_EP11_AES = (__u32) 6, + PKEY_TYPE_EP11_ECC = (__u32) 7, +}; + +/* the newer ioctls use a pkey_key_size enum for key size information */ +enum pkey_key_size { + PKEY_SIZE_AES_128 = (__u32) 128, + PKEY_SIZE_AES_192 = (__u32) 192, + PKEY_SIZE_AES_256 = (__u32) 256, + PKEY_SIZE_UNKNOWN = (__u32) 0xFFFFFFFF, +}; + +/* some of the newer ioctls use these flags */ +#define PKEY_FLAGS_MATCH_CUR_MKVP 0x00000002 +#define PKEY_FLAGS_MATCH_ALT_MKVP 0x00000004 + +/* keygenflags defines for CCA AES cipher keys */ +#define PKEY_KEYGEN_XPRT_SYM 0x00008000 +#define PKEY_KEYGEN_XPRT_UASY 0x00004000 +#define PKEY_KEYGEN_XPRT_AASY 0x00002000 +#define PKEY_KEYGEN_XPRT_RAW 0x00001000 +#define PKEY_KEYGEN_XPRT_CPAC 0x00000800 +#define PKEY_KEYGEN_XPRT_DES 0x00000080 +#define PKEY_KEYGEN_XPRT_AES 0x00000040 +#define PKEY_KEYGEN_XPRT_RSA 0x00000008 + +/* Struct to hold apqn target info (card/domain pair) */ +struct pkey_apqn { + __u16 card; + __u16 domain; +}; + +/* Struct to hold a CCA AES secure key blob */ +struct pkey_seckey { + __u8 seckey[SECKEYBLOBSIZE]; /* the secure key blob */ +}; + +/* Struct to hold protected key and length info */ +struct pkey_protkey { + __u32 type; /* key type, one of the PKEY_KEYTYPE_AES values */ + __u32 len; /* bytes actually stored in protkey[] */ + __u8 protkey[MAXPROTKEYSIZE]; /* the protected key blob */ +}; + +/* Struct to hold an AES clear key value */ +struct pkey_clrkey { + __u8 clrkey[MAXCLRKEYSIZE]; /* 16, 24, or 32 byte clear key value */ +}; + +/* + * EP11 key blobs of type PKEY_TYPE_EP11_AES and PKEY_TYPE_EP11_ECC + * are ep11 blobs prepended by this header: + */ +struct ep11kblob_header { + __u8 type; /* always 0x00 */ + __u8 hver; /* header version, currently needs to be 0x00 */ + __u16 len; /* total length in bytes (including this header) */ + __u8 version; /* PKEY_TYPE_EP11_AES or PKEY_TYPE_EP11_ECC */ + __u8 res0; /* unused */ + __u16 bitlen; /* clear key bit len, 0 for unknown */ + __u8 res1[8]; /* unused */ +} __packed; + +/* + * Generate CCA AES secure key. + */ +struct pkey_genseck { + __u16 cardnr; /* in: card to use or FFFF for any */ + __u16 domain; /* in: domain or FFFF for any */ + __u32 keytype; /* in: key type to generate */ + struct pkey_seckey seckey; /* out: the secure key blob */ +}; +#define PKEY_GENSECK _IOWR(PKEY_IOCTL_MAGIC, 0x01, struct pkey_genseck) + +/* + * Construct CCA AES secure key from clear key value + */ +struct pkey_clr2seck { + __u16 cardnr; /* in: card to use or FFFF for any */ + __u16 domain; /* in: domain or FFFF for any */ + __u32 keytype; /* in: key type to generate */ + struct pkey_clrkey clrkey; /* in: the clear key value */ + struct pkey_seckey seckey; /* out: the secure key blob */ +}; +#define PKEY_CLR2SECK _IOWR(PKEY_IOCTL_MAGIC, 0x02, struct pkey_clr2seck) + +/* + * Fabricate AES protected key from a CCA AES secure key + */ +struct pkey_sec2protk { + __u16 cardnr; /* in: card to use or FFFF for any */ + __u16 domain; /* in: domain or FFFF for any */ + struct pkey_seckey seckey; /* in: the secure key blob */ + struct pkey_protkey protkey; /* out: the protected key */ +}; +#define PKEY_SEC2PROTK _IOWR(PKEY_IOCTL_MAGIC, 0x03, struct pkey_sec2protk) + +/* + * Fabricate AES protected key from clear key value + */ +struct pkey_clr2protk { + __u32 keytype; /* in: key type to generate */ + struct pkey_clrkey clrkey; /* in: the clear key value */ + struct pkey_protkey protkey; /* out: the protected key */ +}; +#define PKEY_CLR2PROTK _IOWR(PKEY_IOCTL_MAGIC, 0x04, struct pkey_clr2protk) + +/* + * Search for matching crypto card based on the Master Key + * Verification Pattern provided inside a CCA AES secure key. + */ +struct pkey_findcard { + struct pkey_seckey seckey; /* in: the secure key blob */ + __u16 cardnr; /* out: card number */ + __u16 domain; /* out: domain number */ +}; +#define PKEY_FINDCARD _IOWR(PKEY_IOCTL_MAGIC, 0x05, struct pkey_findcard) + +/* + * Combined together: findcard + sec2prot + */ +struct pkey_skey2pkey { + struct pkey_seckey seckey; /* in: the secure key blob */ + struct pkey_protkey protkey; /* out: the protected key */ +}; +#define PKEY_SKEY2PKEY _IOWR(PKEY_IOCTL_MAGIC, 0x06, struct pkey_skey2pkey) + +/* + * Verify the given CCA AES secure key for being able to be usable with + * the pkey module. Check for correct key type and check for having at + * least one crypto card being able to handle this key (master key + * or old master key verification pattern matches). + * Return some info about the key: keysize in bits, keytype (currently + * only AES), flag if key is wrapped with an old MKVP. + */ +struct pkey_verifykey { + struct pkey_seckey seckey; /* in: the secure key blob */ + __u16 cardnr; /* out: card number */ + __u16 domain; /* out: domain number */ + __u16 keysize; /* out: key size in bits */ + __u32 attributes; /* out: attribute bits */ +}; +#define PKEY_VERIFYKEY _IOWR(PKEY_IOCTL_MAGIC, 0x07, struct pkey_verifykey) +#define PKEY_VERIFY_ATTR_AES 0x00000001 /* key is an AES key */ +#define PKEY_VERIFY_ATTR_OLD_MKVP 0x00000100 /* key has old MKVP value */ + +/* + * Generate AES random protected key. + */ +struct pkey_genprotk { + __u32 keytype; /* in: key type to generate */ + struct pkey_protkey protkey; /* out: the protected key */ +}; + +#define PKEY_GENPROTK _IOWR(PKEY_IOCTL_MAGIC, 0x08, struct pkey_genprotk) + +/* + * Verify an AES protected key. + */ +struct pkey_verifyprotk { + struct pkey_protkey protkey; /* in: the protected key to verify */ +}; + +#define PKEY_VERIFYPROTK _IOW(PKEY_IOCTL_MAGIC, 0x09, struct pkey_verifyprotk) + +/* + * Transform an key blob (of any type) into a protected key + */ +struct pkey_kblob2pkey { + __u8 __user *key; /* in: the key blob */ + __u32 keylen; /* in: the key blob length */ + struct pkey_protkey protkey; /* out: the protected key */ +}; +#define PKEY_KBLOB2PROTK _IOWR(PKEY_IOCTL_MAGIC, 0x0A, struct pkey_kblob2pkey) + +/* + * Generate secure key, version 2. + * Generate CCA AES secure key, CCA AES cipher key or EP11 AES secure key. + * There needs to be a list of apqns given with at least one entry in there. + * All apqns in the list need to be exact apqns, 0xFFFF as ANY card or domain + * is not supported. The implementation walks through the list of apqns and + * tries to send the request to each apqn without any further checking (like + * card type or online state). If the apqn fails, simple the next one in the + * list is tried until success (return 0) or the end of the list is reached + * (return -1 with errno ENODEV). You may use the PKEY_APQNS4KT ioctl to + * generate a list of apqns based on the key type to generate. + * The keygenflags argument is passed to the low level generation functions + * individual for the key type and has a key type specific meaning. When + * generating CCA cipher keys you can use one or more of the PKEY_KEYGEN_* + * flags to widen the export possibilities. By default a cipher key is + * only exportable for CPACF (PKEY_KEYGEN_XPRT_CPAC). + * The keygenflag argument for generating an EP11 AES key should either be 0 + * to use the defaults which are XCP_BLOB_ENCRYPT, XCP_BLOB_DECRYPT and + * XCP_BLOB_PROTKEY_EXTRACTABLE or a valid combination of XCP_BLOB_* flags. + */ +struct pkey_genseck2 { + struct pkey_apqn __user *apqns; /* in: ptr to list of apqn targets*/ + __u32 apqn_entries; /* in: # of apqn target list entries */ + enum pkey_key_type type; /* in: key type to generate */ + enum pkey_key_size size; /* in: key size to generate */ + __u32 keygenflags; /* in: key generation flags */ + __u8 __user *key; /* in: pointer to key blob buffer */ + __u32 keylen; /* in: available key blob buffer size */ + /* out: actual key blob size */ +}; +#define PKEY_GENSECK2 _IOWR(PKEY_IOCTL_MAGIC, 0x11, struct pkey_genseck2) + +/* + * Generate secure key from clear key value, version 2. + * Construct an CCA AES secure key, CCA AES cipher key or EP11 AES secure + * key from a given clear key value. + * There needs to be a list of apqns given with at least one entry in there. + * All apqns in the list need to be exact apqns, 0xFFFF as ANY card or domain + * is not supported. The implementation walks through the list of apqns and + * tries to send the request to each apqn without any further checking (like + * card type or online state). If the apqn fails, simple the next one in the + * list is tried until success (return 0) or the end of the list is reached + * (return -1 with errno ENODEV). You may use the PKEY_APQNS4KT ioctl to + * generate a list of apqns based on the key type to generate. + * The keygenflags argument is passed to the low level generation functions + * individual for the key type and has a key type specific meaning. When + * generating CCA cipher keys you can use one or more of the PKEY_KEYGEN_* + * flags to widen the export possibilities. By default a cipher key is + * only exportable for CPACF (PKEY_KEYGEN_XPRT_CPAC). + * The keygenflag argument for generating an EP11 AES key should either be 0 + * to use the defaults which are XCP_BLOB_ENCRYPT, XCP_BLOB_DECRYPT and + * XCP_BLOB_PROTKEY_EXTRACTABLE or a valid combination of XCP_BLOB_* flags. + */ +struct pkey_clr2seck2 { + struct pkey_apqn __user *apqns; /* in: ptr to list of apqn targets */ + __u32 apqn_entries; /* in: # of apqn target list entries */ + enum pkey_key_type type; /* in: key type to generate */ + enum pkey_key_size size; /* in: key size to generate */ + __u32 keygenflags; /* in: key generation flags */ + struct pkey_clrkey clrkey; /* in: the clear key value */ + __u8 __user *key; /* in: pointer to key blob buffer */ + __u32 keylen; /* in: available key blob buffer size */ + /* out: actual key blob size */ +}; +#define PKEY_CLR2SECK2 _IOWR(PKEY_IOCTL_MAGIC, 0x12, struct pkey_clr2seck2) + +/* + * Verify the given secure key, version 2. + * Check for correct key type. If cardnr and domain are given (are not + * 0xFFFF) also check if this apqn is able to handle this type of key. + * If cardnr and/or domain is 0xFFFF, on return these values are filled + * with one apqn able to handle this key. + * The function also checks for the master key verification patterns + * of the key matching to the current or alternate mkvp of the apqn. + * For CCA AES secure keys and CCA AES cipher keys this means to check + * the key's mkvp against the current or old mkvp of the apqns. The flags + * field is updated with some additional info about the apqn mkvp + * match: If the current mkvp matches to the key's mkvp then the + * PKEY_FLAGS_MATCH_CUR_MKVP bit is set, if the alternate mkvp matches to + * the key's mkvp the PKEY_FLAGS_MATCH_ALT_MKVP is set. For CCA keys the + * alternate mkvp is the old master key verification pattern. + * CCA AES secure keys are also checked to have the CPACF export allowed + * bit enabled (XPRTCPAC) in the kmf1 field. + * EP11 keys are also supported and the wkvp of the key is checked against + * the current wkvp of the apqns. There is no alternate for this type of + * key and so on a match the flag PKEY_FLAGS_MATCH_CUR_MKVP always is set. + * EP11 keys are also checked to have XCP_BLOB_PROTKEY_EXTRACTABLE set. + * The ioctl returns 0 as long as the given or found apqn matches to + * matches with the current or alternate mkvp to the key's mkvp. If the given + * apqn does not match or there is no such apqn found, -1 with errno + * ENODEV is returned. + */ +struct pkey_verifykey2 { + __u8 __user *key; /* in: pointer to key blob */ + __u32 keylen; /* in: key blob size */ + __u16 cardnr; /* in/out: card number */ + __u16 domain; /* in/out: domain number */ + enum pkey_key_type type; /* out: the key type */ + enum pkey_key_size size; /* out: the key size */ + __u32 flags; /* out: additional key info flags */ +}; +#define PKEY_VERIFYKEY2 _IOWR(PKEY_IOCTL_MAGIC, 0x17, struct pkey_verifykey2) + +/* + * Transform a key blob into a protected key, version 2. + * There needs to be a list of apqns given with at least one entry in there. + * All apqns in the list need to be exact apqns, 0xFFFF as ANY card or domain + * is not supported. The implementation walks through the list of apqns and + * tries to send the request to each apqn without any further checking (like + * card type or online state). If the apqn fails, simple the next one in the + * list is tried until success (return 0) or the end of the list is reached + * (return -1 with errno ENODEV). You may use the PKEY_APQNS4K ioctl to + * generate a list of apqns based on the key. + * Deriving ECC protected keys from ECC secure keys is not supported with + * this ioctl, use PKEY_KBLOB2PROTK3 for this purpose. + */ +struct pkey_kblob2pkey2 { + __u8 __user *key; /* in: pointer to key blob */ + __u32 keylen; /* in: key blob size */ + struct pkey_apqn __user *apqns; /* in: ptr to list of apqn targets */ + __u32 apqn_entries; /* in: # of apqn target list entries */ + struct pkey_protkey protkey; /* out: the protected key */ +}; +#define PKEY_KBLOB2PROTK2 _IOWR(PKEY_IOCTL_MAGIC, 0x1A, struct pkey_kblob2pkey2) + +/* + * Build a list of APQNs based on a key blob given. + * Is able to find out which type of secure key is given (CCA AES secure + * key, CCA AES cipher key, CCA ECC private key, EP11 AES key, EP11 ECC private + * key) and tries to find all matching crypto cards based on the MKVP and maybe + * other criterias (like CCA AES cipher keys need a CEX5C or higher, EP11 keys + * with BLOB_PKEY_EXTRACTABLE need a CEX7 and EP11 api version 4). The list of + * APQNs is further filtered by the key's mkvp which needs to match to either + * the current mkvp (CCA and EP11) or the alternate mkvp (old mkvp, CCA adapters + * only) of the apqns. The flags argument may be used to limit the matching + * apqns. If the PKEY_FLAGS_MATCH_CUR_MKVP is given, only the current mkvp of + * each apqn is compared. Likewise with the PKEY_FLAGS_MATCH_ALT_MKVP. If both + * are given, it is assumed to return apqns where either the current or the + * alternate mkvp matches. At least one of the matching flags needs to be given. + * The flags argument for EP11 keys has no further action and is currently + * ignored (but needs to be given as PKEY_FLAGS_MATCH_CUR_MKVP) as there is only + * the wkvp from the key to match against the apqn's wkvp. + * The list of matching apqns is stored into the space given by the apqns + * argument and the number of stored entries goes into apqn_entries. If the list + * is empty (apqn_entries is 0) the apqn_entries field is updated to the number + * of apqn targets found and the ioctl returns with 0. If apqn_entries is > 0 + * but the number of apqn targets does not fit into the list, the apqn_targets + * field is updatedd with the number of reqired entries but there are no apqn + * values stored in the list and the ioctl returns with ENOSPC. If no matching + * APQN is found, the ioctl returns with 0 but the apqn_entries value is 0. + */ +struct pkey_apqns4key { + __u8 __user *key; /* in: pointer to key blob */ + __u32 keylen; /* in: key blob size */ + __u32 flags; /* in: match controlling flags */ + struct pkey_apqn __user *apqns; /* in/out: ptr to list of apqn targets*/ + __u32 apqn_entries; /* in: max # of apqn entries in the list */ + /* out: # apqns stored into the list */ +}; +#define PKEY_APQNS4K _IOWR(PKEY_IOCTL_MAGIC, 0x1B, struct pkey_apqns4key) + +/* + * Build a list of APQNs based on a key type given. + * Build a list of APQNs based on a given key type and maybe further + * restrict the list by given master key verification patterns. + * For different key types there may be different ways to match the + * master key verification patterns. For CCA keys (CCA data key and CCA + * cipher key) the first 8 bytes of cur_mkvp refer to the current AES mkvp value + * of the apqn and the first 8 bytes of the alt_mkvp refer to the old AES mkvp. + * For CCA ECC keys it is similar but the match is against the APKA current/old + * mkvp. The flags argument controls if the apqns current and/or alternate mkvp + * should match. If the PKEY_FLAGS_MATCH_CUR_MKVP is given, only the current + * mkvp of each apqn is compared. Likewise with the PKEY_FLAGS_MATCH_ALT_MKVP. + * If both are given, it is assumed to return apqns where either the + * current or the alternate mkvp matches. If no match flag is given + * (flags is 0) the mkvp values are ignored for the match process. + * For EP11 keys there is only the current wkvp. So if the apqns should also + * match to a given wkvp, then the PKEY_FLAGS_MATCH_CUR_MKVP flag should be + * set. The wkvp value is 32 bytes but only the leftmost 16 bytes are compared + * against the leftmost 16 byte of the wkvp of the apqn. + * The list of matching apqns is stored into the space given by the apqns + * argument and the number of stored entries goes into apqn_entries. If the list + * is empty (apqn_entries is 0) the apqn_entries field is updated to the number + * of apqn targets found and the ioctl returns with 0. If apqn_entries is > 0 + * but the number of apqn targets does not fit into the list, the apqn_targets + * field is updatedd with the number of reqired entries but there are no apqn + * values stored in the list and the ioctl returns with ENOSPC. If no matching + * APQN is found, the ioctl returns with 0 but the apqn_entries value is 0. + */ +struct pkey_apqns4keytype { + enum pkey_key_type type; /* in: key type */ + __u8 cur_mkvp[32]; /* in: current mkvp */ + __u8 alt_mkvp[32]; /* in: alternate mkvp */ + __u32 flags; /* in: match controlling flags */ + struct pkey_apqn __user *apqns; /* in/out: ptr to list of apqn targets*/ + __u32 apqn_entries; /* in: max # of apqn entries in the list */ + /* out: # apqns stored into the list */ +}; +#define PKEY_APQNS4KT _IOWR(PKEY_IOCTL_MAGIC, 0x1C, struct pkey_apqns4keytype) + +/* + * Transform a key blob into a protected key, version 3. + * The difference to version 2 of this ioctl is that the protected key + * buffer is now explicitly and not within a struct pkey_protkey any more. + * So this ioctl is also able to handle EP11 and CCA ECC secure keys and + * provide ECC protected keys. + * There needs to be a list of apqns given with at least one entry in there. + * All apqns in the list need to be exact apqns, 0xFFFF as ANY card or domain + * is not supported. The implementation walks through the list of apqns and + * tries to send the request to each apqn without any further checking (like + * card type or online state). If the apqn fails, simple the next one in the + * list is tried until success (return 0) or the end of the list is reached + * (return -1 with errno ENODEV). You may use the PKEY_APQNS4K ioctl to + * generate a list of apqns based on the key. + */ +struct pkey_kblob2pkey3 { + __u8 __user *key; /* in: pointer to key blob */ + __u32 keylen; /* in: key blob size */ + struct pkey_apqn __user *apqns; /* in: ptr to list of apqn targets */ + __u32 apqn_entries; /* in: # of apqn target list entries */ + __u32 pkeytype; /* out: prot key type (enum pkey_key_type) */ + __u32 pkeylen; /* in/out: size of pkey buffer/actual len of pkey */ + __u8 __user *pkey; /* in: pkey blob buffer space ptr */ +}; +#define PKEY_KBLOB2PROTK3 _IOWR(PKEY_IOCTL_MAGIC, 0x1D, struct pkey_kblob2pkey3) + +#endif /* _UAPI_PKEY_H */ -- cgit v1.2.3